XC4VLX25-11FFG676C - 24,192-Cell FPGA | AMD Xilinx
MPN: XC4VLX25-11FFG676C ✗ اختتامِ زندگیXC4VLX25-11FFG676C جائزہ
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and programmable I/O behavior are configured after manufacture. FPGA technology sits within the broader programmable-logic hierarchy and provides parallel hardware implementation of control, data-processing, communications, and signal-generation functions. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for multiple designs and design revisions, which is valuable in legacy control systems, industrial equipment, communications infrastructure, and test platforms.
Key device resources include 24,192 logic cells, 2,688 configurable logic blocks, 448 user I/O pins, and 1,327,104 bits of RAM. The 448 I/O pins provide extensive parallel connectivity for external memory, data buses, clocks, control signals, and high-speed interfaces. The large 676-ball FCBGA package also supports power delivery and signal routing requirements that cannot be met as economically by a small leaded or small-outline package.
The XC4VLX25 belongs to the Virtex-4 LX architecture and is manufactured using 90 nm CMOS technology. Its logic fabric can implement combinational and sequential digital functions, while dedicated block RAM supports buffering, packet storage, data alignment, and other finite-state storage. The core supply is 1.2 V, with additional power rails required by the selected I/O standards. Configuration, clocking, power sequencing, and pin constraints must be managed through the associated Xilinx ISE design flow.
Typical uses include industrial automation controllers, communications equipment, video-processing subsystems, instrumentation platforms, legacy network appliances, and embedded systems that require deterministic parallel logic. The device is particularly appropriate when an existing design uses the Virtex-4 LX package, pinout, and bitstream ecosystem and needs an equivalent source for an exact MPN.
For a new PCB, use the official Virtex-4 package pinout file when assigning every ball, power rail, configuration signal, and I/O standard. Check the selected I/O voltage domains against the bank requirements before finalizing the schematic. Because this is a legacy FPGA, tooling availability, configuration memory, and component lifecycle should be reviewed before committing a new production design.
This page organizes the device's FPGA resources, package information, direct replacement options, and practical engineering considerations into one engineering reference. It also distinguishes genuine same-package replacements from devices that use different ball counts or footprints, helping prevent an electrically similar part from being selected for a PCB that requires pin-to-pin compatibility.
کے لیے ڈراپ اِن متبادل XC4VLX25-11FFG676C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC4VLX25-11FFG676C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core Supply Voltage, Device Type, Mounting Type, Configurable Logic Blocks.
XC4VLX25-11FFG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VLX25-11FF676C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VLX25-12FFG676C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VLX25-10FFG676C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VLX25-10FF676C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VLX25-11FFG676C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 blocks |
| User I/O Pins | 448 pins |
| Block RAM | 1,327,104 bits |
| Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| پیکیج | 676-pin FCBGA |
| Package Type | Fine-Pitch Ball Grid Array |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Performance Grade | -11 speed grade |
| Temperature Grade | Commercial grade |
| AEC-Q100 Qualification | Not applicable |
XC4VLX25-11FFG676C fine-pitch ball grid array پن کنفیگریشن گائیڈ
XC4VLX25-11FFG676C (fine-pitch ball grid array پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC4VLX25-11FFG676C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC4VLX25-11FFG676C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controller, Communications Line Card, Video Processing Subsystem, Test and Measurement Platform, Network Appliance and Protocol Bridge, Legacy Equipment Maintenance.
Industrial Automation Controller
The XC4VLX25-11FFG676C fits an industrial automation controller that must combine parallel machine I/O, sequencing logic, communication buffering, and deterministic control functions. Its 448 user I/O pins provide ample connections for sensors, actuators, encoders, field buses, and operator interfaces, while 2,688 configurable logic blocks and 24,192 logic cells can implement control algorithms and protocol state machines. The 676-pin FCBGA also supports the pin density required by these mixed signal and digital subsystems. Use the -11 grade only when the commercial operating-temperature range covers the machine environment; otherwise choose the industrial-temperature XC4VLX25-11FFG676I. Power sequencing and bank-specific I/O voltage verification remain essential before production release.
تجویز کردہ
Communications Line Card
The XC4VLX25-11FFG676C is suitable for a communications line card requiring parallel data-plane logic, deep packet buffering, and a large number of external interfaces. The device supplies 1,327,104 bits of block RAM for FIFO, packet, and alignment functions, together with 448 I/O pins for parallel buses and control channels. Its 24,192 logic cells can support framing, multiplexing, checks, and protocol adaptation without requiring multiple large FPGAs. For designs migrating to newer network interfaces, the legacy device may require external PHY devices and careful clocking analysis. Board designers should use controlled clocks, terminated I/O standards, and a power grid capable of supporting the FCBGA's core and auxiliary supply requirements.
تجویز کردہ
Video Processing Subsystem
The XC4VLX25-11FFG676C can implement legacy video timing, pixel transport, color processing, and test-pattern generation in a programmable subsystem. Its 448 user I/O pins are useful for parallel pixel buses, synchronization signals, and control interfaces, while the programmable logic fabric can pipeline multi-stage transformations. Block RAM can hold line buffers, lookup tables, or frame references, subject to the device's 1,327,104-bit total capacity. Because this is a Virtex-4 LX device rather than a dedicated video processor, the implementation depends on generic logic and I/O resources. Use source-synchronous layout practices where supported, constrain all video clocks, and validate signal-integrity behavior with the selected I/O standard and board stack-up.
تجویز کردہ
Test and Measurement Platform
The XC4VLX25-11FFG676C fits a test instrument that needs programmable sequencing, pattern generation, acquisition control, and extensive parallel connectivity. The 24,192 logic cells and 2,688 configurable logic blocks can host timing engines, digital state machines, and embedded control functions, while 448 I/O pins support DUT stimulus, response capture, and instrumentation buses. The 1,327,104 bits of block RAM provide local storage for captured vectors and working buffers. Instrument designers should partition I/O banks by voltage requirement, minimize switching current around the FCBGA, and implement clocking with low-skew routing. For new products, verify that the legacy synthesis, simulation, and programming toolchain remains accessible to the development team.
تجویز کردہ
Network Appliance and Protocol Bridge
The XC4VLX25-11FFG676C can serve as a programmable protocol bridge between legacy parallel buses and a high-speed serial interface. Its large user I/O count supports parallel buses and control signals, and its block RAM can implement dual-clock FIFOs where clock domains differ. The programmable fabric can add framing, error detection, buffering, and traffic prioritization. Because the device belongs to a mature architecture, engineers must confirm availability of the required device drivers, bit-generation utilities, and programming hardware. Board implementation should include careful clock-plane routing, source-synchronous output constraints, and power sequencing that satisfies the core, auxiliary, and I/O rails. A newer FPGA should be considered when long-term tool support or security updates are decisive requirements.
تجویز کردہ
Legacy Equipment Maintenance
The XC4VLX25-11FFG676C is particularly relevant to maintenance programs for industrial, telecommunications, or test equipment originally designed around the Virtex-4 LX family. Its 448 I/O pins, 24,192 logic cells, and 676-ball package allow an exact-footprint replacement strategy without changing the surrounding board layout. When the original design uses a -11 timing class and commercial temperature conditions, the target ordering code preserves the original functional intent. A complete replacement evaluation must still include bitstream compatibility, configuration memory, pin constraints, auxiliary supplies, and thermal conditions. Obtaining traceable stock and retaining design files is especially important because new Virtex-4 LX fabrication is not a current roadmap activity.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC4VLX25-11FFG676C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC4VLX25-11FFG676I | XC4VLX25-11FF676C | XC4VLX25-12FFG676C | XC4VLX25-10FFG676C |
|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 676-pin FCBGA | 676-pin FCBGA - same | 676-pin FCBGA - same | 676-pin FCBGA - same | 676-pin FCBGA - same |
| Performance Grade | -11 | -11 - same speed class | -11 - same speed class | -12 - slower grade | -10 - faster grade |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial | Commercial |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 blocks | 2,688 blocks | 2,688 blocks | 2,688 blocks | 2,688 blocks |
| Block RAM | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| User I/O Pins | 448 pins | 448 pins | 448 pins | 448 pins | 448 pins |
| Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
اہم امتیازی خصوصیات
- Exact 676-ball package retention (بمقابلہXC4VLX25-11FFG676I)
- Industrial-temperature alternative (بمقابلہXC4VLX25-11FFG676I)
- Timing-class options within the same family (بمقابلہXC4VLX25-12FFG676C)
- Higher timing performance without changing the footprint (بمقابلہXC4VLX25-10FFG676C)
ڈیزائن نوٹس
Treat the 676-ball FCBGA as a high-pin-count fine-pitch design with separate core, auxiliary, and I/O supply domains. Assign every ball from the official AMD package pinout file, then cross-check the constraints against the selected Virtex-4 LX data sheet. Place the required decoupling capacitance at the associated power and ground balls, provide low-impedance power and ground planes, and use via arrays that maintain current capacity without interfering with high-speed escape routing.
Preserve signal integrity by separating clocks, high-speed buses, and sensitive configuration signals from noisy power-switching paths. Match length and propagation delay according to the interface standard, use source-synchronous constraints where required, and avoid routing signals through split plane boundaries. The device's 448 user I/O pins can create dense escape routing, so stack-up and microvia decisions should be completed before the component placement and fanout are frozen.
Do not treat an XC4VLX25 device with a different ball count as an equivalent replacement. XC4VLX25-11FFG668C has a 668-ball package and XC4VLX25-11SFG363C has a 363-ball package; neither shares the 676-ball footprint. Before replacing the target, verify the exact ballout, bank voltages, configuration pins, clock-capable pins, memory interfaces, and bitstream compatibility. Speed-grade changes also require timing revalidation.
Plan the complete power-up sequence across the 1.2 V core supply, auxiliary supply, and all I/O banks. Use the manufacturer's power-consumption and decoupling guidance for the selected speed, temperature, and utilization condition. Under worst-case switching activity, verify voltage droop and junction-temperature margin on the assembled board rather than relying only on average FPGA power. Add current-headroom analysis for expansion-board systems and maintain sequencing behavior during brownout and restart events.
تعمیل کی معلومات
The FFG package suffix indicates the lead-free-oriented ordering form, but explicit RoHS, REACH, halogen-free, and conflict-minerals declarations were not present in the cited product material. AEC-Q100 is not applicable to this general-purpose commercial FPGA.