XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD
MPN: XC7K160T-L2FBG484I ✓ فعالXC7K160T-L2FBG484I جائزہ
A Kintex-7 FPGA is a programmable semiconductor in the FPGA and CPLD hierarchy, combining configurable logic, block RAM, programmable input/output resources, digital signal processing resources, and high-speed serial transceivers. Within the broader semiconductor and programmable-logic categories, a Kintex-7 device bridges general-purpose FPGA implementation and higher-density signal-processing designs. Its architecture supports parallel logic, embedded memory, clock management, and serial connectivity within one configurable device.
The principal benefit of the -2L grade is its lower static and dynamic power profile relative to the standard -2 speed grade. The industrial-temperature suffix I supports operation from -40°C to +100°C, while the 484-ball FCBGA provides 285 I/O and extensive interconnect resources. These characteristics support industrial control, communications infrastructure, test equipment, embedded signal processing, and high-speed data acquisition systems where logic density, I/O availability, and power behavior matter more than the maximum timing performance of the -3 grade.
The Kintex-7 architecture is implemented on a 28 nm process and belongs to the Xilinx 7-series device family. The -2L grade is specifically screened for lower maximum static power and can use lower core voltage than -2 devices, reducing energy per processed bit in designs with substantial dynamic activity. Designers should still evaluate board-level power, configured resource utilization, I/O standards, clocking, and thermal rise during system implementation.
Typical uses include industrial Ethernet and control systems, network interface equipment, high-speed serial processing, telemetry, radar signal paths, digital instrumentation, and embedded communications platforms. The 285 available I/O support parallel interfaces and multiple voltage domains, while programmable logic and block memory allow protocol handling, data buffering, filtering, and state-machine control to be consolidated into one FPGA.
PCB implementation requires careful attention to the 484-ball land pattern, power decoupling, clock integrity, and high-speed routing. Follow the AMD package, schematic, and configuration guidance for ball assignments and supported I/O standards. Validate pin assignments, differential routing, supply sequencing, and thermal performance in the target enclosure before releasing production hardware.
This page combines device-level electrical limits, package constraints, practical integration guidance, and same-footprint Kintex-7 alternatives. It also provides search-focused pinout, datasheet, replacement, and design-reference information for engineers evaluating the XC7K160T-L2FBG484I against other -1, -2, -2L, and -3 speed and temperature configurations.
کے لیے ڈراپ اِن متبادل XC7K160T-L2FBG484I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7K160T-L2FBG484I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Speed Grade, Temperature Grade, Device Type, Package, Mounting Type.
XC7K160T-2FBG484I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7K160T-2FBG484C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7K160T-1FBG484I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7K160T-1FBG484C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7K160T-3FBG484E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7K160T-L2FBG484I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Process Technology | 28 nm |
| Logic Cells | 162,240 cells |
| Flip-Flops | 11,808,000 flip-flops |
| Input/Output Count | 285 I/O |
| پیکیج | 484-ball FCBGA |
| Speed Grade | -2L |
| Temperature Grade | Industrial, -40°C to +100°C |
| Nominal Core Supply | 0.95 V |
| Core Supply Minimum | 0.93 V |
| Core Supply Maximum | 0.97 V |
| Static-Power Screening | -2L grade screened for lower maximum static power |
| Dynamic-Power Behavior | Can operate at lower core voltage than the -2 grade |
| ماؤنٹنگ ٹائپ | Surface mount |
XC7K160T-L2FBG484I 484-ball fcbga پن کنفیگریشن گائیڈ
XC7K160T-L2FBG484I (484-ball fcbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7K160T-L2FBG484I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7K160T-L2FBG484I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Systems, Industrial Networking Equipment, Test and Measurement Equipment, Telemetry and Communication Platforms, High-Speed Data Acquisition, Embedded Vision and Video Processing.
Industrial Control Systems
The XC7K160T-L2FBG484I fits industrial controllers that need deterministic programmable logic, extensive I/O, and controlled power behavior across a -40°C to +100°C ambient range. Its 162,240 logic cells and 285 I/O can consolidate motion sequencing, interlocks, counters, communication handling, and safety-adjacent control logic without requiring multiple programmable devices. The -2L grade is especially attractive where sustained switching activity makes dynamic power important, because AMD indicates that it can operate at lower core voltage than the standard -2 grade. In implementation, use the 484-ball FCBGA footprint, apply recommended core and I/O decoupling, and verify timing margin for the selected -2L operating conditions.
تجویز کردہ
Industrial Networking Equipment
The XC7K160T-L2FBG484I is suitable for industrial Ethernet gateways, protocol analyzers, and network interface equipment requiring parallel packet processing and high-speed serial connectivity. Its 285 I/O provide attachment points for multiple interface levels, while the large Kintex-7 logic fabric can support buffering, classification, time stamping, and state-machine-heavy protocols. The lower-power -2L characterization is valuable in continuously active network equipment where the system must balance throughput with thermal output. Board design should preserve signal integrity through controlled-impedance routing, maintain clock jitter margin, and follow AMD's decoupling and high-speed I/O guidance for the 484-ball FCBGA.
تجویز کردہ
Test and Measurement Equipment
XC7K160T-L2FBG484I-based instruments can combine acquisition logic, pattern generation, real-time processing, timing control, and interface management in one FPGA. The approximately 162,240 logic cells provide substantial parallelism for digital channel logic and control, while 285 I/O allow the instrument to connect multiple front-end and backplane interfaces. The -2L grade supports systems in which sustained clocking and switching would otherwise increase power and thermal load. For laboratory equipment, validate deterministic clocking, low-skew routing, simultaneous switching behavior, and calibration stability across the -40°C to +100°C operating range before production.
تجویز کردہ
Telemetry and Communication Platforms
The XC7K160T-L2FBG484I can serve as the programmable backbone of telemetry, radio-control, and embedded communication equipment. Its large logic fabric supports framing, filtering, scheduling, modulation-support logic, and multi-interface coordination, while the 285 I/O provide flexible connectivity to converters, transceivers, memory, and supervisory circuitry. The -2L grade is advantageous in remote or unattended installations where lower core voltage and reduced power behavior can improve the thermal and energy budget. A robust design should partition high-speed and sensitive routing, use multiple decoupling points near the BGA power balls, and verify the serial transceiver, reference clock, and reset architecture using the exact AMD device documentation.
تجویز کردہ
High-Speed Data Acquisition
The XC7K160T-L2FBG484I is appropriate for data-acquisition systems that must move parallel or serial data through substantial real-time logic. The 285 I/O support connection to ADCs, DACs, memory, and synchronization interfaces, while 162,240 logic cells allow filtering, binning, triggering, and buffering functions to be implemented in parallel. The -2L speed and power combination gives designers a lower-power alternative to the standard -2 grade when acquisition channels operate continuously. Practical implementation should emphasize terminated interfaces, matched clock distribution, clean separation between analog and digital return paths, and thermal testing at the maximum expected data rate and ambient temperature.
تجویز کردہ
Embedded Vision and Video Processing
The XC7K160T-L2FBG484I can support embedded image pipelines that require parallel pixel processing, frame timing, buffer management, and programmable interfaces. Its 285 I/O provide connections to image sensors, memory, display or transmission blocks, while the Kintex-7 logic fabric supports parallel pipelines and real-time filtering. The lower-power -2L grade is valuable in compact camera and inspection systems where sustained image traffic can create significant dynamic load. Design work should include lane-to-lane skew analysis, deterministic pixel-clock routing, FPGA-to-memory interface optimization, and separate power considerations for high-speed I/O and the 0.95 V nominal core rail.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7K160T-L2FBG484I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7K160T-2FBG484I | XC7K160T-2FBG484C | XC7K160T-1FBG484I | XC7K160T-1FBG484C | XC7K160T-3FBG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA |
| Speed Grade | -2L | -2 | -2 | -1 | -1 | -3 |
| Temperature Grade | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Commercial | Industrial, -40°C to +100°C | Commercial | Extended temperature |
| Power Class | -2L, screened for lower maximum static power | Standard -2 | Standard -2 | -1 | -1 | -3 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Input/Output Count | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
اہم امتیازی خصوصیات
- Lower-power -2L characterization (بمقابلہXC7K160T-2FBG484I)
- Retains the -2 timing class with industrial temperature coverage (بمقابلہXC7K160T-2FBG484C)
- Higher performance class than -1 alternatives (بمقابلہXC7K160T-1FBG484I)
- Lower power emphasis than the -3 grade (بمقابلہXC7K160T-3FBG484E)
ڈیزائن نوٹس
Use the -2L power characterization as a design-selection advantage, not as permission to omit power analysis. AMD states that -2L devices are screened for lower maximum static power and can operate at lower core voltage than -2 devices. Calculate worst-case demand across the configured logic, block RAM, DSP, I/O, transceivers, configuration path, and auxiliary rails. Validate the selected core voltage against timing closure and use the manufacturer power-estimation methodology with realistic switching activity before approving the supply design.
Follow the AMD 484-ball FCBGA footprint and layer-transition guidance exactly, including pad geometry, solder-mask definition, via placement, and assembly constraints. Place the required core and I/O decoupling capacitors close to their associated BGA power balls, and provide low-impedance planes or via-fanout for each supply domain. The package's 285 I/O and numerous supply balls make layer count, return-path continuity, and thermal-via distribution central to both signal integrity and power-integrity performance.
Assign signals from the exact package pin-description tables rather than from a generic 484-BBGA symbol. Verify every high-speed interface for the supported I/O standard, bank voltage, and -2L timing conditions. Use short reference-clock routes with controlled impedance, maintain return paths beneath high-speed pairs, and apply the documented de-emphasis or output-swing settings only after signal-integrity analysis. Simulate worst-case board loss, connector transitions, clock jitter, and simultaneous switching before releasing the layout.
Estimate junction temperature from total device dissipation, package thermal characteristics, and the actual PCB copper area rather than relying only on the nominal BGA footprint. Dynamic power can rise with clock, I/O activity, and configured resource use, while static power remains present even when the design is logically idle. Use the -2L advantage to improve the thermal budget, then validate the assembled board at maximum ambient temperature with the expected clocking and I/O traffic. Provide airflow or copper spreading only after the enclosure-level thermal test.
تعمیل کی معلومات
The industrial temperature suffix identifies the environmental grade but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these attributes with the manufacturer for the exact orderable MPN before procurement.