XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD
MPN: XC7K160T-L2FBG484I ✓ Hoạt độngXC7K160T-L2FBG484I Tóm tắt
A Kintex-7 FPGA is a programmable semiconductor in the FPGA and CPLD hierarchy, combining configurable logic, block RAM, programmable input/output resources, digital signal processing resources, and high-speed serial transceivers. Within the broader semiconductor and programmable-logic categories, a Kintex-7 device bridges general-purpose FPGA implementation and higher-density signal-processing designs. Its architecture supports parallel logic, embedded memory, clock management, and serial connectivity within one configurable device.
The principal benefit of the -2L grade is its lower static and dynamic power profile relative to the standard -2 speed grade. The industrial-temperature suffix I supports operation from -40°C to +100°C, while the 484-ball FCBGA provides 285 I/O and extensive interconnect resources. These characteristics support industrial control, communications infrastructure, test equipment, embedded signal processing, and high-speed data acquisition systems where logic density, I/O availability, and power behavior matter more than the maximum timing performance of the -3 grade.
The Kintex-7 architecture is implemented on a 28 nm process and belongs to the Xilinx 7-series device family. The -2L grade is specifically screened for lower maximum static power and can use lower core voltage than -2 devices, reducing energy per processed bit in designs with substantial dynamic activity. Designers should still evaluate board-level power, configured resource utilization, I/O standards, clocking, and thermal rise during system implementation.
Typical uses include industrial Ethernet and control systems, network interface equipment, high-speed serial processing, telemetry, radar signal paths, digital instrumentation, and embedded communications platforms. The 285 available I/O support parallel interfaces and multiple voltage domains, while programmable logic and block memory allow protocol handling, data buffering, filtering, and state-machine control to be consolidated into one FPGA.
PCB implementation requires careful attention to the 484-ball land pattern, power decoupling, clock integrity, and high-speed routing. Follow the AMD package, schematic, and configuration guidance for ball assignments and supported I/O standards. Validate pin assignments, differential routing, supply sequencing, and thermal performance in the target enclosure before releasing production hardware.
This page combines device-level electrical limits, package constraints, practical integration guidance, and same-footprint Kintex-7 alternatives. It also provides search-focused pinout, datasheet, replacement, and design-reference information for engineers evaluating the XC7K160T-L2FBG484I against other -1, -2, -2L, and -3 speed and temperature configurations.
Bộ thay thế dễ dàng lắp đặt cho XC7K160T-L2FBG484I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K160T-L2FBG484I (cùng hình factor và footprint) — khác nhau ở Speed Grade, Temperature Grade, Device Type, Package, Mounting Type.
XC7K160T-2FBG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K160T-2FBG484C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K160T-1FBG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K160T-1FBG484C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K160T-3FBG484E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K160T-L2FBG484I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Process Technology | 28 nm |
| Logic Cells | 162,240 cells |
| Flip-Flops | 11,808,000 flip-flops |
| Input/Output Count | 285 I/O |
| Hộp | 484-ball FCBGA |
| Speed Grade | -2L |
| Temperature Grade | Industrial, -40°C to +100°C |
| Nominal Core Supply | 0.95 V |
| Core Supply Minimum | 0.93 V |
| Core Supply Maximum | 0.97 V |
| Static-Power Screening | -2L grade screened for lower maximum static power |
| Dynamic-Power Behavior | Can operate at lower core voltage than the -2 grade |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC7K160T-L2FBG484I 484-ball fcbga
Cấu hình chân cho XC7K160T-L2FBG484I (484-ball fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K160T-L2FBG484I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K160T-L2FBG484I phù hợp cho 6 Áp dụngs: Industrial Control Systems, Industrial Networking Equipment, Test and Measurement Equipment, Telemetry and Communication Platforms, High-Speed Data Acquisition, Embedded Vision and Video Processing.
Industrial Control Systems
The XC7K160T-L2FBG484I fits industrial controllers that need deterministic programmable logic, extensive I/O, and controlled power behavior across a -40°C to +100°C ambient range. Its 162,240 logic cells and 285 I/O can consolidate motion sequencing, interlocks, counters, communication handling, and safety-adjacent control logic without requiring multiple programmable devices. The -2L grade is especially attractive where sustained switching activity makes dynamic power important, because AMD indicates that it can operate at lower core voltage than the standard -2 grade. In implementation, use the 484-ball FCBGA footprint, apply recommended core and I/O decoupling, and verify timing margin for the selected -2L operating conditions.
Được đề xuất
Industrial Networking Equipment
The XC7K160T-L2FBG484I is suitable for industrial Ethernet gateways, protocol analyzers, and network interface equipment requiring parallel packet processing and high-speed serial connectivity. Its 285 I/O provide attachment points for multiple interface levels, while the large Kintex-7 logic fabric can support buffering, classification, time stamping, and state-machine-heavy protocols. The lower-power -2L characterization is valuable in continuously active network equipment where the system must balance throughput with thermal output. Board design should preserve signal integrity through controlled-impedance routing, maintain clock jitter margin, and follow AMD's decoupling and high-speed I/O guidance for the 484-ball FCBGA.
Được đề xuất
Test and Measurement Equipment
XC7K160T-L2FBG484I-based instruments can combine acquisition logic, pattern generation, real-time processing, timing control, and interface management in one FPGA. The approximately 162,240 logic cells provide substantial parallelism for digital channel logic and control, while 285 I/O allow the instrument to connect multiple front-end and backplane interfaces. The -2L grade supports systems in which sustained clocking and switching would otherwise increase power and thermal load. For laboratory equipment, validate deterministic clocking, low-skew routing, simultaneous switching behavior, and calibration stability across the -40°C to +100°C operating range before production.
Được đề xuất
Telemetry and Communication Platforms
The XC7K160T-L2FBG484I can serve as the programmable backbone of telemetry, radio-control, and embedded communication equipment. Its large logic fabric supports framing, filtering, scheduling, modulation-support logic, and multi-interface coordination, while the 285 I/O provide flexible connectivity to converters, transceivers, memory, and supervisory circuitry. The -2L grade is advantageous in remote or unattended installations where lower core voltage and reduced power behavior can improve the thermal and energy budget. A robust design should partition high-speed and sensitive routing, use multiple decoupling points near the BGA power balls, and verify the serial transceiver, reference clock, and reset architecture using the exact AMD device documentation.
Được đề xuất
High-Speed Data Acquisition
The XC7K160T-L2FBG484I is appropriate for data-acquisition systems that must move parallel or serial data through substantial real-time logic. The 285 I/O support connection to ADCs, DACs, memory, and synchronization interfaces, while 162,240 logic cells allow filtering, binning, triggering, and buffering functions to be implemented in parallel. The -2L speed and power combination gives designers a lower-power alternative to the standard -2 grade when acquisition channels operate continuously. Practical implementation should emphasize terminated interfaces, matched clock distribution, clean separation between analog and digital return paths, and thermal testing at the maximum expected data rate and ambient temperature.
Được đề xuất
Embedded Vision and Video Processing
The XC7K160T-L2FBG484I can support embedded image pipelines that require parallel pixel processing, frame timing, buffer management, and programmable interfaces. Its 285 I/O provide connections to image sensors, memory, display or transmission blocks, while the Kintex-7 logic fabric supports parallel pipelines and real-time filtering. The lower-power -2L grade is valuable in compact camera and inspection systems where sustained image traffic can create significant dynamic load. Design work should include lane-to-lane skew analysis, deterministic pixel-clock routing, FPGA-to-memory interface optimization, and separate power considerations for high-speed I/O and the 0.95 V nominal core rail.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K160T-L2FBG484I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K160T-2FBG484I | XC7K160T-2FBG484C | XC7K160T-1FBG484I | XC7K160T-1FBG484C | XC7K160T-3FBG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA | 484-ball FCBGA |
| Speed Grade | -2L | -2 | -2 | -1 | -1 | -3 |
| Temperature Grade | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Commercial | Industrial, -40°C to +100°C | Commercial | Extended temperature |
| Power Class | -2L, screened for lower maximum static power | Standard -2 | Standard -2 | -1 | -1 | -3 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Input/Output Count | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Bảo phân biệt quan trọng
- Lower-power -2L characterization (vsXC7K160T-2FBG484I)
- Retains the -2 timing class with industrial temperature coverage (vsXC7K160T-2FBG484C)
- Higher performance class than -1 alternatives (vsXC7K160T-1FBG484I)
- Lower power emphasis than the -3 grade (vsXC7K160T-3FBG484E)
Ghi chú thiết kế
Use the -2L power characterization as a design-selection advantage, not as permission to omit power analysis. AMD states that -2L devices are screened for lower maximum static power and can operate at lower core voltage than -2 devices. Calculate worst-case demand across the configured logic, block RAM, DSP, I/O, transceivers, configuration path, and auxiliary rails. Validate the selected core voltage against timing closure and use the manufacturer power-estimation methodology with realistic switching activity before approving the supply design.
Follow the AMD 484-ball FCBGA footprint and layer-transition guidance exactly, including pad geometry, solder-mask definition, via placement, and assembly constraints. Place the required core and I/O decoupling capacitors close to their associated BGA power balls, and provide low-impedance planes or via-fanout for each supply domain. The package's 285 I/O and numerous supply balls make layer count, return-path continuity, and thermal-via distribution central to both signal integrity and power-integrity performance.
Assign signals from the exact package pin-description tables rather than from a generic 484-BBGA symbol. Verify every high-speed interface for the supported I/O standard, bank voltage, and -2L timing conditions. Use short reference-clock routes with controlled impedance, maintain return paths beneath high-speed pairs, and apply the documented de-emphasis or output-swing settings only after signal-integrity analysis. Simulate worst-case board loss, connector transitions, clock jitter, and simultaneous switching before releasing the layout.
Estimate junction temperature from total device dissipation, package thermal characteristics, and the actual PCB copper area rather than relying only on the nominal BGA footprint. Dynamic power can rise with clock, I/O activity, and configured resource use, while static power remains present even when the design is logically idle. Use the -2L advantage to improve the thermal budget, then validate the assembled board at maximum ambient temperature with the expected clocking and I/O traffic. Provide airflow or copper spreading only after the enclosure-level thermal test.
Thông tin tuân thủ
The industrial temperature suffix identifies the environmental grade but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these attributes with the manufacturer for the exact orderable MPN before procurement.