Infineon

XMC1201T038F0200ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon

MPN: XMC1201T038F0200ABXUMA1 ✗ اختتامِ زندگی
1.8 V to 5.5 V Vdss PG-TSSOP-38-9 Package 32 MHz Speed 200 KB Memory
MOQ: 1 |

XMC1201T038F0200ABXUMA1 جائزہ

The Infineon Technologies XMC1201T038F0200ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at up to 32 MHz, with 200 KB of Flash memory, 16 KB of SRAM, and 34 general-purpose I/O lines in a 38-terminal PG-TSSOP-38-9 package. Its 1.8 V to 5.5 V operating supply range supports low-voltage industrial, consumer, and embedded-control applications.

An industrial microcontroller is a semiconductor device that combines a programmable processor core, embedded nonvolatile memory, data memory, and peripherals on one integrated circuit. The Infineon XMC1200 series belongs to the XMC1000 microcontroller family and uses the ARM Cortex-M0 processor core within the hierarchy of 32-bit MCU, embedded microcontroller, and integrated semiconductor. This architecture combines deterministic control, efficient event-based operation, and compact code execution without requiring an external memory bus.

The XMC1201T038F0200ABXUMA1 provides 200 KB of Flash for firmware and 16 KB of SRAM for working data and stack requirements. Its integrated ADC has 12-bit resolution, while 34 I/O lines support digital inputs, outputs, timers, communications, and control functions. The device is specified for an industrial temperature range of -40°C to 85°C and a supply-voltage range of 1.8 V to 5.5 V.

The 32 MHz Cortex-M0 core provides a practical balance of processing throughput, power efficiency, and software simplicity for cost-sensitive embedded systems. Peripheral partitioning allows real-time control tasks to coexist with communications and analog measurement. Its 12-bit ADC is suitable for monitoring sensors and process variables where greater resolution is unnecessary, while the 34 available I/O lines reduce the need for external I/O expansion in compact designs.

Typical applications include industrial sensor controllers, building automation modules, appliance control boards, motor and relay-control systems, battery-powered monitoring equipment, and compact communication peripherals. The XMC1201 family is particularly useful when a design needs deterministic control from a 1.8 V to 5.5 V supply while retaining embedded Flash and a moderate number of general-purpose I/O pins.

PCB planning should account for the 38-terminal PG-TSSOP-38-9 land pattern, exposed thermal-pad requirements, and the pin-assignment table in the manufacturer package drawing. Decoupling and analog-ground layout should follow the recommended application circuit, while exposed-pad copper improves thermal performance without introducing high-frequency switching noise into sensitive measurements.

This product resource combines the Infineon ordering information, memory and analog specifications, package details, lifecycle status, drop-in alternatives, comparison parameters, and practical implementation guidance to support component selection and PCB design for XMC1200-series industrial control systems.

کے لیے ڈراپ اِن متبادل XMC1201T038F0200ABXUMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

XMC1201-T038F0200-AB

✅ ڈراپ-اِن
📦 PG-TSSOP-38-9
Same 32 MHz core, 200 KB Flash, 16 KB SRAM, and PG-TSSOP-38-9 package; ordering-code presentation differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XMC1201T038F0200ABXUMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit industrial microcontroller
Processor Core ARM Cortex-M0
CPU Architecture 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 200 KB
Flash Organization 200K x 8
SRAM 16 KB
Operating Supply Voltage Range 1.8 V to 5.5 V
آپریٹنگ درجہ حرارت رینج -40°C to 85°C
ADC Resolution 12 bit
General-Purpose I/O Lines 34
Integrated ADC Yes
پیکیج PG-TSSOP-38-9
Terminal Count 38 terminals
ماؤنٹنگ ٹائپ Surface mount
Product Series XMC1200 series
Product Family XMC1000 family
Qualification Segment Industrial
RoHS اسٹیٹس Details available from manufacturer
Package Thermal Pad Exposed pad
لائف سائیکل کی حالت Obsolete

XMC1201T038F0200ABXUMA1 exposed pad پن کنفیگریشن گائیڈ

XMC1201T038F0200ABXUMA1 (exposed pad پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

XMC1201T038F0200ABXUMA1 کے لیے exposed pad پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XMC1201T038F0200ABXUMA1.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

XMC1201T038F0200ABXUMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Controller, Building Automation Module, Appliance Control Board, Motor and Relay Control, Battery-Powered Monitoring Node, Industrial Communication Peripheral.

🏭

Industrial Sensor Controller

The XMC1201T038F0200ABXUMA1 fits compact industrial sensor controllers because its 12-bit ADC can digitize process and analog inputs while 34 I/O lines support digital sensors, alarms, and actuator outputs. The 32 MHz Cortex-M0 core provides deterministic timing for filtering, calibration, and control logic, and 200 KB of Flash leaves useful capacity for firmware and configuration tables. Operation from 1.8 V to 5.5 V simplifies compatibility with industrial signal-conditioning boards. For an existing controller, preserve the PG-TSSOP-38-9 footprint and verify the exposed-pad connection in the manufacturer package drawing.

🧩

Building Automation Module

The XMC1201T038F0200ABXUMA1 suits building-automation modules that coordinate digital inputs, relays, communication interfaces, and periodic sensor updates. Its 34 I/O lines reduce external logic when the module handles several room or equipment-control channels, while 16 KB of SRAM supports temporary telemetry and protocol buffers. The 32 MHz Cortex-M0 core can service interrupts and scheduled control tasks without a complex operating system. The 1.8 V to 5.5 V supply range supports integration with common low-voltage power trees, although the obsolete lifecycle status makes the device more appropriate for maintained equipment than new broad deployments.

🔧

Appliance Control Board

For appliance control boards, the XMC1201T038F0200ABXUMA1 combines a 32 MHz control core with 200 KB of program memory, 16 KB of RAM, and 34 I/O lines for switches, sensors, indicators, and motor-control interlocks. The 12-bit ADC can monitor analog feedback such as temperature or supply conditions, while the embedded Flash supports self-test routines and product configuration. Its broad 1.8 V to 5.5 V operating range accommodates multiple internal rails. Engineers maintaining an existing appliance platform should validate timing, brownout behavior, peripheral mapping, and exposed-pad thermal performance before reusing the device in another design.

⚡

Motor and Relay Control

The XMC1201T038F0200ABXUMA1 can serve as the timing and logic controller in relay panels, small motor controllers, and electromechanical test equipment. Its 32 MHz Cortex-M0 core supports rapid event handling, the 34 I/O lines can distribute control and status signals, and the 12-bit ADC can supervise analog feedback. Its 16 KB of SRAM is sufficient for compact state machines and short control buffers, while 200 KB of Flash supports structured application code. Suitable design practice includes separating noisy motor or relay returns from sensitive analog paths and confirming the maximum pin-transition and operating-temperature requirements in the manufacturer documentation.

📱

Battery-Powered Monitoring Node

The XMC1201T038F0200ABXUMA1 fits low-duty-cycle monitoring nodes where 200 KB of embedded Flash and 16 KB of SRAM are more valuable than a high-end processor. The Cortex-M0 architecture can sleep between periodic measurements, wake to sample the 12-bit ADC, and transmit status through available serial peripherals. Operating down to 1.8 V helps accommodate regulated or battery-derived rails, while 34 I/O lines support sensors and local indicators. Power budget calculations should include sensor current, regulator quiescent behavior, and wake-up intervals rather than CPU frequency alone. Confirm retention, reset, and low-power mode requirements for the exact device revision during maintenance work.

🌐

Industrial Communication Peripheral

The XMC1201T038F0200ABXUMA1 can implement a compact protocol bridge or communication peripheral when a system needs deterministic 32 MHz processing, embedded Flash, and numerous digital interfaces. Its 34 I/O lines support UART, SPI, timer, or other peripheral signals where those functions are available in the selected device configuration, while 16 KB of SRAM accommodates short frame buffers. The 1.8 V to 5.5 V range supports interface-level integration with suitable level shifting or level-compatible peripherals. Designers should allocate pin multiplexing early, keep high-speed return currents compact, and follow the manufacturer decoupling recommendations to prevent communication errors during repetitive packet processing.

What is the XMC1201T038F0200ABXUMA1?
The XMC1201T038F0200ABXUMA1 is an Infineon XMC1200-series 32-bit microcontroller based on the ARM Cortex-M0 core. According to the Infineon product page, it operates at 32 MHz, includes 200 KB of Flash and 16 KB of SRAM, and is packaged in PG-TSSOP-38-9. It is intended for industrial embedded-control, sensing, communications, and low-voltage automation applications.
What is the operating voltage of XMC1201T038F0200ABXUMA1?
The XMC1201T038F0200ABXUMA1 operates from 1.8 V to 5.5 V. The manufacturer datasheet listing identifies this range for the device, while the Infineon ordering page describes the XMC1201-T038F0200-AB as an industrial Cortex-M0 microcontroller. This supply range allows use with common low-voltage rails in embedded systems, industrial controls, sensor nodes, and connected equipment.
What is the maximum clock frequency of XMC1201T038F0200ABXUMA1?
The maximum CPU clock frequency of the XMC1201T038F0200ABXUMA1 is 32 MHz. The Infineon product page identifies a 32 MHz CPU within the XMC1000 family, and the manufacturer datasheet listing confirms the 32 MHz operating frequency. This rate supports responsive event handling and real-time control alongside the integrated analog and digital peripherals.
How much Flash and SRAM does XMC1201T038F0200ABXUMA1 have?
The XMC1201T038F0200ABXUMA1 provides 200 KB of Flash memory and 16 KB of SRAM. The Infineon ordering page specifies 200 KB of Flash and 16 KB of SRAM, while the DigiKey technical listing identifies the Flash organization as 200K x 8. These capacities support embedded firmware, configuration data, working variables, stacks, and buffered sensor or communications data.
Where can I download the XMC1201T038F0200ABXUMA1 datasheet PDF?
The XMC1201T038F0200ABXUMA1 datasheet and package information can be obtained from the linked Infineon manufacturer resources on this page. The official package document identifies the PG-TSSOP-38-9 mechanical drawing, while the Infineon product page provides ordering and parameter information. Use the pin-description table and recommended circuit in those documents before assigning PCB nets.
Where is the XMC1201T038F0200ABXUMA1 pinout?
The XMC1201T038F0200ABXUMA1 pinout is documented in the manufacturer package drawing for PG-TSSOP-38-9 and the device datasheet. The official drawing linked on this page provides the physical terminal arrangement and dimensions. Cross-check the exposed pad, power pins, ground connections, and analog inputs against the pin-description table before laying out a PCB.
Is the XMC1201T038F0200ABXUMA1 still active?
The XMC1201T038F0200ABXUMA1 is marked obsolete in the manufacturer-linked distributor lifecycle information. Its technical identity remains well documented as a 32 MHz Cortex-M0 MCU with 200 KB of Flash, 16 KB of SRAM, and 34 I/O lines. For a new design, select a currently supported MCU after confirming pin, memory, analog, and software compatibility.
What is the best drop-in replacement for XMC1201T038F0200ABXUMA1?
The manufacturer base ordering designation XMC1201-T038F0200-AB identifies the same Infineon XMC1201-T038F0200-AB device configuration and is the closest documented drop-in ordering option. It retains the 32 MHz Cortex-M0 core, 200 KB of Flash, 16 KB of SRAM, and PG-TSSOP-38-9 implementation. Confirm the complete ordering suffix, pinout, exposed-pad connection, and firmware requirements before substitution.
Can XMC1201-T038F0200-AB replace XMC1201T038F0200ABXUMA1?
The XMC1201-T038F0200-AB can serve as the manufacturer base ordering designation for the XMC1201T038F0200ABXUMA1 configuration, with the same 32 MHz Cortex-M0 core, 200 KB of Flash, 16 KB of SRAM, and PG-TSSOP-38-9 package. The full commercial ordering code must match all electrical, temperature, packing, and lifecycle requirements before procurement or PCB release.
XMC1201T038F0200ABXUMA1 vs XMC1201-T038F0200-AB: which should I select?
The two identifiers describe the same Infineon device configuration when the complete ordering information is reconciled: 32 MHz Cortex-M0, 200 KB of Flash, 16 KB of SRAM, and PG-TSSOP-38-9. The hyphenated designation is the manufacturer base ordering code, while XMC1201T038F0200ABXUMA1 is the extended ordering MPN. Compare every suffix before treating them as procurement-identical.
When should I choose XMC1201T038F0200ABXUMA1?
Choose the XMC1201T038F0200ABXUMA1 when a compact design requires a 32 MHz Cortex-M0 MCU, 200 KB of embedded Flash, 16 KB of SRAM, a 12-bit ADC, and 34 I/O lines in PG-TSSOP-38-9. It fits industrial sensing and control systems operating from 1.8 V to 5.5 V. Because the device is obsolete, use it primarily for existing-product maintenance or controlled legacy replication.
Is XMC1201T038F0200ABXUMA1 suitable for industrial control applications?
The XMC1201T038F0200ABXUMA1 is suitable for industrial control applications because Infineon classifies the device as industrial and specifies operation from -40°C to 85°C. Its 32 MHz Cortex-M0 core, 34 I/O lines, 12-bit ADC, 200 KB of Flash, and 16 KB of SRAM cover typical sensing, timing, communications, and actuator-control requirements.
What are the key specifications engineers should know about XMC1201T038F0200ABXUMA1?
The key specifications are a 32 MHz ARM Cortex-M0 core, 200 KB of Flash, 16 KB of SRAM, 34 I/O lines, and a 12-bit integrated ADC. The device operates from 1.8 V to 5.5 V over -40°C to 85°C in a PG-TSSOP-38-9 surface-mount package. These figures position it as a compact, industrial, low-voltage embedded controller.
What can replace XMC1201T038F0200ABXUMA1?
The closest documented replacement is Infineon's XMC1201-T038F0200-AB base ordering designation, which identifies the same 32 MHz Cortex-M0 configuration with 200 KB of Flash, 16 KB of SRAM, and a PG-TSSOP-38-9 package. No other pin-compatible drop-in was established. A different microcontroller family may require firmware, peripheral, pinout, and PCB changes rather than serving as a drop-in substitute.
Where can I request a quote and current availability for XMC1201T038F0200ABXUMA1?
Current sourcing for the obsolete XMC1201T038F0200ABXUMA1 should be handled through the Request a Quote form on this page. Provide the exact MPN, required quantity, target package, and any acceptable lifecycle or traceability conditions. Availability and lead time for legacy devices can vary by lot, so obtain written confirmation before committing the component to production.

کے لیے انجینئرنگ ریفرنس ڈیٹا XMC1201T038F0200ABXUMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Select the XMC1201T038F0200ABXUMA1 for maintenance of an existing PG-TSSOP-38-9 design that requires a 32 MHz ARM Cortex-M0 core, 200 KB of Flash, 16 KB of SRAM, 34 I/O lines, and a 12-bit ADC. The Infineon XMC1201-T038F0200-AB base ordering designation is the closest documented drop-in alternative because it represents the same electrical and package configuration. Neither option should be treated as an interchangeable cross-brand substitute without a formal pin, memory-map, peripheral, and firmware review. For new development, begin with a currently supported MCU because this device is obsolete; migrate only after checking package geometry, exposed-pad requirements, supply range, ADC behavior, timer mapping, communications peripherals, boot configuration, and software dependencies.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ XMC1201-T038F0200-AB
Package PG-TSSOP-38-9 PG-TSSOP-38-9
Brand Infineon Technologies Infineon Technologies
Processor Core ARM Cortex-M0 ARM Cortex-M0
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 200 KB 200 KB
SRAM 16 KB 16 KB
Operating Supply Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V
Operating Temperature Range -40°C to 85°C -40°C to 85°C
ADC Resolution 12 bit 12 bit
General-Purpose I/O Lines 34 34

اہم امتیازی خصوصیات

  • Integrated memory and analog control in a 38-pin package (بمقابلہXMC1201-T038F0200-AB)
  • 32 MHz Cortex-M0 processing with 34 I/O lines (بمقابلہXMC1201-T038F0200-AB)
  • Wide low-voltage operating range (بمقابلہXMC1201-T038F0200-AB)

ڈیزائن نوٹس

Use the official PG-TSSOP-38-9 package drawing to establish the land pattern, terminal numbering, and exposed-pad geometry. Preserve the exposed-pad thermal and electrical requirements shown in the manufacturer documents. Place the device-side input, output, and decoupling capacitors close to their associated pins, and route the exposed-pad connection beneath the package before finalizing the assembly drawing.

Separate analog-sensing routes from digital control and communication paths to reduce conversion errors and switching noise. Connect the ground system and decoupling network using short paths, with the analog ground reference established according to the recommended application circuit. If the board includes relays, motor drivers, or other high-current loads, keep their return currents away from the MCU and ADC routing.

Design the supply network for operation across the full 1.8 V to 5.5 V device range. Verify startup, brownout, reset, and power-sequencing behavior at both voltage extremes, and account for local rail impedance when the MCU drives peripherals. The recommended circuit and decoupling values should be taken from the manufacturer datasheet rather than copied from a generic MCU layout.

Do not treat the obsolete lifecycle status as a reason to change the MCU pinout or peripheral assignment in an existing PCB. Preserve the complete ordering identity, exposed-pad connection, flash configuration, clock setup, and boot behavior. When changing the MCU, use the pin-description table and memory-map documentation to verify that an apparently identical package does not hide a different peripheral or power-pin arrangement.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is identified as an industrial MCU rather than an AEC-Q100 automotive device. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

XMC1201T038F0200ABXUMA1 XMC1201T038F0200ABXUMA1 datasheet XMC1201T038F0200ABXUMA1 pinout XMC1201T038F0200ABXUMA1 datasheet pdf Infineon XMC1201T038F0200ABXUMA1 XMC1201T038F0200ABXUMA1 equivalent XMC1201T038F0200ABXUMA1 replacement XMC1201T038F0200ABXUMA1 cross reference XMC1201T038F0200ABXUMA1 price XMC1201T038F0200ABXUMA1 stock XMC1201T038F0200ABXUMA1 PG-TSSOP-38-9 XMC1201T038F0200ABXUMA1 32MHz Cortex-M0 XMC1201-T038F0200-AB vs XMC1201T038F0200ABXUMA1 XMC1201T038F0200ABXUMA1 industrial controller XMC1201T038F0200ABXUMA1 schematic

متعلقہ اجزاء اور اصطلاحات

Infineon Technologies XMC1201T038F0200ABXUMA1 XMC1201-T038F0200-AB XMC1200 series XMC1000 family ARM Cortex-M0 32-bit RISC microcontroller industrial microcontroller embedded microcontroller integrated circuit semiconductor PG-TSSOP-38-9 TSSOP family surface-mount package 200 KB Flash memory 16 KB SRAM 12-bit ADC 34 I/O lines 32 MHz clock 1.8 V to 5.5 V supply industrial temperature range JEDEC RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں