XMC1201T038F0200ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
부품 번호: XMC1201T038F0200ABXUMA1 ✗ 단종XMC1201T038F0200ABXUMA1 개요
An industrial microcontroller is a semiconductor device that combines a programmable processor core, embedded nonvolatile memory, data memory, and peripherals on one integrated circuit. The Infineon XMC1200 series belongs to the XMC1000 microcontroller family and uses the ARM Cortex-M0 processor core within the hierarchy of 32-bit MCU, embedded microcontroller, and integrated semiconductor. This architecture combines deterministic control, efficient event-based operation, and compact code execution without requiring an external memory bus.
The XMC1201T038F0200ABXUMA1 provides 200 KB of Flash for firmware and 16 KB of SRAM for working data and stack requirements. Its integrated ADC has 12-bit resolution, while 34 I/O lines support digital inputs, outputs, timers, communications, and control functions. The device is specified for an industrial temperature range of -40°C to 85°C and a supply-voltage range of 1.8 V to 5.5 V.
The 32 MHz Cortex-M0 core provides a practical balance of processing throughput, power efficiency, and software simplicity for cost-sensitive embedded systems. Peripheral partitioning allows real-time control tasks to coexist with communications and analog measurement. Its 12-bit ADC is suitable for monitoring sensors and process variables where greater resolution is unnecessary, while the 34 available I/O lines reduce the need for external I/O expansion in compact designs.
Typical applications include industrial sensor controllers, building automation modules, appliance control boards, motor and relay-control systems, battery-powered monitoring equipment, and compact communication peripherals. The XMC1201 family is particularly useful when a design needs deterministic control from a 1.8 V to 5.5 V supply while retaining embedded Flash and a moderate number of general-purpose I/O pins.
PCB planning should account for the 38-terminal PG-TSSOP-38-9 land pattern, exposed thermal-pad requirements, and the pin-assignment table in the manufacturer package drawing. Decoupling and analog-ground layout should follow the recommended application circuit, while exposed-pad copper improves thermal performance without introducing high-frequency switching noise into sensitive measurements.
This product resource combines the Infineon ordering information, memory and analog specifications, package details, lifecycle status, drop-in alternatives, comparison parameters, and practical implementation guidance to support component selection and PCB design for XMC1200-series industrial control systems.
드롭인 대체품: XMC1201T038F0200ABXUMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XMC1201-T038F0200-AB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC1201T038F0200ABXUMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 200 KB |
| Flash Organization | 200K x 8 |
| SRAM | 16 KB |
| Operating Supply Voltage Range | 1.8 V to 5.5 V |
| 동작 온도 범위 | -40°C to 85°C |
| ADC Resolution | 12 bit |
| General-Purpose I/O Lines | 34 |
| Integrated ADC | Yes |
| 패키지 | PG-TSSOP-38-9 |
| Terminal Count | 38 terminals |
| 실장 유형 | Surface mount |
| Product Series | XMC1200 series |
| Product Family | XMC1000 family |
| Qualification Segment | Industrial |
| RoHS 상태 | Details available from manufacturer |
| Package Thermal Pad | Exposed pad |
| 수명 주기 상태 | Obsolete |
XMC1201T038F0200ABXUMA1 exposed pad 핀 구성 가이드
XMC1201T038F0200ABXUMA1(exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC1201T038F0200ABXUMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC1201T038F0200ABXUMA1 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, Building Automation Module, Appliance Control Board, Motor and Relay Control, Battery-Powered Monitoring Node, Industrial Communication Peripheral.
Industrial Sensor Controller
The XMC1201T038F0200ABXUMA1 fits compact industrial sensor controllers because its 12-bit ADC can digitize process and analog inputs while 34 I/O lines support digital sensors, alarms, and actuator outputs. The 32 MHz Cortex-M0 core provides deterministic timing for filtering, calibration, and control logic, and 200 KB of Flash leaves useful capacity for firmware and configuration tables. Operation from 1.8 V to 5.5 V simplifies compatibility with industrial signal-conditioning boards. For an existing controller, preserve the PG-TSSOP-38-9 footprint and verify the exposed-pad connection in the manufacturer package drawing.
추천
Building Automation Module
The XMC1201T038F0200ABXUMA1 suits building-automation modules that coordinate digital inputs, relays, communication interfaces, and periodic sensor updates. Its 34 I/O lines reduce external logic when the module handles several room or equipment-control channels, while 16 KB of SRAM supports temporary telemetry and protocol buffers. The 32 MHz Cortex-M0 core can service interrupts and scheduled control tasks without a complex operating system. The 1.8 V to 5.5 V supply range supports integration with common low-voltage power trees, although the obsolete lifecycle status makes the device more appropriate for maintained equipment than new broad deployments.
추천
Appliance Control Board
For appliance control boards, the XMC1201T038F0200ABXUMA1 combines a 32 MHz control core with 200 KB of program memory, 16 KB of RAM, and 34 I/O lines for switches, sensors, indicators, and motor-control interlocks. The 12-bit ADC can monitor analog feedback such as temperature or supply conditions, while the embedded Flash supports self-test routines and product configuration. Its broad 1.8 V to 5.5 V operating range accommodates multiple internal rails. Engineers maintaining an existing appliance platform should validate timing, brownout behavior, peripheral mapping, and exposed-pad thermal performance before reusing the device in another design.
추천
Motor and Relay Control
The XMC1201T038F0200ABXUMA1 can serve as the timing and logic controller in relay panels, small motor controllers, and electromechanical test equipment. Its 32 MHz Cortex-M0 core supports rapid event handling, the 34 I/O lines can distribute control and status signals, and the 12-bit ADC can supervise analog feedback. Its 16 KB of SRAM is sufficient for compact state machines and short control buffers, while 200 KB of Flash supports structured application code. Suitable design practice includes separating noisy motor or relay returns from sensitive analog paths and confirming the maximum pin-transition and operating-temperature requirements in the manufacturer documentation.
추천
Battery-Powered Monitoring Node
The XMC1201T038F0200ABXUMA1 fits low-duty-cycle monitoring nodes where 200 KB of embedded Flash and 16 KB of SRAM are more valuable than a high-end processor. The Cortex-M0 architecture can sleep between periodic measurements, wake to sample the 12-bit ADC, and transmit status through available serial peripherals. Operating down to 1.8 V helps accommodate regulated or battery-derived rails, while 34 I/O lines support sensors and local indicators. Power budget calculations should include sensor current, regulator quiescent behavior, and wake-up intervals rather than CPU frequency alone. Confirm retention, reset, and low-power mode requirements for the exact device revision during maintenance work.
추천
Industrial Communication Peripheral
The XMC1201T038F0200ABXUMA1 can implement a compact protocol bridge or communication peripheral when a system needs deterministic 32 MHz processing, embedded Flash, and numerous digital interfaces. Its 34 I/O lines support UART, SPI, timer, or other peripheral signals where those functions are available in the selected device configuration, while 16 KB of SRAM accommodates short frame buffers. The 1.8 V to 5.5 V range supports interface-level integration with suitable level shifting or level-compatible peripherals. Designers should allocate pin multiplexing early, keep high-speed return currents compact, and follow the manufacturer decoupling recommendations to prevent communication errors during repetitive packet processing.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC1201T038F0200ABXUMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC1201-T038F0200-AB |
|---|---|---|
| Package | PG-TSSOP-38-9 | PG-TSSOP-38-9 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 200 KB | 200 KB |
| SRAM | 16 KB | 16 KB |
| Operating Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Operating Temperature Range | -40°C to 85°C | -40°C to 85°C |
| ADC Resolution | 12 bit | 12 bit |
| General-Purpose I/O Lines | 34 | 34 |
주요 차별점
- Integrated memory and analog control in a 38-pin package (vs XMC1201-T038F0200-AB)
- 32 MHz Cortex-M0 processing with 34 I/O lines (vs XMC1201-T038F0200-AB)
- Wide low-voltage operating range (vs XMC1201-T038F0200-AB)
설계 노트
Use the official PG-TSSOP-38-9 package drawing to establish the land pattern, terminal numbering, and exposed-pad geometry. Preserve the exposed-pad thermal and electrical requirements shown in the manufacturer documents. Place the device-side input, output, and decoupling capacitors close to their associated pins, and route the exposed-pad connection beneath the package before finalizing the assembly drawing.
Separate analog-sensing routes from digital control and communication paths to reduce conversion errors and switching noise. Connect the ground system and decoupling network using short paths, with the analog ground reference established according to the recommended application circuit. If the board includes relays, motor drivers, or other high-current loads, keep their return currents away from the MCU and ADC routing.
Design the supply network for operation across the full 1.8 V to 5.5 V device range. Verify startup, brownout, reset, and power-sequencing behavior at both voltage extremes, and account for local rail impedance when the MCU drives peripherals. The recommended circuit and decoupling values should be taken from the manufacturer datasheet rather than copied from a generic MCU layout.
Do not treat the obsolete lifecycle status as a reason to change the MCU pinout or peripheral assignment in an existing PCB. Preserve the complete ordering identity, exposed-pad connection, flash configuration, clock setup, and boot behavior. When changing the MCU, use the pin-description table and memory-map documentation to verify that an apparently identical package does not hide a different peripheral or power-pin arrangement.
규정 준수 정보
The device is identified as an industrial MCU rather than an AEC-Q100 automotive device. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.