XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F100K512BAXQMA1 ✓ فعالXMC4400F100K512BAXQMA1 جائزہ
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7E-M architecture. It combines a real-time processing core with timers, communication peripherals, memory interfaces, and GPIO in one integrated circuit. Within the product hierarchy, the XMC4400 is a microcontroller, embedded processor, and semiconductor designed for industrial control systems where deterministic peripherals and network connectivity are more important than general-purpose computing performance.
Principal features include 120 MHz processing, 512 kB of flash memory, 10/100 Ethernet MAC capability, and a high-resolution PWM unit with 150 ps resolution. The fine PWM resolution is especially useful in digital power conversion, where precise duty-cycle control can improve regulation behavior and reduce harmonic distortion. The integrated communication and timing resources also reduce the need for external interface components in industrial Ethernet and automation equipment.
The XMC4000 peripheral set includes dedicated digital power conversion resources and multiple high-speed timer inputs. This combination allows the microcontroller to control switched-mode power stages while managing communications and supervisory functions. The 100-pin LQFP package exposes substantially more I/O than smaller MCU packages, allowing dedicated signals for power-control loops, communications, diagnostics, and machine interfaces while preserving an exposed thermal pad for heat spreading.
Typical applications include industrial Ethernet controllers, programmable logic controllers, digital power supplies, motor-control and inverter equipment, factory automation nodes, industrial communication gateways, and embedded data-acquisition systems. The 10/100 Ethernet capability is particularly suitable for legacy industrial networks, while the 150 ps PWM resolution supports high-resolution power-conversion control.
PCB design should prioritize a low-impedance ground plane, careful routing of power-stage signals, and effective decoupling around the 3.3 V supply pins. The exposed pad must be connected to the appropriate ground-plane area according to the manufacturer’s land-pattern guidance. Ethernet traces require controlled topology and return-path continuity to minimize reflections and susceptibility to common-mode noise.
This product page combines manufacturer specifications with practical design guidance, packaging information, and pin-compatible alternatives for engineering evaluation. It helps designers assess whether the 120 MHz Cortex-M4 core, 512 kB flash, 10/100 Ethernet support, 150 ps PWM resolution, and PG-LQFP-100 footprint fit an industrial control or digital power-conversion design before committing the exact ordering code to a BOM.
کے لیے ڈراپ اِن متبادل XMC4400F100K512BAXQMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XMC4400F100K512BAXQMA1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Flash Organization, Package, Product Type.
XMC4400F100K512ABXQMA1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4400F100F512BAXQMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4400F100K256BAXQMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4400F100K128BAXQMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4400-F100K512-BA
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4400F100K512BAXQMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Series | XMC4000 |
| CPU Core | Arm Cortex-M4 |
| Bit Width | 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Embedded Flash Memory | 512 kB |
| Flash Organization | 512K x 8 bit |
| سپلائی وولٹیج | 3.3 V |
| Ethernet Support | 10/100 Ethernet MAC |
| High-Resolution PWM Resolution | 150 ps |
| پیکیج | PG-LQFP-100 |
| Package Pin Count | 100 pins |
| Exposed Pad | Yes |
| Temperature Grade Designator | -25 |
| Application Class | Industrial |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Shipping Format | Tray |
XMC4400F100K512BAXQMA1 100 pins پن کنفیگریشن گائیڈ
XMC4400F100K512BAXQMA1 (100 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XMC4400F100K512BAXQMA1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XMC4400F100K512BAXQMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Control Node, Digital Power Converter, Industrial Motor Controller, PLC and Factory Automation Module, Industrial Communication Gateway, Embedded Data Acquisition System.
Industrial Ethernet Control Node
The XMC4400F100K512BAXQMA1 fits industrial Ethernet nodes that combine protocol handling with real-time control. Its 120 MHz Arm Cortex-M4 core provides execution capacity for network tasks and supervisory logic, while the integrated 10/100 Ethernet MAC supports communication with industrial equipment. The 512 kB flash supplies room for networking, diagnostics, and application firmware. Place the MCU close to the Ethernet magnetics and provide controlled return paths for differential pairs. Firmware should separate network servicing from control-loop scheduling to protect deterministic behavior.
تجویز کردہ
Digital Power Converter
The XMC4400F100K512BAXQMA1 is suitable for digitally controlled power converters where switching timing and control resolution are central. Its high-resolution PWM unit operates at 150 ps resolution, enabling precise duty-cycle generation for converter feedback loops. The 120 MHz Cortex-M4 core can execute current and voltage control algorithms, while 512 kB flash accommodates control code, calibration data, and fault handling. Keep power-stage feedback traces short, isolate them from Ethernet clocks, and validate timing against the worst-case control-loop latency.
تجویز کردہ
Industrial Motor Controller
The XMC4400F100K512BAXQMA1 can control industrial motor systems that require deterministic PWM generation, networking, and embedded control logic. The 150 ps PWM resolution supports fine switching and modulation control, while the 120 MHz Cortex-M4 core supports current-loop computation, fault management, and communications. The 100-pin package provides a practical number of I/O for encoder, gate-driver, and digital interfaces. Separate analog and digital return paths, place gate-driver traces away from Ethernet routing, and include hardware shutdown paths that do not depend on firmware.
تجویز کردہ
PLC and Factory Automation Module
The XMC4400F100K512BAXQMA1 fits compact PLC and factory-automation modules that combine real-time I/O with industrial communications. Its 120 MHz Cortex-M4 core supports protocol stacks and control tasks, the 512 kB flash provides substantial firmware capacity, and 10/100 Ethernet MAC capability supports connection to legacy industrial networks. The large 100-pin package simplifies access to field-bus, digital I/O, and analog-interface signals. Firmware should use deterministic scheduling, and the PCB should provide isolated communications boundaries where the factory network introduces surge or ground-potential hazards.
تجویز کردہ
Industrial Communication Gateway
The XMC4400F100K512BAXQMA1 is appropriate for gateways that translate industrial Ethernet traffic while performing local protocol conversion or supervisory functions. Its 10/100 Ethernet MAC supports network attachment, while the Cortex-M4 processing capability and 512 kB flash accommodate multiple protocol handlers, diagnostics, and configuration storage. The LQFP-100 package offers sufficient I/O for status indicators, service interfaces, and serial expansion. Maintain continuous ground references beneath high-speed pairs and avoid routing gateway clock and power-converter signals through Ethernet regions.
تجویز کردہ
Embedded Data Acquisition System
The XMC4400F100K512BAXQMA1 supports embedded data-acquisition equipment that combines sensor conditioning, local processing, and Ethernet reporting. Its 120 MHz Cortex-M4 core can handle sampling control and protocol processing, while 512 kB flash provides room for buffering, configuration, and communication firmware. The 10/100 Ethernet MAC enables efficient transfer of acquired data to supervisory systems. Use short, shielded analog routes, define a single quiet ground reference for sensitive sections, and validate analog performance independently from Ethernet activity to prevent switching and packet-related interference.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XMC4400F100K512BAXQMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XMC4400F100K512ABXQMA1 | XMC4400F100F512BAXQMA1 | XMC4400F100K256BAXQMA1 | XMC4400F100K128BAXQMA1 | XMC4400-F100K512-BA |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
اہم امتیازی خصوصیات
- Higher flash capacity than reduced-memory XMC4000 alternatives (بمقابلہXMC4400F100K128BAXQMA1)
- Substantially more code and configuration storage than the 256 kB derivative (بمقابلہXMC4400F100K256BAXQMA1)
- Identified closest ordering-code candidate (بمقابلہXMC4400F100K512ABXQMA1)
- Full manufacturer ordering designation for the specified configuration (بمقابلہXMC4400-F100K512-BA)
ڈیزائن نوٹس
Use the manufacturer’s PG-LQFP-100 land pattern and exposed-pad geometry exactly. Connect the exposed pad to the ground plane through the prescribed thermal-via arrangement, maintaining short and symmetric return paths for every supply connection. Place input and bulk-decoupling capacitors close to their associated pins. Confirm clearances for the 3.3 V rail and all external interface signals against the final industrial-board insulation requirements.
Route 10/100 Ethernet differential pairs as a controlled-impedance, tightly coupled pair with a continuous reference plane. Avoid plane splits, test-point stubs, and right-angle routing beneath the pair. Respect the receive and transmit pair geometry specified for the selected Ethernet PHY and magnetics. Add common-mode filtering close to the connector while following the magnetics and PHY vendor guidance on component placement.
Separate the digital control section from analog sensing and power-converter routing. Place the MCU, decouplers, and support components before sensitive feedback networks, and route high-current switching paths away from the 150 ps PWM and Ethernet signals. Maintain a coherent ground strategy with low-impedance connections between the exposed pad, supply return, and analog reference. Avoid using the exposed pad as a general-purpose signal route.
Do not substitute a lower-flash XMC4000 derivative without checking linker output, bootloader assumptions, calibration tables, and protocol stacks. The 256 kB option has 256 kB less flash than the target, while the 128 kB option has 384 kB less. Firmware development should also avoid depending on a particular BA, AB, F, or K ordering-code interpretation until the final manufacturer ordering designation has been confirmed.
تعمیل کی معلومات
The device is identified by Infineon as an industrial microcontroller. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the exact ordering documentation.
