XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
부품 번호: XMC4400F100K512BAXQMA1 ✓ 활성XMC4400F100K512BAXQMA1 개요
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7E-M architecture. It combines a real-time processing core with timers, communication peripherals, memory interfaces, and GPIO in one integrated circuit. Within the product hierarchy, the XMC4400 is a microcontroller, embedded processor, and semiconductor designed for industrial control systems where deterministic peripherals and network connectivity are more important than general-purpose computing performance.
Principal features include 120 MHz processing, 512 kB of flash memory, 10/100 Ethernet MAC capability, and a high-resolution PWM unit with 150 ps resolution. The fine PWM resolution is especially useful in digital power conversion, where precise duty-cycle control can improve regulation behavior and reduce harmonic distortion. The integrated communication and timing resources also reduce the need for external interface components in industrial Ethernet and automation equipment.
The XMC4000 peripheral set includes dedicated digital power conversion resources and multiple high-speed timer inputs. This combination allows the microcontroller to control switched-mode power stages while managing communications and supervisory functions. The 100-pin LQFP package exposes substantially more I/O than smaller MCU packages, allowing dedicated signals for power-control loops, communications, diagnostics, and machine interfaces while preserving an exposed thermal pad for heat spreading.
Typical applications include industrial Ethernet controllers, programmable logic controllers, digital power supplies, motor-control and inverter equipment, factory automation nodes, industrial communication gateways, and embedded data-acquisition systems. The 10/100 Ethernet capability is particularly suitable for legacy industrial networks, while the 150 ps PWM resolution supports high-resolution power-conversion control.
PCB design should prioritize a low-impedance ground plane, careful routing of power-stage signals, and effective decoupling around the 3.3 V supply pins. The exposed pad must be connected to the appropriate ground-plane area according to the manufacturer’s land-pattern guidance. Ethernet traces require controlled topology and return-path continuity to minimize reflections and susceptibility to common-mode noise.
This product page combines manufacturer specifications with practical design guidance, packaging information, and pin-compatible alternatives for engineering evaluation. It helps designers assess whether the 120 MHz Cortex-M4 core, 512 kB flash, 10/100 Ethernet support, 150 ps PWM resolution, and PG-LQFP-100 footprint fit an industrial control or digital power-conversion design before committing the exact ordering code to a BOM.
드롭인 대체품: XMC4400F100K512BAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XMC4400F100K512BAXQMA1 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Organization, Package, Product Type.
XMC4400F100K512ABXQMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4400F100F512BAXQMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC4400F100K256BAXQMA1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XMC4400F100K128BAXQMA1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XMC4400-F100K512-BA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4400F100K512BAXQMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Series | XMC4000 |
| CPU Core | Arm Cortex-M4 |
| Bit Width | 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Embedded Flash Memory | 512 kB |
| Flash Organization | 512K x 8 bit |
| 공급 전압 | 3.3 V |
| Ethernet Support | 10/100 Ethernet MAC |
| High-Resolution PWM Resolution | 150 ps |
| 패키지 | PG-LQFP-100 |
| Package Pin Count | 100 pins |
| Exposed Pad | Yes |
| Temperature Grade Designator | -25 |
| Application Class | Industrial |
| 실장 유형 | Surface Mount |
| Shipping Format | Tray |
XMC4400F100K512BAXQMA1 100 pins 핀 구성 가이드
XMC4400F100K512BAXQMA1(100 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4400F100K512BAXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4400F100K512BAXQMA1 적합 용도: 6 애플리케이션s: Industrial Ethernet Control Node, Digital Power Converter, Industrial Motor Controller, PLC and Factory Automation Module, Industrial Communication Gateway, Embedded Data Acquisition System.
Industrial Ethernet Control Node
The XMC4400F100K512BAXQMA1 fits industrial Ethernet nodes that combine protocol handling with real-time control. Its 120 MHz Arm Cortex-M4 core provides execution capacity for network tasks and supervisory logic, while the integrated 10/100 Ethernet MAC supports communication with industrial equipment. The 512 kB flash supplies room for networking, diagnostics, and application firmware. Place the MCU close to the Ethernet magnetics and provide controlled return paths for differential pairs. Firmware should separate network servicing from control-loop scheduling to protect deterministic behavior.
추천
Digital Power Converter
The XMC4400F100K512BAXQMA1 is suitable for digitally controlled power converters where switching timing and control resolution are central. Its high-resolution PWM unit operates at 150 ps resolution, enabling precise duty-cycle generation for converter feedback loops. The 120 MHz Cortex-M4 core can execute current and voltage control algorithms, while 512 kB flash accommodates control code, calibration data, and fault handling. Keep power-stage feedback traces short, isolate them from Ethernet clocks, and validate timing against the worst-case control-loop latency.
추천
Industrial Motor Controller
The XMC4400F100K512BAXQMA1 can control industrial motor systems that require deterministic PWM generation, networking, and embedded control logic. The 150 ps PWM resolution supports fine switching and modulation control, while the 120 MHz Cortex-M4 core supports current-loop computation, fault management, and communications. The 100-pin package provides a practical number of I/O for encoder, gate-driver, and digital interfaces. Separate analog and digital return paths, place gate-driver traces away from Ethernet routing, and include hardware shutdown paths that do not depend on firmware.
추천
PLC and Factory Automation Module
The XMC4400F100K512BAXQMA1 fits compact PLC and factory-automation modules that combine real-time I/O with industrial communications. Its 120 MHz Cortex-M4 core supports protocol stacks and control tasks, the 512 kB flash provides substantial firmware capacity, and 10/100 Ethernet MAC capability supports connection to legacy industrial networks. The large 100-pin package simplifies access to field-bus, digital I/O, and analog-interface signals. Firmware should use deterministic scheduling, and the PCB should provide isolated communications boundaries where the factory network introduces surge or ground-potential hazards.
추천
Industrial Communication Gateway
The XMC4400F100K512BAXQMA1 is appropriate for gateways that translate industrial Ethernet traffic while performing local protocol conversion or supervisory functions. Its 10/100 Ethernet MAC supports network attachment, while the Cortex-M4 processing capability and 512 kB flash accommodate multiple protocol handlers, diagnostics, and configuration storage. The LQFP-100 package offers sufficient I/O for status indicators, service interfaces, and serial expansion. Maintain continuous ground references beneath high-speed pairs and avoid routing gateway clock and power-converter signals through Ethernet regions.
추천
Embedded Data Acquisition System
The XMC4400F100K512BAXQMA1 supports embedded data-acquisition equipment that combines sensor conditioning, local processing, and Ethernet reporting. Its 120 MHz Cortex-M4 core can handle sampling control and protocol processing, while 512 kB flash provides room for buffering, configuration, and communication firmware. The 10/100 Ethernet MAC enables efficient transfer of acquired data to supervisory systems. Use short, shielded analog routes, define a single quiet ground reference for sensitive sections, and validate analog performance independently from Ethernet activity to prevent switching and packet-related interference.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4400F100K512BAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4400F100K512ABXQMA1 | XMC4400F100F512BAXQMA1 | XMC4400F100K256BAXQMA1 | XMC4400F100K128BAXQMA1 | XMC4400-F100K512-BA |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
주요 차별점
- Higher flash capacity than reduced-memory XMC4000 alternatives (vs XMC4400F100K128BAXQMA1)
- Substantially more code and configuration storage than the 256 kB derivative (vs XMC4400F100K256BAXQMA1)
- Identified closest ordering-code candidate (vs XMC4400F100K512ABXQMA1)
- Full manufacturer ordering designation for the specified configuration (vs XMC4400-F100K512-BA)
설계 노트
Use the manufacturer’s PG-LQFP-100 land pattern and exposed-pad geometry exactly. Connect the exposed pad to the ground plane through the prescribed thermal-via arrangement, maintaining short and symmetric return paths for every supply connection. Place input and bulk-decoupling capacitors close to their associated pins. Confirm clearances for the 3.3 V rail and all external interface signals against the final industrial-board insulation requirements.
Route 10/100 Ethernet differential pairs as a controlled-impedance, tightly coupled pair with a continuous reference plane. Avoid plane splits, test-point stubs, and right-angle routing beneath the pair. Respect the receive and transmit pair geometry specified for the selected Ethernet PHY and magnetics. Add common-mode filtering close to the connector while following the magnetics and PHY vendor guidance on component placement.
Separate the digital control section from analog sensing and power-converter routing. Place the MCU, decouplers, and support components before sensitive feedback networks, and route high-current switching paths away from the 150 ps PWM and Ethernet signals. Maintain a coherent ground strategy with low-impedance connections between the exposed pad, supply return, and analog reference. Avoid using the exposed pad as a general-purpose signal route.
Do not substitute a lower-flash XMC4000 derivative without checking linker output, bootloader assumptions, calibration tables, and protocol stacks. The 256 kB option has 256 kB less flash than the target, while the 128 kB option has 384 kB less. Firmware development should also avoid depending on a particular BA, AB, F, or K ordering-code interpretation until the final manufacturer ordering designation has been confirmed.
규정 준수 정보
The device is identified by Infineon as an industrial microcontroller. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the exact ordering documentation.
