P2041NXE7MMC - QorIQ 4-Core 1.2GHz SoC, 780-FCBGA | NXP Semiconductors
MPN: P2041NXE7MMC ✗ Cuối đờiP2041NXE7MMC Tóm tắt
A QorIQ communications processor is a highly-integrated SoC designed for embedded networking and data-plane workloads, combining general-purpose CPU cores with hardware accelerators for packet processing, cryptography, and high-speed I/O. Within the broader taxonomy, the P2041 belongs to the PowerPC/Power Architecture family of microprocessors, falls within the communications processor segment, and bridges the gap between low-end single-core devices and high-end multicore CPUs such as the P4 family. It is software-compatible with P1, P3, P4, and P5 families, enabling design reuse across the QorIQ portfolio.
Key features include four Power Architecture e500mc cores at 1.2 GHz, dual DDR3/DDR3L controllers with 64-bit data width and ECC, three PCI Express Gen2 controllers, two SATA 2.0 ports, four Serial RapidIO (SRIO) ports, four 1 GbE controllers, one 10 Gigabit Ethernet (XAUI) MAC, an integrated security engine supporting DES, 3DES, AES, SHA, RSA, and ECC, and a 32-bit local bus. The device operates from a typical 1.0V core supply with separate voltage rails for the DDR I/O and SerDes blocks.
The SoC is implemented in 45 nm CMOS process technology and supports hypervisor-aware virtualization, advanced power management with dynamic frequency scaling, and extensive debugging via JTAG and run-control. The high level of integration reduces board complexity by eliminating the need for discrete packet processors, crypto accelerators, and memory controllers in many designs.
Typical applications include multiservice routers and gateways, LTE and WiMAX base stations, network-attached storage (NAS), industrial Ethernet switches, factory automation controllers, and defense/aerospace networking. The integrated security engine makes it especially well suited to IPsec VPN gateways and secure CPE devices. This part is in the EOL phase per the NXP product page; design teams should evaluate the listed alternatives for new designs.
When designing with the P2041NXE7MMC, pay close attention to power sequencing, DDR3L signal integrity (the SoC requires matched-length routing and 50 ohm controlled impedance), and SerDes reference clock quality. Adequate thermal relief is required because the FCBGA package can dissipate more than 10W under sustained multi-core load.
This page consolidates distributor pricing, verified drop-in QorIQ alternatives within the same 780-FCBGA footprint, and design considerations for industrial-temperature networking designs.
Bộ thay thế dễ dàng lắp đặt cho P2041NXE7MMC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với P2041NXE7MMC (cùng hình factor và footprint) — khác nhau ở Package, Ethernet, Memory Controller, Series, Core Architecture.
P2040NXE7MMC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
P2041NXE1MMB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P2041NSE1MMB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P2041NSE1NNB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P2041FE3NNC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
P2041NXE7MMC Tỷ lệ tối đa & tính chất điện
| Part Number | P2041NXE7MMC |
| Series | QorIQ P2 |
| Core Architecture | Power Architecture e500mc |
| Number of Cores | 4 |
| Core Frequency | 1.2 GHz |
| Bề rộng đường dữ liệu | 32-bit |
| Memory Controller | DDR3 / DDR3L with ECC |
| PCIe Controllers | 3 x PCIe Gen2 |
| SATA Ports | 2 x SATA 2.0 |
| Serial RapidIO Ports | 4 x SRIO |
| Ethernet | 4 x 1 GbE + 1 x 10 GbE (XAUI) |
| Security Engine | SEC (DES/3DES/AES/SHA/RSA/ECC) |
| Hộp | 780-FCBGA (23x23 mm) |
| Nhiệt độ hoạt động | -40C to +105C |
| Process Technology | 45 nm CMOS |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái vòng đời | End of Life |
| Đông trùng haogen | Compliant |
Hướng dẫn cấu hình chân P2041NXE7MMC 780-fcbga (23x23 mm)
Cấu hình chân cho P2041NXE7MMC (780-fcbga (23x23 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho P2041NXE7MMC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
P2041NXE7MMC phù hợp cho 6 Áp dụngs: Multiservice Routers and Gateways, Wireless Base Station Baseband, Network-Attached Storage (NAS) Controllers, Industrial Ethernet Switches, Defense and Aerospace Networking, Secure CPE / IPsec VPN Appliance.
Multiservice Routers and Gateways
The P2041NXE7MMC fits multiservice router and gateway designs because it integrates four 1.2 GHz e500mc cores for parallel packet processing, dual DDR3L controllers for high-bandwidth memory access, and three PCIe Gen2 lanes for connecting external Ethernet PHY and switch fabrics. The integrated SEC engine accelerates IPsec, SSL/TLS, and MACsec at line rate, eliminating the need for discrete crypto accelerators. Placed at the heart of a 1U/2U gateway chassis, it can handle hundreds of thousands of simultaneous IPSec tunnels. The XAUI 10 GbE MAC enables direct attachment to a 10G uplink without an external PHY bridge. Engineers should evaluate PCB thermal dissipation since the FCBGA can dissipate 8-12W under sustained multi-core encryption load; a 4-layer board with copper pours under the BGA is recommended.
Được đề xuất
Wireless Base Station Baseband
In LTE and WiMAX base-station baseband units, the P2041NXE7MMC's quad e500mc cores deliver the cycle budget required for PHY-layer processing, MAC scheduling, and backhaul encryption in a single device. The four SRIO ports provide deterministic low-latency connectivity to digital front-end (DFE) ASICs and DSP co-processors, while PCIe Gen2 links to CPRI or OBSAI fronthaul cards. The -40C to +105C industrial temperature grade supports outdoor cabinet deployments. With 10 GbE XAUI, the SoC can aggregate multiple sectors' traffic onto a single fiber uplink. Designers should use matched-length DDR3L routing (50 ohm controlled impedance) and follow NXP's reference design thermal profile for reliable operation above 25C ambient.
Được đề xuất
Network-Attached Storage (NAS) Controllers
The P2041NXE7MMC is well matched to NAS controller boards where its two SATA 2.0 ports drive multiple drives directly and the PCIe Gen2 lanes connect to a 10 GbE NIC or hardware RAID accelerator. The four e500mc cores handle SMB/NFS/iSCSI protocol stacks, file-system metadata operations, and software RAID5/6 computations. DDR3L with ECC provides reliable memory for in-flight write coalescing buffers. Hardware-assisted AES via the SEC engine allows line-rate encrypted backups. The same 780-FCBGA footprint shared with P2040 and P2041 speed grades enables BOM-flexible SKU management across entry-level and high-performance NAS products in the same chassis.
Được đề xuất
Industrial Ethernet Switches
For managed industrial Ethernet switches, the P2041NXE7MMC's -40C to +105C operating range, four 1 GbE MACs, and three PCIe Gen2 lanes provide the I/O flexibility required for ring-protocol switching, PTP/IEEE 1588 timestamping, and PRP/HSR redundancy. The SERDES block connects to external GbE PHYs or fiber transceivers, while PCIe attaches to line-rate ACL coprocessors for industrial firewalling. Hardware virtualization supports multiple containerized protocol stacks on a single SoC, reducing hardware SKU count. The four-core architecture allows deterministic CPU allocation across switching, routing, and management planes. Design teams should follow NXP's PCB design guide for FCBGA breakout and SerDes reference-clock routing to meet EMI/EMC industrial standards.
Được đề xuất
Defense and Aerospace Networking
Defense and aerospace networking platforms use the P2041NXE7MMC because of its extended temperature grade, hardware crypto engine for Type-1 encryption adjacency, and SRIO ports for low-latency inter-board communication in VPX/VME chassis. The Power Architecture e500mc core family has a long lifecycle and broad MIL-STD-810 support documentation. Four cores run independent ARINC 664, TTEthernet, or DDS protocol stacks for partitioned real-time traffic. The integrated security engine accelerates HAIPE, TLS, and MACsec flows. Designers must implement NXP's recommended thermal management since sealed enclosures often exceed 85C ambient; a thermal pad and heatsink are typical for flight-qualified chassis.
Được đề xuất
Secure CPE / IPsec VPN Appliance
The P2041NXE7MMC suits secure CPE and IPsec VPN appliances where the SEC engine performs AES-NI-equivalent throughput at line rate across multi-gigabit WAN links. Four e500mc cores at 1.2 GHz handle the control plane, routing daemon, firewall inspection, and management UI concurrently. XAUI 10 GbE connects to the WAN fiber uplink while PCIe Gen2 lanes attach to a multi-port GbE switch. DDR3L with ECC protects against soft errors in long-uptime deployments. The integrated crypto block supports IKEv2, IPsec ESP, and SSL inspection offload, reducing CPU load by up to 70 percent compared with software-only implementations. Engineers should budget adequate PCB copper area under the FCBGA to maintain junction temperature below 105C under sustained load.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho P2041NXE7MMC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | P2040NXE7MMC | P2041NXE1MMB | P2041NSE1MMB | P2041NSE1NNB | P2041FE3NNC |
|---|---|---|---|---|---|---|
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc |
| Core Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.0 GHz | 1.0 GHz | 1.5 GHz |
| Operating Temperature | -40C to +105C | -40C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C |
| Security Engine (SEC) | Yes | No | Yes | Yes (enabled) | Yes (enabled) | Yes |
| 10 GbE XAUI | Yes | No | Yes | Yes | Yes | Yes |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
| Estimated Unit Price (USD) | 95.00 | 85.00 | 92.00 | 98.00 | 95.00 | 120.00 |
Bảo phân biệt quan trọng
- Integrated SEC engine with hardware AES, RSA, and ECC acceleration (vsP2040NXE7MMC)
- 10 GbE XAUI MAC integration (vsP2040NXE7MMC)
- Extended temperature grade for industrial deployment (vsP2041NXE1MMB)
- Industrial-temperature 1.2 GHz performance bin (vsP2041NSE1MMB)
Ghi chú thiết kế
The 780-FCBGA package can dissipate 8-12W under sustained multi-core encryption load. At 1.2 GHz with all four cores active and SEC running AES, junction-to-ambient thermal resistance requires at least 4-layer PCB construction with a continuous ground/power copper pour directly under the BGA. For sealed enclosures exceeding 60C ambient, attach a heatsink with thermal interface material; a 6 mm aluminum extrusion is typical. Designers should follow NXP's AN3945 thermal management guide.
DDR3L signal integrity is the most common design failure mode. Route the DDR3L byte lanes with matched lengths within 25 mils of each other, maintain 50 ohm single-ended controlled impedance, and place the VTT termination resistors within 500 mils of the memory device. Use 4.7uF decoupling capacitors on each DDR power rail adjacent to the SoC. The SerDes reference clocks require a clean jitter source - use a dedicated low-jitter oscillator rather than deriving from the system clock.
Power sequencing must follow NXP's specified order: 1.0V core rail before DDR I/O rail before SerDes rail before 3.3V I/O. Reverse sequencing can latch the device. Do not enable the SEC engine in firmware unless the part variant has SEC enabled at manufacture (NS parts), or hardware exceptions will occur. When migrating between speed grades (1.0/1.2/1.5 GHz), re-validate boot ROM and DDR3L training parameters - they are frequency-dependent.
For 10 GbE XAUI, route the four SerDes lanes with 100 ohm differential impedance, length-matching within 5 mils, and keep total length under 4 inches to meet the XAUI specification. Place the XAUI PHY adjacent to the SoC with no vias on the differential pairs where practical. For PCIe Gen2, keep the maximum length to 5 inches and avoid splitting reference planes across the PCIe lanes.
Thông tin tuân thủ
Halogen-Free compliance confirmed per the verified distributor cross-reference data. RoHS, REACH, and conflict-minerals status were not explicitly stated in the provided data; consult NXP product compliance documentation directly for definitive statements. AEC-Q100 is not applicable because this is a communications processor, not an automotive-grade IC.
