ADS6144IRHB25 vs ADS6144IRHBR So sánh
So sánh chi tiết song song của ADS6144IRHB25 bằng Texas Instruments và ADS6144IRHBR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
ADS6144IRHB25 - 14-Bit 105MSPS Low-Power ADC | Texas Instruments
ADS6144IRHB25 ✓ Hoạt độngTexas Instruments
ADS6144IRHBR - 14-Bit 105MSPS Low-Power ADC | Texas Instruments
ADS6144IRHBR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | ADS6144IRHB25 | ADS6144IRHBR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | ADC/DAC | ADC/DAC |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Độ phân giải | 14 bits | 14 bit |
| Sample Rate | 105 MSPS (max) | — |
| Number of Channels | 1 | 1 |
| Architecture | Pipelined | Pipelined |
| Input Type | Differential analog | Differential (analog buffered) |
| Analog Supply Voltage | 3.3 V (typical) | — |
| Digital Supply Voltage | 3.3 V or 1.8 V (selectable) | — |
| Output Interface | Selectable parallel CMOS or LVDS | Parallel CMOS / DDR LVDS (selectable) |
| Integral Nonlinearity (INL) | +/-1.5 LSB (typ at 105 MSPS) | — |
| Differential Nonlinearity (DNL) | +/-0.5 LSB (typ) | — |
| Signal-to-Noise Ratio (SNR) | [DATA_NEEDED: SNR dBFS] | — |
| Effective Number of Bits (ENOB) | 11 bits (typ at Nyquist) | — |
| Power Consumption | 130 mW (typ at 105 MSPS, CMOS mode) | — |
| Khoảng nhiệt độ hoạt động | -40C to +85C (industrial) | -40 C to +85 C (Industrial) |
| Hộp | 32-pin VQFN (5x5 mm, RHB) | 32-VQFN (RHB) 5x5 mm with exposed thermal pad |
| Kiểu lắp đặt | Surface Mount | Surface Mount |
| Cấp MSL | 2 (per JEDEC J-STD-020) | 2 (per JEDEC J-STD-020) |
| Trạng thái RoHS | Compliant | Compliant |
| Lead Finish | NiPdAu (lead-free) | — |
| Input Bandwidth | [DATA_NEEDED: small-signal bandwidth MHz] | — |
| Sampling Rate (Maximum) | — | 105 MSPS |
| Full-Scale Input Range | — | 1.0 Vpp to 1.5 Vpp (programmable) |
| Analog Input Bandwidth | — | [DATA_NEEDED: input bandwidth MHz] |
| SNR (9.9 MHz input) | — | [DATA_NEEDED: SNR dBFS at 9.9 MHz] |
| SFDR (70 MHz input) | — | [DATA_NEEDED: SFDR dBFS at 70 MHz] |
| Power Dissipation | — | [DATA_NEEDED: power at 105 MSPS mW] |
| Output Data Format | — | Offset Binary, Twos Complement, or Gray Code |
| Reference | — | Internal or External |
| Supply Voltage (AVDD) | — | [DATA_NEEDED: AVDD V] |
| Wake-up / Sleep Mode | — | Yes (power-down pin) |