BTS3046SDRATMA1 vs BTS4142NHUMA1 So sánh

So sánh chi tiết song song của BTS3046SDRATMA1 bằng Infineon và BTS4142NHUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ Hoạt động
Infineon
BTS4142NHUMA1 BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS3046SDRATMA1 BTS4142NHUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart Low-Side Power Switch (HITFET family) Smart High-Side Power Switch (Classic PROFET 24V)
Manufacturer Infineon Technologies —
Switch Configuration 1:1 N-Channel, single channel —
Continuous Output Current 3.6 A —
On-State Resistance (Rds(on)) 95 mOhm (0.095 ohm) typical —
Operating Voltage Range (Vbb) 4.5 V to 42 V —
Load Type Low-side switch (ground-referenced load) —
Hộp PG-TO252-3-11 (DPAK, 3-pin with tab) PG-SOT223-4
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động -40 C to +150 C —
Protection Features Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD —
Input Logic CMOS-compatible with internal pull-down —
Status Feedback Yes (status output pin) —
Automotive Qualification AEC-Q100 (where variant specified) —
RoHS / Lead-Free Compliant / Yes —
Number of Channels — 1
Switch Topology — High-side, N-channel vertical MOSFET
Nominal Output Current — 1.4 A
On-State Resistance (RDS(on)) — 70 mOhm (typical)
Điện áp cung cấp hoạt động — 6 V to 42 V
Load-Dump Protection — Yes (integrated overvoltage clamp)
Overload Protection — Yes (current limiting)
Thermal Protection — Yes (shutdown with auto-restart)
Undervoltage Shutdown — Yes (auto-restart with hysteresis)
ESD Protection (Input Pin) — Yes
Diagnostic Feedback — Yes (open-load, fault)
Nhiệt độ hoạt động — -40C to +150C (junction)
Trạng thái RoHS — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá