BTS3256DAUMA1 vs BTS70402EPGXUMA1 So sánh

So sánh chi tiết song song của BTS3256DAUMA1 bằng Infineon và BTS70402EPGXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS3256DAUMA1 BTS3256DAUMA1 - 7.5A Smart Low-Side Switch | Infineon HITFET

BTS3256DAUMA1 - 7.5A Smart Low-Side Switch | Infineon HITFET

BTS3256DAUMA1 ✓ Hoạt động
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS3256DAUMA1 BTS70402EPGXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart Low-Side Power Switch —
Technology HITFET (N-channel vertical DMOS) —
Number of Channels 1 4
Cấu hình đầu ra Low-Side, 1:1 High-side, N-channel MOSFET
Continuous Drain Current 7.5 A —
Operating Voltage Range 4.5 V to 28 V (load supply Vbb) 6 V to 18 V nominal (load-dump tolerant to 40 V)
On-State Resistance (RDS(on)) 50 mOhm typical —
Overvoltage Clamp Integrated —
Tắt nhiệt Yes (with auto-restart) —
Current Limitation Yes (integrated) —
Status Feedback Yes (open-drain status pin) —
ESD Protection Yes (per datasheet) —
Operating Temperature (Junction) -40 C to +150 C —
Hộp PG-TO252-5-11 (DPAK-5) PG-TSDSO-14 (exposed thermal pad)
Kiểu lắp đặt Surface Mount Surface Mount
Automotive Qualified Yes (AEC-Q100) —
RoHS Compliance Compliant Compliant
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
Chức năng — Smart High-Side Power Switch
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Protection Features — Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Interface — SPI status register, current-sense feedback
Khoảng nhiệt độ hoạt động — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá