BTS5215LAUMA1 vs ITS716GFUMA1 So sánh

So sánh chi tiết song song của BTS5215LAUMA1 bằng Infineon và ITS716GFUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS5215LAUMA1 BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 ✓ Hoạt động
Infineon
ITS716GFUMA1 ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon

ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon

ITS716GFUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS5215LAUMA1 ITS716GFUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch Smart High-Side Power Switch
Number of Channels 2 4
On-State Resistance (RDS(on)) 90 mΩ typical per channel —
Continuous Output Current per Channel 3.7 A —
Operating Voltage Range 8 V to 36 V —
Standby Current Very low (datasheet value [DATA_NEEDED: standby current uA]) [DATA_NEEDED: Iq standby typical]
Input Logic Compatibility CMOS-compatible, ground-referenced —
Diagnostic Feedback Status feedback per channel —
MOSFET Technology N-channel vertical power MOSFET with charge pump —
Load Type Support Resistive and inductive loads —
Protection Features Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage Overload, short-circuit, over-temperature, over-voltage, ESD
Demagnetization Fast demagnetization of inductive loads —
Hộp PG-DSO-12-9 PG-DSO-20-32 (20-pin SOIC, exposed pad)
Nhiệt độ hoạt động -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] —
Trạng thái RoHS Compliant Compliant
Cấu hình đầu ra — High-side (N-Channel MOSFET)
Continuous Current per Channel — 2.3 A
On-State Resistance (RON) per Channel — [DATA_NEEDED: Ron typical value]
Operating Voltage Range (Vbb) — 5 V to 36 V
Load Dump Tolerance — Up to 45 V
Input Logic Levels — CMOS/TTL compatible, parallel interface
Diagnostic Output — Open-drain fault flag, one per channel
PWM Capability — Up to 1 kHz
Khoảng nhiệt độ hoạt động — -40 C to +85 C (industrial grade)
Kháng nhiệt, mối nối đến môi trường — [DATA_NEEDED: theta_JA value]
Kiểu lắp đặt — Surface Mount
Cấp MSL — [DATA_NEEDED: MSL rating]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá