DG408DJ+ vs DG408CJ+ So sánh

So sánh chi tiết song song của DG408DJ+ bằng Analog Devices và DG408CJ+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
DG408DJ+ DG408DJ+ - 8-Channel 100Ω CMOS Analog Mux | Analog Devices

DG408DJ+ - 8-Channel 100Ω CMOS Analog Mux | Analog Devices

DG408DJ+ ✓ Hoạt động
Analog Devices
DG408CJ+ DG408CJ+ - 8:1 CMOS Analog Multiplexer | Analog Devices

DG408CJ+ - 8:1 CMOS Analog Multiplexer | Analog Devices

DG408CJ+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DG408DJ+ DG408CJ+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 8-channel single-ended CMOS analog multiplexer —
Multiplexer Configuration 8:1 8:1 single-ended analog multiplexer
On-Resistance 100 ohm 100 ohm maximum
Number of Channels 8 channels 8 channels
Address Inputs 3 binary inputs: A0, A1, A2 —
Maximum Charge Injection 15 pC —
Input Off-Leakage Current Less than 5 nA at 85°C 5 nA maximum at +85 °C
Signal Conduction Bidirectional —
Device Selection ENABLE input supported —
Hộp 16-pin PDIP 16-pin PDIP
Số chân 16 pins —
Kiểu lắp đặt Through-hole dual in-line package Through-hole
Technology CMOS —
Logic Compatibility TTL/CMOS compatible channel selection TTL/CMOS compatible
Operational Mode Multiplexer; can also be used as a demultiplexer —
Production Status PRODUCTION —
Operating Voltage [DATA_NEEDED: operating voltage] —
Analog Signal Range [DATA_NEEDED: analog signal range] —
Switching Time [DATA_NEEDED: switching time] —
Channel-to-Channel Isolation [DATA_NEEDED: channel-to-channel isolation] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Functions — 1 function
Channel Matching — 8 ohm maximum
On-Resistance Flatness — 9 ohm maximum over the specified signal range
Charge Injection — 15 pC maximum
Single-Supply Voltage Range — +5 V to +30 V
Dual-Supply Voltage Range — ±5 V to ±20 V
Power Consumption — 1.25 mW maximum
Signal Handling — Rail-to-rail
ESD Protection — Greater than 2000 V per MIL-STD-883 Method 3015.7
Process Technology — CMOS

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá