EPC1PC8CC vs EPC1PC8W So sánh

So sánh chi tiết song song của EPC1PC8CC bằng Intel và EPC1PC8W bằng Intel. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC1PC8CC EPC1PC8W
Thương hiệu Intel Intel
Danh mục Memory ICs Memory ICs
Trạng thái vòng đời Obsolete Obsolete
Kích thước bộ nhớ 1 Mbit (1,048,576 bits) 1 Mbit (131,072 x 8 or 1,048,576 bits)
Kiểu bộ nhớ EPROM (OTP, UV-erasable window optional) OTP (One-Time Programmable) Configuration PROM
Chức năng FPGA Configuration PROM —
Configuration Interface Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) —
Supply Voltage VCC 3.0 V to 3.6 V (typical 3.3 V) —
Maximum DCLK Frequency 17.6 MHz (17.6 Mb/s effective bitstream rate) —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: full industrial range from datasheet] —
Hộp PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) 8-pin PDIP (PDIP-8)
Kiểu lắp đặt Through-Hole (DIP socketable) Through-Hole
Cascade Support Not supported in DIP-8 package (nCASC pin not exposed) —
Programming Interface JTAG via Altera Quartus / Quartus Prime ByteBlaster 4-pin serial: nCONFIG, nSTATUS, DATA0, DCLK
Error Detection Built-in CRC during configuration transfer —
Cấp MSL 1 (unlimited floor life) 1 (unlimited floor life, non-moisture-sensitive)
Lead-Free / RoHS Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant —
Compatible FPGA Families ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria —
Số chân 8 —
Giao diện — Altera/Intel proprietary serial configuration (DATA0, DCLK)
Supply Voltage (VCC) — 3.0 V to 3.6 V (3.3 V typical)
Programming Voltage (VPP) — 5.0 V / 12.0 V (per datasheet programming algorithm)
Configuration Compatibility — Altera FLEX, ACEX, APEX, Cyclone, Cyclone II, Stratix
Cascadable — Yes (multiple EPC1 devices can be chained for larger bitstreams)
Nhiệt độ hoạt động — -40C to +85C (industrial, per datasheet)
JTAG/BSD Support — Per datasheet; uses Altera ByteBlaster/USB-Blaster via nCONFIG chain
Trạng thái RoHS — [DATA_NEEDED: rohs status]
Lead-Free — [DATA_NEEDED: lead-free status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá