EPC1PC8CC vs EPC1PC8W 비교
다음의 상세 나란히 비교: EPC1PC8CC 제조: Intel 및 EPC1PC8W 제조: Intel. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | EPC1PC8CC | EPC1PC8W |
|---|---|---|
| 브랜드 | Intel | Intel |
| 카테고리 | Memory ICs | Memory ICs |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $9.95 | $9.85 |
| 메모리 크기 | 1 Mbit (1,048,576 bits) | 1 Mbit (131,072 x 8 or 1,048,576 bits) |
| 메모리 유형 | EPROM (OTP, UV-erasable window optional) | OTP (One-Time Programmable) Configuration PROM |
| 기능 | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | — |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| 동작 온도 범위 | [DATA_NEEDED: full industrial range from datasheet] | — |
| 패키지 | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (PDIP-8) |
| 실장 유형 | Through-Hole (DIP socketable) | Through-Hole |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | 4-pin serial: nCONFIG, nSTATUS, DATA0, DCLK |
| Error Detection | Built-in CRC during configuration transfer | — |
| MSL 레벨 | 1 (unlimited floor life) | 1 (unlimited floor life, non-moisture-sensitive) |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| 핀 수 | 8 | — |
| 인터페이스 | — | Altera/Intel proprietary serial configuration (DATA0, DCLK) |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Programming Voltage (VPP) | — | 5.0 V / 12.0 V (per datasheet programming algorithm) |
| Configuration Compatibility | — | Altera FLEX, ACEX, APEX, Cyclone, Cyclone II, Stratix |
| Cascadable | — | Yes (multiple EPC1 devices can be chained for larger bitstreams) |
| 동작 온도 | — | -40C to +85C (industrial, per datasheet) |
| JTAG/BSD Support | — | Per datasheet; uses Altera ByteBlaster/USB-Blaster via nCONFIG chain |
| RoHS 상태 | — | [DATA_NEEDED: rohs status] |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |