ICL7136CQH+D vs ICL7136CMH So sánh

So sánh chi tiết song song của ICL7136CQH+D bằng Analog Devices và ICL7136CMH bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ICL7136CQH+D ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D ✓ Hoạt động
Analog Devices
ICL7136CMH ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ICL7136CQH+D ICL7136CMH
Thương hiệu Analog Devices Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Hoạt động Hoạt động
Converter Type Dual-slope A/D converter —
Độ phân giải 3.5 digits 3.5 digits
Architecture 1-channel, 1-function ADC —
Input Configuration True differential input —
Reference Configuration True differential reference —
Output Format BCD, 4-bit, parallel output —
Display Output Integrated LCD driver 3.5-digit, seven-segment display driver
Power Class Low-power A/D converter —
Periodic Interference Rejection Automatic dual-slope rejection —
Overrange Recovery Zero-integrator phase —
Ratiometric Measurement Supported —
Package Type 44-pin PLCC MQFP-44 (10 mm × 10 mm)
Package Dimensions 16.59 mm x 16.59 mm —
Package Code QCCJ —
Terminal Form J-bend —
Number of Terminals 44 —
Trạng thái RoHS [DATA_NEEDED: RoHS status] RoHS compliant
REACH Status [DATA_NEEDED: REACH status] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Phạm vi điện áp đầu vào [DATA_NEEDED: input voltage range] —
Reference Voltage Range [DATA_NEEDED: reference voltage range] —
Conversion Time [DATA_NEEDED: conversion time] —
Input Impedance [DATA_NEEDED: input impedance] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Normal Mode Rejection [DATA_NEEDED: normal-mode rejection] —
Offset Error [DATA_NEEDED: offset error] —
Gain Error [DATA_NEEDED: gain error] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
ADC Type — 3.5-digit dual-slope A/D converter
Number of Input Channels — 1 channel
Input Architecture — True differential
Reference Architecture — Differential reference
Calibration — Automatic calibration
Điện áp cung cấp hoạt động — 9 V
Power Dissipation — 500 mW (1/2 W)
Minimum Operating Temperature — 0 °C
Maximum Operating Temperature — 70 °C
Số lượng chân — 44 pins
Kiểu lắp đặt — Surface mount
Screening Level — Commercial
Technology — CMOS

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá