ISL83491IP vs ISL83485IP So sánh
So sánh chi tiết song song của ISL83491IP bằng Renesas Electronics và ISL83485IP bằng Renesas Electronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Renesas Electronics
ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas
ISL83485IP ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | ISL83491IP | ISL83485IP |
|---|---|---|
| Thương hiệu | Renesas Electronics | Renesas Electronics |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | 1/1 RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Technology | BiCMOS | — |
| Operating Mode | High-speed or slew-rate-limited | — |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin PDIP | — |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Logic and Communication | Balanced differential RS-485/RS-422 | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 10 Mbps |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Supply Shutdown Current | [DATA_NEEDED: shutdown current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half duplex |
| Điện áp cung cấp | — | 3.3 V |
| Process Technology | — | BiCMOS |
| Power Consumption Profile | — | Low power |
| Signal Type | — | Balanced differential |
| Hộp | — | 8-pin PDIP |
| Driver Enable Control | — | [DATA_NEEDED: driver enable logic polarity and pin assignment] |
| Receiver Enable Control | — | [DATA_NEEDED: receiver enable logic polarity and pin assignment] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential receiver sensitivity] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |
| Điện áp cung cấp | — | [DATA_NEEDED: typical and maximum supply current] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |