ISL83491IP vs ISL83485IP तुलना

विस्तृत दोनों ओर की तुलना ISL83491IP द्वारा Renesas Electronics और ISL83485IP द्वारा Renesas Electronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Renesas Electronics
ISL83491IP ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas

ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas

ISL83491IP ✓ सक्रिय
Renesas Electronics
ISL83485IP ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP ✓ सक्रिय

विशेषता तुलना

पैरामीटर ISL83491IP ISL83485IP
ब्रांड Renesas Electronics Renesas Electronics
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 1/1 RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Driver Count 1 driver —
Receiver Count 1 receiver —
Technology BiCMOS —
Operating Mode High-speed or slew-rate-limited —
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Package Type 14-pin PDIP —
माउंटिंग प्रकार Through-hole Through-hole
Logic and Communication Balanced differential RS-485/RS-422 —
Maximum Data Rate [DATA_NEEDED: maximum data rate] 10 Mbps
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
Supply Shutdown Current [DATA_NEEDED: shutdown current] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Transceiver Configuration — 1 driver / 1 receiver
Duplex Mode — Half duplex
सप्लाई वोल्टेज — 3.3 V
Process Technology — BiCMOS
Power Consumption Profile — Low power
Signal Type — Balanced differential
पैकेज — 8-pin PDIP
Driver Enable Control — [DATA_NEEDED: driver enable logic polarity and pin assignment]
Receiver Enable Control — [DATA_NEEDED: receiver enable logic polarity and pin assignment]
Maximum Supply Voltage — [DATA_NEEDED: maximum supply voltage]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: differential receiver sensitivity]
Maximum Driver Output Current — [DATA_NEEDED: maximum driver output current]
सप्लाई करंट — [DATA_NEEDED: typical and maximum supply current]
ESD Protection Rating — [DATA_NEEDED: ESD protection rating]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध