LM2903DG4 vs LM2903DRG3 So sánh
So sánh chi tiết song song của LM2903DG4 bằng Texas Instruments và LM2903DRG3 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903DG4 - Dual Open-Collector Comparator | Texas Instruments
LM2903DG4 ✓ Hoạt độngTexas Instruments
LM2903DRG3 - Dual Open-Collector Comparator | Texas Instruments
LM2903DRG3 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903DG4 | LM2903DRG3 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual Differential Comparator |
| Number of Channels | 2 channels | — |
| Supply Configuration | Single or dual supply | — |
| Maximum-Rated Supply Voltage | 32 V | — |
| Tested Differential Input Voltage | 30 V | — |
| Supply-Current Drain | 0.4 mA typical per comparator | — |
| Kiểu đầu ra | Open-collector | Open-Collector (compatible with TTL, MOS and CMOS) |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Common-Mode Input Range | Includes ground | — |
| Hộp | 8-pin SOIC, 0.154 inch (3.90 mm) width | 8-SOIC (0.154 in / 3.90 mm width) |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 0.37 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 3.5 nA |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Elements | — | 2 |
| Supply Voltage Range (Single Supply) | — | 2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | ±1 V to ±18 V |
| Maximum Rated Supply Voltage | — | up to 38 V |
| Supply Current per Comparator | — | 200 µA |
| Response Time | — | 1 µs |
| ESD Rating (HBM) | — | 2 kV |
| Differential Input Voltage Range | — | ±38 V |
| Common-Mode Input Voltage Range | — | Includes ground |
| Supplier Packaging | — | Tape & Reel |