LM2903VQPWRG4Q1 vs LM2903VQPWR So sánh
So sánh chi tiết song song của LM2903VQPWRG4Q1 bằng Texas Instruments và LM2903VQPWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903VQPWRG4Q1 - 30V Dual Comparator | Texas Instruments
LM2903VQPWRG4Q1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903VQPWRG4Q1 | LM2903VQPWR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Logic ICs | Logic ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 independent channels |
| Channel Independence | 2 independent comparators | — |
| Kiểu đầu ra | Open-collector | Open-collector |
| Supply Voltage Maximum | 30 V | — |
| Supply Voltage Minimum | 2 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Supply Current per Comparator | 0.4 mA typical | — |
| Input Offset Voltage at 25°C | 7 mV maximum | — |
| Nominal Response Time | 1.3 us | — |
| Enhanced ESD Performance | 2 kV | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | [DATA_NEEDED: AEC-Q100 qualification status] |
| Khoảng nhiệt độ hoạt động | -40°C to +150°C | -40°C to +125°C |
| Hộp | 8-pin TSSOP | 8-pin TSSOP (PW) |
| Package Length | 3 mm | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Supply Configuration | Single supply or dual supplies | Single supply or dual supply |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail |
| Maximum Input Bias Current | [DATA_NEEDED: maximum input bias current] | — |
| Input Common-Mode Voltage | [DATA_NEEDED: input common-mode voltage range] | — |
| Manufacturer Datasheet Document Number | [DATA_NEEDED: datasheet document number] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Package Type | — | TSSOP-8 surface-mount package |
| Số lượng chân | — | 8 pins |
| Comparator Input Type | — | Inverting and non-inverting differential inputs |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |