LM2903VQPWR - Dual 36V Comparator | Texas Instruments
MPN: LM2903VQPWR ✓ Hoạt độngLM2903VQPWR Tóm tắt
A dual comparator is an analog integrated circuit that compares two input voltages and produces a digital-level output indicating which input is higher. As a comparator within the broader analog IC and semiconductor hierarchy, the LM2903VQPWR provides the conversion of small analog voltage differences into logic-compatible decisions. Its two independent channels can monitor two thresholds, or they can be combined for window comparison and other system-level functions.
The principal features include two independent comparators, a wide 2 V to 36 V supply range, rail-to-rail input capability, open-collector outputs, and an operating temperature range of -40°C to +125°C. The open-collector outputs require an external pull-up resistor and allow several outputs to be connected for wired-AND behavior. This architecture is useful when driving open-drain logic, relay interfaces, or indicators with a compatible pull-up voltage.
The LM2903 family is designed for general-purpose comparison rather than continuous analog amplification. Each channel compares an inverting input with a non-inverting input, while its output changes state according to the input relationship. Rail-to-rail input behavior allows the input voltages to approach the supply rails, although common-mode and output-state details should be checked against the manufacturer datasheet for the exact operating conditions.
Typical uses include threshold detection, industrial sensor interfaces, overvoltage and undervoltage monitoring, control-system signal conditioning, and open-collector logic interfaces. The 8-pin TSSOP package supports compact surface-mount layouts, while the -40°C to +125°C temperature range makes the device suitable for industrial and automotive-style environments when the complete system requirements support that operating range.
For PCB design, reserve the pull-up network required by the open-collector outputs and keep comparator input routing away from high-current switching paths. Account for input common-mode limits, output pull-up voltage, supply decoupling, and logic thresholds in the connected system. The manufacturer pin-description table should be used directly when assigning PCB tracks and confirming the numbering of the PW package.
This product page consolidates the core electrical characteristics, replacement options, application guidance, and package-level design considerations into a practical selection reference. It also provides a parameter-by-parameter comparison that helps engineers distinguish standard, automotive, and lead-free orderable variants before committing to a PCB footprint.
Bộ thay thế dễ dàng lắp đặt cho LM2903VQPWR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2903VQPWR (cùng hình factor và footprint) — khác nhau ở Comparator Type, Number of Channels, Package, Supply Configuration, Operating Temperature Range.
LM2903VQPWRQ1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2903VQPWRG4Q1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2903PWRG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2903QPWRQ1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2903PWR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2903VQPWR Tỷ lệ tối đa & tính chất điện
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 independent channels |
| Supply Voltage Range | 2 V to 36 V |
| Input Common-Mode Range | Rail-to-rail |
| Kiểu đầu ra | Open-collector |
| Khoảng nhiệt độ hoạt động | -40°C to +125°C |
| Hộp | 8-pin TSSOP (PW) |
| Package Type | TSSOP-8 surface-mount package |
| Kiểu lắp đặt | Surface mount |
| Số lượng chân | 8 pins |
| Comparator Input Type | Inverting and non-inverting differential inputs |
| Supply Configuration | Single supply or dual supply |
| Output Pull-Up Requirement | External pull-up resistor required |
Hướng dẫn cấu hình chân LM2903VQPWR tssop-8 surface-mount package
Cấu hình chân cho LM2903VQPWR (tssop-8 surface-mount package gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM2903VQPWR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM2903VQPWR phù hợp cho 6 Áp dụngs: Industrial Threshold Detection, Overvoltage and Undervoltage Monitoring, Automotive Sensor Conditioning, Relay and Open-Drain Interface, Battery Monitoring, Digital Control Signal Conditioning.
Industrial Threshold Detection
The LM2903VQPWR is well suited to industrial threshold detection because it combines two independent differential comparators with a 2 V to 36 V operating range and a -40°C to +125°C temperature specification. Each channel can compare a sensor signal against a reference voltage and convert the result into an open-collector logic event. Use an external pull-up resistor to establish the logic-high level, and route the two channels separately when monitoring overvoltage and undervoltage conditions. The wide supply range permits operation across common industrial voltage ranges, while the TSSOP package supports compact control hardware.
Được đề xuất
Overvoltage and Undervoltage Monitoring
The two channels in the LM2903VQPWR can implement independent overvoltage and undervoltage monitoring around a common reference node. One comparator handles the upper threshold while the other handles the lower threshold, allowing the system to identify whether an input remains inside a permitted operating window. Its 2 V to 36 V supply range supports a broad range of monitored rails, and the open-collector outputs can drive fault indicators or wired-AND logic through suitable pull-up networks. The -40°C to +125°C rating supports industrial environments where threshold accuracy and operating range are important design constraints.
Được đề xuất
Automotive Sensor Conditioning
LM2903VQPWRQ1 provides the same dual-comparator and 2 V to 36 V operating architecture in an automotive-oriented ordering variant for sensor-conditioning and safety-monitoring circuits. A sensor signal can be compared with a precise reference, after which the open-collector output provides a flexible interface to logic, lamp drivers, or fault-reporting circuits. The PW TSSOP package supports compact board layouts, while the documented -40°C to +125°C range accommodates demanding vehicle environments. Engineers should verify the complete Q1 qualification details, input common-mode behavior, and pull-up voltage against the manufacturer datasheet.
Được đề xuất
Relay and Open-Drain Interface
The open-collector outputs of the LM2903VQPWR are useful when driving relay-driver stages, open-drain logic, or other devices that require a pulled-up output. Both channels can switch independent loads, and multiple open-collector outputs may share a pull-up when a wired-AND fault structure is appropriate. This arrangement reduces the need for a dedicated push-pull output driver and provides a simple way to combine fault signals. The pull-up voltage must be selected to match the downstream logic, while the supply must remain between 2 V and 36 V and the output loading must satisfy the device limits.
Được đề xuất
Battery Monitoring
The LM2903VQPWR can monitor two battery-related voltage thresholds by assigning one comparator to a high-limit event and the other to a low-limit event. Its 2 V to 36 V operating range is appropriate for many battery packs and industrial energy systems, while the two independent channels reduce the component count compared with separate single comparators. The open-collector results can feed a controller, charger, or fault indicator through pull-up networks. Designers should verify the common-mode range at each battery voltage, include suitable filtering for noisy sources, and account for the comparator’s switching behavior during threshold crossings.
Được đề xuất
Digital Control Signal Conditioning
The LM2903VQPWR can convert analog control signals into open-collector digital events for controllers, counters, and programmable logic interfaces. Each differential comparator evaluates an incoming control voltage against a reference, and its output can pull a logic rail low when the selected condition is met. The 2 V to 36 V supply range provides flexibility in industrial control systems, and the TSSOP package reduces board area compared with larger dual-comparator packages. Pull-up resistors should be placed near the receiving logic when trace length is significant, and input traces should remain away from switching nodes to avoid false threshold transitions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM2903VQPWR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LM2903VQPWRQ1 | LM2903VQPWRG4Q1 | LM2903PWRG4 | LM2903QPWRQ1 | LM2903PWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Comparator Type | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels |
| Operating Voltage Range | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Qualification Class | Standard | Automotive Q1 | Automotive Q1 and G4 | Standard G4 | Automotive Q1 | Standard |
| Special Feature | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs |
Bảo phân biệt quan trọng
- Two independent comparators in one package (vsLM2901AVQPWR)
- Wide operating-voltage range (vsLM2901AVQPWR)
- Automotive-oriented ordering options (vsLM2903PWR)
- Open-collector interface flexibility (vsLM2903VQPWRQ1)
Ghi chú thiết kế
Do not treat an open-collector output as a push-pull logic output. Each output requires an external pull-up resistor, and the selected pull-up voltage must remain compatible with the connected logic and the comparator’s output limits. When several outputs share a pull-up, verify that the resulting wired-AND behavior is intentional and that the total sink-current requirement remains within the device limit.
Place pull-up resistors close to the logic devices that receive the open-collector signals, especially when traces are long or the board contains switching nodes. Route the two differential input pairs as compact, matched paths where practical, and maintain separation from power inductors, relay contacts, and high-current return paths. Confirm all pin assignments from the manufacturer pin-description table before releasing the PCB layout.
Use the manufacturer’s recommended bypass arrangement at the supply pins and keep the supply decoupling loop compact. Although the comparator accepts a broad 2 V to 36 V operating range, the connected pull-up network, input references, and output loads may impose tighter limits. Check the complete operating-voltage boundary for every external component instead of applying only the comparator’s headline supply rating.
For noisy sensor or battery signals, filter the input sufficiently to prevent comparator chatter near the switching threshold. The input network must not distort the intended threshold relationship or exceed the allowable input bias and common-mode behavior. Use hysteresis or positive feedback when repeated switching around a noisy reference would otherwise generate excessive output transitions.
Thông tin tuân thủ
Compliance declarations were not stated for the exact orderable MPN. The Q1 variants are automotive-oriented, but the exact AEC-Q100 status must be confirmed from the manufacturer ordering and qualification documentation.