LM293DRE4 vs LM293DT So sánh
So sánh chi tiết song song của LM293DRE4 bằng Texas Instruments và LM293DT bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM293DRE4 Dual Differential Comparator 36V | Texas Instruments
LM293DRE4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM293DRE4 | LM293DT |
|---|---|---|
| Thương hiệu | Texas Instruments | STMicroelectronics |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual voltage comparator |
| Number of Comparators | 2 | — |
| Kiểu đầu ra | Open-collector, open-drain | Open-collector, open-drain |
| Supply Configuration | Single supply or dual supplies | — |
| Maximum Tested Supply Voltage | 36 V | — |
| Supply Voltage Difference | 2 V to 36 V | — |
| Common-Mode Input Range | Includes ground | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Output Compatibility | TTL, MOS, and CMOS | — |
| Output Saturation | Low output saturation voltage | — |
| Industrial Temperature Grade | Industrial grade | — |
| Hộp | 8-SOIC, 0.154 inch (3.90 mm) width | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Số lượng chân | 8 | 8 pins |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Single-Supply Operation | — | 2 V to 36 V |
| Input Common-Mode Range | — | Rail-to-rail |
| Điện áp cung cấp | — | 0.4 mA typical |
| Power Consumption per Comparator | — | 1 mW at 5 V |
| Input Bias Current | — | 25 nA typical |
| Input Offset Current | — | ±5 nA typical |
| Input Offset Voltage | — | ±1 mV typical |
| Product Category | — | Standard general-purpose comparator |
| AEC-Q100 Qualification | — | not_applicable |