LM339ADG4 vs LM2904PW So sánh
So sánh chi tiết song song của LM339ADG4 bằng Texas Instruments và LM2904PW bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM339ADG4 - Quad Differential Comparator | Texas Instruments
LM339ADG4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM339ADG4 | LM2904PW |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | General-purpose differential comparator | — |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Propagation Delay | 300 ns | — |
| Kiểu đầu ra | Open-collector | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Input Bias Current | [DATA_NEEDED: typical input bias current] | [DATA_NEEDED: input bias current] |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage, up to ±38 V | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Operating Supply Configurations | Single supply or dual supplies | — |
| Logic Compatibility | TTL, MOS, and CMOS output compatible | — |
| Hộp | 14-SOIC, 3.90 mm width | 8-TSSOP, 4.40 mm width |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Số chân | 14 pins | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |