LM339ADG4 vs LM2904PW 比較
詳細並排比較 LM339ADG4 由 Texas Instruments 與 LM2904PW 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LM339ADG4 | LM2904PW |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | General-purpose differential comparator | — |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Propagation Delay | 300 ns | — |
| 輸出類型 | Open-collector | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Input Bias Current | [DATA_NEEDED: typical input bias current] | [DATA_NEEDED: input bias current] |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage, up to ±38 V | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Operating Supply Configurations | Single supply or dual supplies | — |
| Logic Compatibility | TTL, MOS, and CMOS output compatible | — |
| 封裝 | 14-SOIC, 3.90 mm width | 8-TSSOP, 4.40 mm width |
| 安裝類型 | Surface mount | Surface mount |
| 腳位數 | 14 pins | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |