LT1014DSW vs LT1014ISW So sánh

So sánh chi tiết song song của LT1014DSW bằng Analog Devices và LT1014ISW bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
LT1014DSW LT1014DSW - Quad Precision Op Amp, 5V-44V | Analog Devices

LT1014DSW - Quad Precision Op Amp, 5V-44V | Analog Devices

LT1014DSW ✓ Hoạt động
Analog Devices
LT1014ISW LT1014ISW - Quad Precision Op Amp, 16-SO | ADI

LT1014ISW - Quad Precision Op Amp, 16-SO | ADI

LT1014ISW ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số LT1014DSW LT1014ISW
Thương hiệu Analog Devices Analog Devices
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type Quad precision operational amplifier —
Number of Amplifiers 4 circuits 4 amplifiers
Supply Voltage Range 5 V to 44 V —
Single-Supply Operation 5 V —
Dual-Supply Operation ±15 V —
Guaranteed Maximum Supply Current 500 uA —
Low-Voltage Noise 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz 0.55 µV peak-to-peak from 0.1 Hz to 10 Hz
Current Noise Density 0.07 pA/sqrt(Hz) —
Hộp 16-lead SO surface-mount package 16-lead SOIC, 2.64 mm height
Kiểu lắp đặt Surface Mount —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 50 µV maximum
Input Offset Voltage Drift [DATA_NEEDED: input offset voltage temperature coefficient] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] 8 million V/V
Input Bias Current [DATA_NEEDED: input bias current] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Slew Rate [DATA_NEEDED: slew rate] —
Gain-Bandwidth Product [DATA_NEEDED: gain-bandwidth product] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Precision — 50 µV offset voltage
Input Offset Drift — 0.3 µV/°C
Input Offset Current — 0.15 nA
Common-Mode Rejection Ratio — 117 dB
Power-Supply Rejection Ratio — 120 dB
Input Current Noise — 0.07 pA/√Hz
Điện áp cung cấp — 500 µA maximum
Typical Supply Current — 350 µA
Supported Supply Configuration — ±15 V or single 5 V
Single-Supply Input Range — Input range extends to ground
Nhiệt độ hoạt động — -40 °C to +85 °C
RoHS Compliance — [DATA_NEEDED: RoHS status]
REACH Compliance — [DATA_NEEDED: REACH status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá