LT1014DSW - Quad Precision Op Amp, 5V-44V | Analog Devices
MPN: LT1014DSW ✓ Hoạt độngLT1014DSW Tóm tắt
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to establish gain, filtering, buffering, and signal-conditioning behavior. The LT1014 belongs to the precision operational amplifier hierarchy, where low offset voltage, low drift, low noise, and high open-loop gain support accurate measurements rather than general-purpose signal amplification. Four independent amplifiers in one package also reduce board area in multichannel analog systems.
The LT1014DSW operates from single 5 V or dual ±15 V supplies. Its low-voltage noise of 0.55 uV peak-to-peak and current-noise density of 0.07 pA per square-root hz are useful for high-impedance sensor interfaces, strain-gauge amplifiers, and precision current-loop transmitters. The maximum supply current of 500 uA supports battery-powered instrumentation where current consumption is important.
Analog Devices describes the LT1014 as the first precision quad operational amplifier that upgrades designs using the industry-standard 14-pin DIP configuration associated with LM324, LM348, OP-11, and 4156 devices. The LT1014DSW places four precision amplifiers in a 16-lead SO package. Compared with the referenced older quad devices, the LT1014 family emphasizes precision offset and drift characteristics, low noise, high gain, and low supply current while retaining a familiar quad operational-amplifier organization.
Typical applications include battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation-amplifier input stages, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. Multiple independent channels can process several sensor signals while sharing supply filtering and board space. In active filters, the four channels may implement cascaded stages or parallel signal paths, provided each amplifier remains inside its specified common-mode and output limits.
Designers should verify input common-mode range, output swing, supply headroom, stability with the selected load capacitance, and offset requirements against the application. Decoupling capacitors should be placed close to the supply pins, while precision feedback and gain-setting resistors should be selected for the required noise and temperature-drift performance. The LT1014DSW is appropriate when low noise, low supply current, and four precision channels are more important than the lower cost or simplicity of a general-purpose amplifier.
Bộ thay thế dễ dàng lắp đặt cho LT1014DSW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LT1014DSW (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Low-Voltage Noise, Mounting Type, Number of Amplifiers, Package.
LT1014ISW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LT1014ASW
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LT1014CSW
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LT1014DSW Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Quad precision operational amplifier |
| Number of Amplifiers | 4 circuits |
| Supply Voltage Range | 5 V to 44 V |
| Single-Supply Operation | 5 V |
| Dual-Supply Operation | ±15 V |
| Guaranteed Maximum Supply Current | 500 uA |
| Low-Voltage Noise | 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz |
| Current Noise Density | 0.07 pA/sqrt(Hz) |
| Hộp | 16-lead SO surface-mount package |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân LT1014DSW 16-lead so surface-mount package
Cấu hình chân cho LT1014DSW (16-lead so surface-mount package gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LT1014DSW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LT1014DSW phù hợp cho 6 Áp dụngs: Battery-Powered Precision Instrumentation, Strain-Gauge Signal Conditioning, Thermocouple Amplification, 4 mA to 20 mA Current-Loop Transmitters, Precision Active Filters, Multiple-Limit Threshold Detection.
Battery-Powered Precision Instrumentation
The LT1014DSW fits battery-powered instrumentation because it combines four precision amplifier channels with a guaranteed maximum supply current of 500 uA. It can operate from a single 5 V rail, reducing the need for dual-supply conversion in portable measurement systems. Low-voltage noise of 0.55 uV peak-to-peak from 0.1 Hz to 10 Hz helps preserve small-signal resolution, while 0.07 pA per square-root hz current noise is useful with high-impedance sources. Designers can use separate channels for sensor conditioning, filtering, reference buffering, and output-stage functions, subject to common-mode and output-swing limits.
Được đề xuất
Strain-Gauge Signal Conditioning
The LT1014DSW is suitable for strain-gauge front ends that amplify small differential sensor voltages while requiring low input-referred noise and low supply consumption. Its 0.55 uV peak-to-peak low-frequency noise and 0.07 pA per square-root hz current-noise density reduce the electrical noise floor relative to many general-purpose amplifiers. Two channels can form instrumentation-amplifier functions, while the remaining channels can provide gain, active filtering, or reference buffering. Component selection for the input bias-current, common-mode range, offset drift, and output-swing requirements must be completed against the manufacturer specifications.
Được đề xuất
Thermocouple Amplification
The LT1014DSW fits low-level thermocouple amplification because thermocouple outputs can be only tens of microvolts per degree and therefore demand low offset, low noise, and stable gain. The device's 0.55 uV peak-to-peak noise from 0.1 Hz to 10 Hz is particularly relevant to slow temperature measurements with substantial low-frequency content. Four channels allow multiple thermocouples or auxiliary cold-junction and filtering functions to share a compact package. The actual error budget must also account for input offset voltage, temperature coefficient, common-mode range, resistor tolerance, and thermocouple connection parasitics.
Được đề xuất
4 mA to 20 mA Current-Loop Transmitters
The LT1014DSW supports 4 mA to 20 mA current-loop transmitter signal paths where low offset and low noise improve the accuracy of the measured control signal. Its low 500 uA maximum supply current and 5 V single-supply capability are useful for compact field transmitters. Individual channels can support current-loop drive, error amplification, filtering, or threshold functions. The amplifier must remain within its input common-mode range and output-swing limits at the operating supply voltage, and the output-current compliance and precision requirements of the complete transmitter need separate verification.
Được đề xuất
Precision Active Filters
The LT1014DSW is well suited to active-filter implementations that need four precision channels, low noise, and a wide supply range from 5 V to 44 V. Its channels can realize cascaded low-pass, high-pass, or band-pass sections when the required gain and phase margins are met. Low-voltage noise of 0.55 uV peak-to-peak is useful when filter output amplitude is small, while the 0.07 pA per square-root hz current-noise specification matters for high-source-impedance networks. Gain-setting resistors should be matched appropriately, and stability with real loads and stray capacitance should be evaluated in simulation and hardware.
Được đề xuất
Multiple-Limit Threshold Detection
The LT1014DSW can implement several independent precision threshold detectors in one 16-lead package, allowing one device to monitor different voltages or control levels. Each amplifier can compare a signal against a reference and provide an amplified or buffered threshold output. The low noise and low supply current support compact monitoring systems, while operation from a single 5 V supply simplifies power architecture. Comparator-like designs still require attention to input offset, common-mode limits, output logic levels, propagation behavior in amplifier operation, and resistor tolerances that determine the actual switching thresholds.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LT1014DSW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LT1014ISW | LT1014ASW | LT1014CSW |
|---|---|---|---|---|
| Package | SO-16 | SO-16 | SO-16 | SO-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
Bảo phân biệt quan trọng
- Four precision channels in one compact SO-16 package (vsLT1013DDRE4)
- Specified low-voltage noise for precision measurements (vsLT1014ISW)
- Wide supply capability for single and dual rails (vsLT1014ASW)
Ghi chú thiết kế
Place the supply bypass capacitor close to the positive and ground pins, with a short return path that avoids shared copper resistance between sensitive amplifier channels. The LT1014DSW operates from a single 5 V supply or dual ±15 V rails, but the usable signal range still depends on common-mode and output-swing limits. Do not treat the full 5 V to 44 V supply capability as a guarantee that every input and output combination remains linear.
Use the manufacturer pin-description table and package drawing when assigning all 16 PCB connections. Keep high-impedance input nodes short, shield them from clock, relay, and switching-converter paths, and avoid routing them beneath switching nodes. Precision gain networks benefit from short, symmetric routing and stable reference grounding because PCB leakage and temperature gradients can otherwise undermine the benefit of low input-referred noise.
Do not substitute the dual LT1013 for the quad LT1014 without redesigning the channel assignments and signal path. The LT1013DDRE4 may appear in family comparisons, but it has two amplifiers rather than four and therefore is not a drop-in replacement. Likewise, confirm the temperature grade of any SO-16 LT1014 replacement against the ambient range and production requirements before approving the substitution.
Thông tin tuân thủ
Compliance status for the exact LT1014DSW ordering code must be confirmed through current Analog Devices product documentation. The related LT1014DSW#PBF listing identifies a lead-free ordering option, but that status was not assigned to the unqualified LT1014DSW MPN.