MAX1480EAEPI+ vs MAX1480AEPI+ So sánh
So sánh chi tiết song song của MAX1480EAEPI+ bằng Analog Devices và MAX1480AEPI+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX1480EAEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480EAEPI+ ✓ Hoạt độngAnalog Devices
MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480AEPI+ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX1480EAEPI+ | MAX1480AEPI+ |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Isolated RS-485/RS-422 transceiver | Isolated RS-485/RS-422 transceiver |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| ESD Protection | ±15 kV | — |
| Isolation | Single-side power isolation | — |
| Receiver Fail-Safe Circuit | Supported | — |
| Standby Mode | Low-power standby | — |
| Khoảng nhiệt độ hoạt động | 0°C to +70°C | [DATA_NEEDED: operating temperature range] |
| Hộp | 28-pin plastic DIP (28-PDIP) | 28-pin PDIP, 0.600 inch, 15.24 mm |
| Total Pin Count | 28 pins | — |
| Kiểu lắp đặt | Through-hole | — |
| Supported Standards | RS-485 and RS-422 | — |
| Logic and Bus Isolation | Electrically isolated | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Tốc độ dữ liệu | — | 250 kbps |
| Supported Interfaces | — | RS-485 and RS-422 |
| Điện áp cung cấp | — | +5 V on the logic side |
| Isolation Architecture | — | Electrically isolated |
| Kiểu lắp đặt | — | Through-hole |
| Logic-Side Supply Architecture | — | Single +5 V supply powers both sides of the interface |
| Application | — | Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces |
| Manufacturer Family | — | MAX1480A/B/C |
| Available Package Configuration | — | 28-pin DIP |
| Isolation Voltage Rating | — | [DATA_NEEDED: isolation voltage rating] |