MAX1480EAEPI+ vs MAX1480AEPI+ 비교

다음의 상세 나란히 비교: MAX1480EAEPI+ 제조: Analog Devices 및 MAX1480AEPI+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX1480EAEPI+ MAX1480AEPI+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Isolated RS-485/RS-422 transceiver Isolated RS-485/RS-422 transceiver
Driver and Receiver Configuration 1 driver and 1 receiver —
Supply Voltage Range 4.5 V to 5.5 V —
ESD Protection ±15 kV —
Isolation Single-side power isolation —
Receiver Fail-Safe Circuit Supported —
Standby Mode Low-power standby —
동작 온도 범위 0°C to +70°C [DATA_NEEDED: operating temperature range]
패키지 28-pin plastic DIP (28-PDIP) 28-pin PDIP, 0.600 inch, 15.24 mm
Total Pin Count 28 pins —
실장 유형 Through-hole —
Supported Standards RS-485 and RS-422 —
Logic and Bus Isolation Electrically isolated —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Duplex Mode — Half-duplex
데이터 속도 — 250 kbps
Supported Interfaces — RS-485 and RS-422
공급 전압 — +5 V on the logic side
Isolation Architecture — Electrically isolated
장착 스타일 — Through-hole
Logic-Side Supply Architecture — Single +5 V supply powers both sides of the interface
Application — Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces
Manufacturer Family — MAX1480A/B/C
Available Package Configuration — 28-pin DIP
Isolation Voltage Rating — [DATA_NEEDED: isolation voltage rating]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청