MAX3070EESD+T vs MAX3070EASD+T So sánh

So sánh chi tiết song song của MAX3070EESD+T bằng Analog Devices và MAX3070EASD+T bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3070EESD+T MAX3070EESD+T - 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3070EESD+T - 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3070EESD+T ✓ Hoạt động
Maxim Integrated
MAX3070EASD+T MAX3070EASD+T - 3.3V RS-485/422 Transceiver | Maxim

MAX3070EASD+T - 3.3V RS-485/422 Transceiver | Maxim

MAX3070EASD+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3070EESD+T MAX3070EASD+T
Thương hiệu Analog Devices Maxim Integrated
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
Supply Voltage Range 2.97 V to 3.63 V —
Nominal Supply Voltage 3.3 V —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Communication Mode Full duplex —
Supported Standards RS-422 and RS-485 —
ESD Protection ±15 kV ±15 kV
Receiver Fail-Safe Behavior Logic-high output when receiver inputs are open or shorted —
Hot-Swap Support Yes Yes
Maximum Data Rate 250 kbps [DATA_NEEDED: maximum data rate]
Hộp 14-pin narrow SOIC 14-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS Compliance Compliant —
REACH Compliance Unaffected —
Moisture Sensitivity Level MSL 1 (unlimited) —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Termination [DATA_NEEDED: external termination requirements] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Logic Levels [DATA_NEEDED: receiver input threshold voltages] —
Điện áp cung cấp — 3.3 V
Driver Count — 1 driver
Receiver Count — 1 receiver
Supported Interfaces — RS-485 and RS-422
Fail-Safe Receiver — Yes
Fail-Safe Open-Input Output — Logic-high
Fail-Safe Shorted-Input Output — Logic-high
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Điện áp cung cấp — [DATA_NEEDED: operating supply current]
Trạng thái RoHS — [DATA_NEEDED: RoHS status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá