Maxim Integrated

MAX3070EASD+T - 3.3V RS-485/422 Transceiver | Maxim

MPN: MAX3070EASD+T ✓ Hoạt động
3.3 V Vdss 14-pin SOIC Package
MOQ: 1 |

MAX3070EASD+T Tóm tắt

The Maxim Integrated MAX3070EASD+T is a 3.3 V RS-485/RS-422 interface transceiver with one driver and one receiver, ±15 kV ESD protection, fail-safe receiver behavior, and hot-swap capability in a 14-pin SOIC package. It is designed for industrial communication links that require both differential signaling and protection against electrostatic discharge encountered during installation or maintenance.

An RS-485/RS-422 transceiver is an interface IC that converts between logic-level signals and balanced differential bus signals. RS-485 supports multipoint, half-duplex communication over longer industrial distances, while RS-422 commonly supports point-to-point, full-duplex links. The MAX3070EASD+T family combines one transmit driver and one receive channel, allowing a compact interface for systems that need both directions of differential data transfer.

The MAX3070EASD+T operates from a 3.3 V supply and provides ±15 kV ESD-protected bus pins. Its fail-safe receiver circuitry guarantees a logic-high output when the receiver inputs are open or shorted. This behavior helps a system interpret an inactive, faulted, or unconnected bus deterministically. The hot-swap feature supports connection of the transceiver to an active bus without the normal startup disturbance associated with an unpowered driver.

Internally, the device integrates an RS-485/422-compatible line driver, differential receiver, fail-safe receiver logic, and hot-swap protection into a single 14-pin surface-mount package. The manufacturer describes the MAX3070E through MAX3079E family as 3.3 V, ±15 kV ESD-protected transceivers. A digital transceiver is distinct from an RF transceiver: its principal function is robust conversion of digital logic levels to and from balanced wired-interface signals.

Typical uses include industrial sensor networks, factory automation equipment, building-control systems, data acquisition units, and communication links between distributed controllers and field devices. The fail-safe receiver is particularly useful where cables can be disconnected or where a system must maintain a predictable state during reconnection. The ±15 kV protection rating is particularly relevant to industrial environments in which exposed cabling and maintenance practices increase ESD risk.

For implementation, place the transceiver close to the connector or board edge so that the protected bus traces are short, and route the balanced differential pair as a tightly coupled pair. Decoupling capacitors should be positioned close to the supply and ground pins. External termination, biasing, and protection components must be selected from the actual cable length, topology, and grounding arrangement rather than added indiscriminately.

This product page combines the manufacturer's electrical and protection details with package information, application guidance, drop-in alternatives, and practical bus-layout considerations. Use the MAX3070E-MAX3079E datasheet for the authoritative pin descriptions, absolute maximum ratings, timing characteristics, and recommended external circuitry before completing a production design.

Bộ thay thế dễ dàng lắp đặt cho MAX3070EASD+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3070EASD+T (cùng hình factor và footprint) — khác nhau ở Package, Product Type.

Analog Devices
Package: 14-pin narrow SOIC
Product Type: RS-485/RS-422 transceiver
So sánh với MAX3070EASD+T →

MAX3071EASD

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Adds 1 receiver channel versus the MAX3070E's 1 receiver; supply, ESD protection, and 14-pin family platform remain aligned

📋 Tham chiếu thay thế (không có trong danh mục)

MAX3072EASD

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Adds 1 receiver channel versus the MAX3070E's 1 receiver; supply and 3.3 V family platform remain aligned

📋 Tham chiếu thay thế (không có trong danh mục)

MAX3073EASD

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin SOIC
Adds 1 receiver channel versus the MAX3070E's 1 receiver; remains within the same 3.3 V transceiver family

📋 Tham chiếu thay thế (không có trong danh mục)

SP3070EEN-L/TR

✅ Drop-In
📦 14-pin SOIC
Cross-brand 1-driver and 1-receiver transceiver in the same package; timing and protection ratings require verification

📋 Tham chiếu thay thế (không có trong danh mục)

ISL83070EIBZA-T

✅ Drop-In
📦 14-pin SOIC
Cross-brand RS-485/RS-422 transceiver in the same package; receiver count, timing, and ESD rating require verification

📋 Tham chiếu thay thế (không có trong danh mục)

MAX3070EASD+T Thông số kỹ thuật

Product Type RS-485/RS-422 interface transceiver
Điện áp cung cấp 3.3 V
Driver Count 1 driver
Receiver Count 1 receiver
Supported Interfaces RS-485 and RS-422
ESD Protection ±15 kV
Fail-Safe Receiver Yes
Fail-Safe Open-Input Output Logic-high
Fail-Safe Shorted-Input Output Logic-high
Hot-Swap Support Yes
Hộp 14-pin SOIC
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MAX3070EASD+T 14-pin soic

Cấu hình chân cho MAX3070EASD+T (14-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 14-pin soic cho MAX3070EASD+T

Không có dữ liệu chân cụ thể sẵn có cho MAX3070EASD+T.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX3070EASD+T phù hợp cho 6 Áp dụngs: Industrial Sensor Networks, Factory Automation Controllers, Building Control Systems, Data Acquisition Equipment, Instrumentation Interfaces, Remote Monitoring Terminals.

🏭

Industrial Sensor Networks

The MAX3070EASD+T fits industrial sensor-network links that require a balanced RS-485 bus and protection during installation. Its 3.3 V operation suits low-voltage embedded controllers, while ±15 kV ESD protection adds a useful barrier on field-accessible cabling. The fail-safe receiver provides a defined logic-high state when a remote sensor is disconnected or its wiring is shorted. Place the transceiver near the field connector, route the bus as a differential pair, and use the manufacturer data sheet to determine termination, biasing, and grounding requirements for the installed cable length.

🏭

Factory Automation Controllers

The MAX3070EASD+T is suitable for connecting factory automation controllers to remote actuators, modules, and operator panels over a shared differential bus. One driver and one receiver support the communication direction required by a half-duplex RS-485 node, while the 3.3 V supply simplifies integration with modern embedded logic. Its hot-swap feature is useful when equipment may be attached to an active network during maintenance. Confirm node direction, baud rate, termination, and bus biasing in firmware and with the MAX3070E-MAX3079E manufacturer data sheet before deployment.

🏠

Building Control Systems

The MAX3070EASD+T can bridge low-voltage building-control electronics to RS-485 devices such as distributed sensors, HVAC controllers, or lighting interfaces. The balanced interface is appropriate for building wiring that may connect equipment from different rooms or service areas. ±15 kV ESD protection helps address electrostatic discharge encountered during installation and servicing, while fail-safe logic avoids uncertain receiver states when a peripheral is unplugged. Locate the transceiver near the external connector, keep the differential route short and balanced, and verify grounding arrangements with the complete system design.

📊

Data Acquisition Equipment

The MAX3070EASD+T is appropriate for data-acquisition units that distribute commands and collect measurements across several remote channels. Its 3.3 V operation permits direct integration with compact embedded systems, and the one-driver, one-receiver arrangement supports a controlled bidirectional RS-485 node. Fail-safe receiver behavior gives the host processor a predictable state when a sensor cable is open or shorted. Use a controlled bus master, define node addresses in firmware, and confirm termination and fail-safe bias values against the cable topology to prevent reflections and undefined bus levels.

🔬

Instrumentation Interfaces

The MAX3070EASD+T can provide the physical bus layer for laboratory and test instruments that exchange commands or measurement results over RS-485. Its ±15 kV ESD protection is valuable when users connect external leads, and the fail-safe receiver supports stable interpretation of an inactive connected device. The hot-swap characteristic also improves serviceability when a portable instrument joins an operating bus. Keep the analog and digital grounding strategy controlled, place protection and termination components according to the manufacturer's application guidance, and avoid routing the protected bus traces through high-impedance leakage-prone areas.

🧩

Remote Monitoring Terminals

The MAX3070EASD+T supports compact remote monitoring terminals that exchange status and control data over a wired differential network. A 3.3 V transceiver is useful in battery- or energy-conscious installations where the communications device operates alongside low-voltage sensors. The fail-safe feature improves behavior after power restoration or cable reconnection, while hot-swap capability reduces disruption when nodes join an active bus. Configure the node to remain undriven when not selected, use deterministic address and retry logic, and validate the complete bus with realistic cable lengths and termination.

Tóm tắt các sản phẩm được đề xuất

MAX3070EASD+T Maxim Integrated Được sử dụng trong: Industrial Sensor Networks, Factory Automation Controllers, Building Control Systems, Data Acquisition Equipment, Instrumentation Interfaces, Remote Monitoring Terminals MAX3071EASD same-family transceiver candidate with additional receiver capability Được sử dụng trong: Industrial Sensor Networks, Remote Monitoring Terminals MAX3072EASD same-family multi-receiver interface candidate Được sử dụng trong: Factory Automation Controllers ISL83070EIBZA-T same-package interface transceiver candidate Được sử dụng trong: Building Control Systems MAX3073EASD same-family receiver-expansion candidate Được sử dụng trong: Data Acquisition Equipment SP3070EEN-L/TR same-package interface transceiver candidate Được sử dụng trong: Instrumentation Interfaces
What is the MAX3070EASD+T?
The MAX3070EASD+T is a 3.3 V RS-485/RS-422 interface transceiver with one driver, one receiver, ±15 kV ESD protection, fail-safe receiver behavior, and hot-swap capability. According to the MAX3070E-MAX3079E manufacturer datasheet, the device is intended for robust balanced-wired communications and is available in a 14-pin SOIC package for surface-mounted industrial equipment.
Where can I download the MAX3070EASD+T datasheet PDF?
The MAX3070EASD+T datasheet PDF is available from Analog Devices at the MAX3070E-MAX3079E manufacturer datasheet link on this page. It documents the shared family specifications, including the 3.3 V supply, one-driver and one-receiver configuration, ±15 kV ESD protection, fail-safe operation, hot-swap capability, electrical characteristics, and package information.
Where can I find the MAX3070EASD+T pinout?
The MAX3070EASD+T pinout is identified in the MAX3070E-MAX3079E manufacturer datasheet under the package and pin-description information. The device uses a 14-pin SOIC package, with supply, ground, driver input and output, receiver input and output, and control functions assigned to specific pins. Use that pin-description table when assigning PCB tracks.
What are the key specifications of MAX3070EASD+T that engineers should know?
The key MAX3070EASD+T specifications are a 3.3 V supply, one driver, one receiver, support for both RS-485 and RS-422, ±15 kV ESD protection, fail-safe receiver operation, hot-swap capability, and a 14-pin SOIC package. According to the MAX3070E-MAX3079E manufacturer datasheet, fail-safe logic guarantees a high receiver output when the bus inputs are open or shorted.
Can the MAX3070EASD+T replace the MAX3070EASD+?
The MAX3070EASD+T and MAX3070EASD+ refer to the same MAX3070E device configuration in the manufacturer family, with the suffix identifying the order packaging code. The MAX3070EASD+ is listed as a 14-SOIC, 3.3 V, full RS-485/RS-422 one-driver and one-receiver transceiver. Confirm the exact suffix, reel orientation, and orderable marking before approving it for a new assembly.
What is the best drop-in replacement for MAX3070EASD+T?
A suitable replacement must match the 14-pin SOIC footprint and preserve the one-driver, one-receiver, 3.3 V RS-485/RS-422 interface. The MAX3070E family members and listed same-package interface transceivers provide candidates to evaluate, but the MAX3070E-MAX3079E manufacturer datasheet should be used to confirm exact pin functions, receiver count, logic levels, timing, and protection ratings before substitution.
Is the MAX3070EASD+T suitable for industrial RS-485 equipment?
The MAX3070EASD+T is suitable for many industrial RS-485 interfaces because it combines a 3.3 V supply, ±15 kV ESD protection, fail-safe receiver logic, and hot-swap capability. These features address common bus-installation and reconnection hazards. The completed equipment must still satisfy its applicable isolation, surge, immunity, environmental, and safety requirements.
How does fail-safe operation help an RS-485 system using the MAX3070EASD+T?
Fail-safe operation prevents a disconnected or shorted bus from leaving the receiver output in an indeterminate state. According to the MAX3070E-MAX3079E manufacturer datasheet, the receiver produces a logic-high output when its inputs are open or shorted. This gives firmware a defined condition while a remote node is absent, wiring is incomplete, or a fault occurs.
Why is hot-swap useful in a MAX3070EASD+T communication port?
Hot-swap capability lets a transceiver connect to an active bus without the driver attempting to force a conflicting state during startup. The MAX3070E-MAX3079E manufacturer datasheet identifies hot-swap as a family feature. In practical systems, this behavior supports maintenance operations and reduces startup disturbances when equipment is attached to a running multidrop network.
What is the difference between the MAX3070EASD+T and SP3070EEN-L/TR?
The MAX3070EASD+T is a Maxim Integrated 3.3 V RS-485/RS-422 transceiver with one driver, one receiver, ±15 kV ESD protection, fail-safe logic, hot-swap capability, and a 14-pin SOIC package. The SP3070EEN-L/TR is a same-package interface-transceiver candidate identified in the cross-reference results, but its timing, logic levels, protection, and pin functions must be checked against the MAX3070E datasheet before it is treated as interchangeable.
When should I choose the MAX3070EASD+T over the ISL83070EIBZA-T?
Choose the MAX3070EASD+T when its documented combination of 3.3 V operation, one driver, one receiver, ±15 kV ESD protection, fail-safe behavior, and hot-swap support matches the interface requirements. Consider the ISL83070EIBZA-T only after confirming its pin functions, supply compatibility, propagation timing, receiver behavior, and protection specifications. A similar package alone does not establish functional interchangeability.
Where can I buy MAX3070EASD+T and check its price?
Use the Request a Quote form on this page to request MAX3070EASD+T pricing, availability, current lead time, and order quantity. The form allows procurement teams to obtain transaction-specific terms without relying on static price tables that may quickly become outdated. The exact reel quantity and any required multiples can be confirmed during the quotation process.
Is MAX3070EASD+T in stock and what is its lead time?
Current MAX3070EASD+T stock and lead time should be requested through the Request a Quote form on this page. Availability can vary with reel quantity, production schedules, and date code requirements. Provide the required quantity, date-code preference, and target delivery location so procurement can confirm the most relevant supply information.
What are the main electrical differences between MAX3070EASD+T and MAX3071EASD?
The MAX3070EASD+T provides one driver and one receiver, while the MAX3071E belongs to the same 14-pin MAX3070E-MAX3079E family and adds receiver-channel capability. That change increases the difference by one receiver channel and may alter the internal pin allocation. Treat the MAX3071E as a family candidate rather than an automatic drop-in unless its pin-description table confirms direct interchangeability.
Does the MAX3070EASD+T support both RS-485 and RS-422?
The MAX3070EASD+T supports both RS-485 and RS-422 through its one-driver and one-receiver interface. The manufacturer describes the MAX3070E-MAX3079E devices as RS-485/RS-422 transceivers with one driver and one receiver. The electrical topology, termination, and enable arrangement still determine whether an installed link operates in an RS-485 multidrop bus or an RS-422 connection.

Dữ liệu tham khảo kỹ thuật cho MAX3070EASD+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MAX3070EASD+T for a 3.3 V RS-485 or RS-422 interface that requires one driver, one receiver, ±15 kV ESD protection, fail-safe behavior, and hot-swap capability. The MAX3071EASD, MAX3072EASD, and MAX3073EASD are same-family 14-pin SOIC choices when an additional receiver channel is useful, but their revised pin allocation must be checked before treating them as direct replacements. SP3070EEN-L/TR and ISL83070EIBZA-T are cross-brand 14-pin candidates; consider them only after comparing supply voltage, logic levels, timing, receiver enable behavior, ESD rating, and bus-side pin functions. For a conventional one-driver, one-receiver node, the MAX3070EASD+T offers the most direct family configuration. For a point-to-point link needing multiple receive inputs, a MAX3071E-series device may simplify the receiver side. Final approval should follow schematic, timing, absolute-maximum-rating, and lifecycle reviews using each candidate's manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX3071EASD MAX3072EASD MAX3073EASD SP3070EEN-L/TR ISL83070EIBZA-T
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Suntek Technology Renesas Electronics
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Supported Interfaces RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 RS-485

Bảo phân biệt quan trọng

  • Single-transceiver integration with protected differential I/O (vsSP3070EEN-L/TR)
  • Defined receiver state under open and shorted inputs (vsISL83070EIBZA-T)
  • Lower receiver-channel count supports a simpler point-to-point interface (vsMAX3071EASD)
  • Same-family option preserves the established MAX3070E feature set (vsMAX3072EASD)

Ghi chú thiết kế

Place the MAX3070EASD+T near the external communication connector and route the RS-485/RS-422 pair as a tightly coupled differential pair. Keep the bus traces away from switching nodes, high-current paths, and antenna-like structures. Connect the transceiver ground reference according to the complete interface design, and verify the conductor-to-ground arrangement with the manufacturer data sheet because incorrect shield or ground termination can increase surge currents.

Do not assume that identical package dimensions guarantee a functional drop-in replacement. Check pin names, driver-enable behavior, receiver enable polarity, bus-idle levels, propagation delay, and maximum data rate before substituting MAX3071EASD, MAX3072EASD, MAX3073EASD, SP3070EEN-L/TR, or ISL83070EIBZA-T. The family variants add receiver channels, which can change internal pin allocation even though they use the same 14-pin SOIC outline.

Decouple the 3.3 V transceiver supply close to the device with the capacitance recommended in the MAX3070E-MAX3079E manufacturer data sheet. Keep the supply and ground return path short, and account for transceiver current in the upstream regulator's capacity. If the interface board also contains switching converters, isolate their high-current routing from the receiver input and use the fail-safe receiver to define the state of an inactive bus.

Termination, common-mode biasing, and protection components must be designed for the actual cable length, baud rate, topology, and grounding method. A single termination at each physical end of a long multidrop bus can reduce reflections, while bias resistors must not be duplicated excessively because that can overdrive the bus. Validate the complete network with the longest cable and the specified node count rather than relying only on bench-length cables.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit compliance declarations were included in the available manufacturer and distributor information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Analog Devices before production release.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX3070EASD+T MAX3070EASD+T datasheet MAX3070EASD+T datasheet pdf MAX3070EASD+T pinout Maxim MAX3070EASD+T MAX3070EASD+T equivalent MAX3070EASD+T replacement MAX3070EASD+T cross reference MAX3070EASD+T vs MAX3071EASD MAX3070EASD+T SOIC-14 MAX3070EASD+T RS-485 transceiver MAX3070EASD+T industrial network MAX3070EASD+T price MAX3070EASD+T stock

Các bộ phận và thuật ngữ liên quan

Maxim Integrated Analog Devices MAX3070EASD+T MAX3071EASD MAX3072EASD MAX3073EASD SP3070EEN-L/TR ISL83070EIBZA-T RS-485 RS-422 interface transceiver digital transceiver differential bus semi-duplex communication ESD protection fail-safe receiver hot-swap balanced differential signaling SOIC-14 14-pin SOIC surface-mount package industrial communication building control data acquisition
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ