MC33912G5ACR2 vs MC34912G5ACR2 So sánh

So sánh chi tiết song song của MC33912G5ACR2 bằng NXP Semiconductors và MC34912G5ACR2 bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MC33912G5ACR2 MC33912G5ACR2 - LIN SBC, 2x LDO, DC Motor Predriver | NXP

MC33912G5ACR2 - LIN SBC, 2x LDO, DC Motor Predriver | NXP

MC33912G5ACR2 ✓ Hoạt động
NXP Semiconductors
MC34912G5ACR2 MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP

MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP

MC34912G5ACR2 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MC33912G5ACR2 MC34912G5ACR2
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Power MOSFET Drivers Power Management
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng LIN System Basis Chip with DC Motor Pre-driver and Current Sense System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense
Supply Voltage Range 5.5 V to 27 V (serial comm. 5.5 V to 18 V) —
Typical Supply Current 4.5 mA —
Nhiệt độ hoạt động -40 °C to +125 °C -40 C to +85 C (industrial)
LDO Regulator 1 (V1) Output 5.0 V, 60 mA continuous / 200 mA peak —
LDO Regulator 2 (V2) Output 5.0 V, 20 mA continuous / 200 mA peak —
LIN Transceiver Standard LIN 2.0 / 2.1 / SAE J2602 —
LIN ESD (IEC 61000-4-2 contact) ±6.0 kV minimum —
Motor Pre-driver Current Up to 1.0 A (high-side / low-side) —
Current Sense Amplifier Differential Isense H/L inputs with selectable gain —
SPI Interface 32-bit, up to 4 MHz —
Hộp 32-LQFP (7x7 mm) 32-pin LQFP (7 mm x 7 mm)
Kiểu lắp đặt Surface Mount Surface Mount (Gull Wing)
Packaging Tape & Reel (TR) —
Cấp MSL [DATA_NEEDED: MSL level] [DATA_NEEDED: MSL level]
Trạng thái RoHS Compliant (Pb-free) Compliant
Interface / Protocol — SPI control + LIN 2.0/2.1/2.2 / J2602
Supply Voltage (VBAT) — 5.5 V to 18 V (max 27 V transient)
On-board LDOs — 2 x 5.0 V regulators, up to 200 mA each
Motor Predriver — Low-side N-channel predriver with current sense (0.11 A output current capability)
Wake-up Inputs — 4 wake pins (L1-L4) + cyclic sense + forced wake
Operating Modes — Normal, Stop, Sleep, Cyclic Sense
Analog MUX (AMUX) — Selectable battery / temperature / pin voltage monitor to MCU ADC
Lead-Free / Halogen-Free — [DATA_NEEDED: lead-free/halogen-free confirmation]
Terminal Form — GULL WING (LQFP)
Package Code — LQFP-32

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá