PCA9555DB vs PCA9564D So sánh

So sánh chi tiết song song của PCA9555DB bằng NXP Semiconductors và PCA9564D bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
PCA9555DB PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB ✓ Hoạt động
NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số PCA9555DB PCA9564D
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type 16-bit I2C/SMBus GPIO expander with interrupt —
GPIO Count 16 bits —
Operating Voltage Range 2.3 V to 5.5 V —
I2C Maximum Frequency 400 kHz —
I2C/SMBus Interface Two-wire serial interface —
I/O Port Configuration Input or output per bit —
I/O Port Tolerance 5 V tolerant —
Interrupt Output Active-low, open-drain —
Standby Current 1 uA maximum —
Package Type SSOP-24 SOIC-20
Package Pitch 1.0 mm —
Kiểu lắp đặt Surface mount Surface mount
Device Pin Count 24 pins —
Serial Addressing Seven-bit I2C address; [DATA_NEEDED: address table] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Controller Type — Parallel bus to I2C bus controller
Parallel Interface — 8-bit parallel bus
Serial Interface — I2C bus
Supply Voltage Range — 2.3 V to 3.6 V
Nominal Supply Voltage — 2.5 V or 3.3 V
Điện áp cung cấp — 6 mA
Maximum I2C Bus Frequency — 400 kHz
Hộp — 20-pin SO, 7.50 mm width
Số lượng chân — 20
I2C Address Configuration — [DATA_NEEDED: programmable I2C address range and configuration method]
Parallel Data Width — 8 bits
I2C Addressing — [DATA_NEEDED: supported addressing modes]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá