PCA9555DB vs PCA9564D 比較

詳細並排比較 PCA9555DB 由 NXP Semiconductors 與 PCA9564D 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
PCA9555DB PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB ✓ 啟用中
NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ 啟用中

規格比較

參數 PCA9555DB PCA9564D
品牌 NXP Semiconductors NXP Semiconductors
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Device Type 16-bit I2C/SMBus GPIO expander with interrupt —
GPIO Count 16 bits —
Operating Voltage Range 2.3 V to 5.5 V —
I2C Maximum Frequency 400 kHz —
I2C/SMBus Interface Two-wire serial interface —
I/O Port Configuration Input or output per bit —
I/O Port Tolerance 5 V tolerant —
Interrupt Output Active-low, open-drain —
Standby Current 1 uA maximum —
Package Type SSOP-24 SOIC-20
Package Pitch 1.0 mm —
安裝類型 Surface mount Surface mount
Device Pin Count 24 pins —
Serial Addressing Seven-bit I2C address; [DATA_NEEDED: address table] —
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS 狀態 unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Controller Type — Parallel bus to I2C bus controller
Parallel Interface — 8-bit parallel bus
Serial Interface — I2C bus
Supply Voltage Range — 2.3 V to 3.6 V
Nominal Supply Voltage — 2.5 V or 3.3 V
供應電流 — 6 mA
Maximum I2C Bus Frequency — 400 kHz
封裝 — 20-pin SO, 7.50 mm width
腳位數 — 20
I2C Address Configuration — [DATA_NEEDED: programmable I2C address range and configuration method]
Parallel Data Width — 8 bits
I2C Addressing — [DATA_NEEDED: supported addressing modes]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價