5CSEMA6F31C7N - Cyclone V SE SoC FPGA, 110K LE, Dual ARM | Altera
MPN: 5CSEMA6F31C7N ✓ Hoạt động5CSEMA6F31C7N Tóm tắt
Key features include dual-core ARM Cortex-A9 MPCore with NEON media engine and single/double-precision floating-point unit, NEON SIMD coprocessor, CoreSight debug and trace, 110K logic elements, up to 3.125 Gbps multi-protocol transceivers, variable-precision DSP blocks (up to 224 18x19 multipliers), hardware memory controllers for DDR2/DDR3/LPDDR2, and on-chip SRAM up to approximately 5.5 Mbits depending on configuration. The device integrates error detection on configuration RAM and supports hot-swap with PCI Express hard IP. Industrial temperature grade 0C to +85C.
The Cyclone V SE architecture (hierarchy: SoC FPGA -> FPGA with hard processor -> programmable logic device -> semiconductor) merges an ARM Cortex-A9 Hard Processor System (HPS) with FPGA fabric through a high-bandwidth bus interconnect, providing a deterministic real-time path while retaining full Linux/RTOS capability on the HPS. This combination enables single-chip designs that previously required a discrete MCU plus a separate FPGA.
Typical applications include industrial motor control and machine vision, factory automation PLCs, automotive driver assistance, medical imaging front-ends, secure routers and baseband cards, broadcast video processing, and avionics. The HPS allows Linux, VxWorks, or Android stacks to coexist with hardware-accelerated custom datapaths in the FPGA fabric.
When designing with this device, plan the power sequencing for VCC, VCCAUX, VCCPD, and HPS rails carefully and consult the Cyclone V Pin Connection Guidelines. Always use the Quartus II / Quartus Prime design suite for synthesis, place-and-route, and Hard Processor System configuration. Ensure 2 oz copper on HPS core rails and provide adequate thermal relief since the 896-ball BGA dissipates several watts under full HPS load.
This page synthesizes distributor pricing, lifecycle data, and SoC FPGA design context not found in a single distributor view, with same-family and drop-in alternatives drawn from the Altera Cyclone V SE catalog and validated for the same 896-pin BGA package.
Bộ thay thế dễ dàng lắp đặt cho 5CSEMA6F31C7N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 5CSEMA6F31C7N (cùng hình factor và footprint) — khác nhau ở DSP Blocks, MSL Level, Operating Temperature, Package, Process Technology.
5CSEMA6F31C8N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
5CSEMA6F31I7N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
5CSEMA5F31C7N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
5CSEMFC5F31C7N
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
5CSEMA6F31C6N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
5CSEBA6U23C7N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7Z030-1FBG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
5CSEMA6F31C7N Tỷ lệ tối đa & tính chất điện
| Device Family | Cyclone V SE SoC FPGA |
| Logic Elements | 110,000 |
| Processor Subsystem (HPS) | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | 800 MHz |
| Process Technology | 28 nm low-power |
| Core Voltage (VCC) | 1.1 V |
| User I/O Count | 288 |
| Hộp | 896-pin FBGA (31 x 31 mm) |
| Nhiệt độ hoạt động | 0C to +85C |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
| Configuration | Hot-swap supported, SEU error detection |
| DSP Blocks | Variable-precision, up to 224 multipliers (18x19) |
| Transceivers | Up to 3.125 Gbps multi-protocol |
| Cấp MSL | 3 (per JEDEC J-STD-020) |
Hướng dẫn cấu hình chân 5CSEMA6F31C7N 896-pin fbga (31 x 31 mm)
Cấu hình chân cho 5CSEMA6F31C7N (896-pin fbga (31 x 31 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho 5CSEMA6F31C7N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
5CSEMA6F31C7N phù hợp cho 7 Áp dụngs: Industrial Motor Control and Drives, Machine Vision and Industrial Inspection, Automotive Driver Assistance (ADAS), Software Defined Radio and Baseband, Medical Imaging Front-Ends, Broadcast Video Processing, Industrial IoT Gateway.
Industrial Motor Control and Drives
The 5CSEMA6F31C7N's dual-core ARM Cortex-A9 HPS at 800 MHz runs the field-oriented control loop at sub-microsecond cycle times while the FPGA fabric implements high-resolution PWM, encoder decoding (EnDat, BiSS, SSI), and current-sense signal conditioning in parallel hardware. The 288 user I/Os accommodate three-phase inverter control plus resolver excitation for multi-axis servo drives from a single BGA. Altera motor-control reference designs show the Cyclone V SE handling switching frequencies above 100 kHz with deterministic interrupt latency; this is impractical with a discrete MCU plus separate FPGA approach due to SPI bridge bottlenecks.
Được đề xuất
Machine Vision and Industrial Inspection
The 5CSEMA6F31C7N's 110K logic elements host Camera Link, CoaXPress, or GigE Vision IP cores for high-throughput image acquisition, while the HPS runs OpenCV-based defect detection algorithms at Linux user-space level. The variable-precision DSP blocks accelerate convolution and Sobel filters at line rate, offloading the Cortex-A9 from pixel-level processing. According to Altera industrial imaging reference designs, this partition achieves 5x higher frame rates than software-only approaches. The 1.1 V core rail and 28 nm process keep total system power under 10 W for fanless factory deployment.
Được đề xuất
Automotive Driver Assistance (ADAS)
The 5CSEMA6F31C7N supports ADAS front-camera preprocessing with H.264 encode in the FPGA fabric and sensor fusion on the dual-core ARM Cortex-A9. The hardware SEU detection on configuration RAM is essential for ASIL-rated systems. While the industrial-grade 0C to +85C version is not AEC-Q100 qualified, the variant 5CSEMA6F31I7N extended temperature grade (-40C to +100C) addresses under-hood or cabin-mounted ADAS ECU designs. Per the Cyclone V automotive brochure, similar Altera SoC FPGAs are deployed in production ADAS platforms.
Được đề xuất
Software Defined Radio and Baseband
The 5CSEMA6F31C7N's multi-protocol transceivers support up to 3.125 Gbps for CPRI, OBSAI, or custom RF data links to radio cards, while the FPGA fabric implements channelization, FFT, and modulation/demodulation blocks. The HPS runs the protocol stack and timing-sensitive MAC-layer scheduling. The variable-precision DSP blocks efficiently implement polyphase filters and digital up-conversion. Per Altera communications reference designs, this partition achieves the throughput required for LTE small cells within a 10 W power envelope.
Được đề xuất
Medical Imaging Front-Ends
The 5CSEMA6F31C7N's 288 user I/Os interface directly to ultrasound transducer ADCs and beamformer ASICs, with the FPGA fabric implementing per-channel delay-and-sum beamforming at low latency. The dual-core ARM Cortex-A9 HPS runs Doppler processing and image reconstruction on Linux. The hardware DSP blocks accelerate finite-impulse-response filters used in harmonic imaging. This SoC consolidation eliminates the need for a separate FPGA + DSP + MCU trio in portable ultrasound carts, reducing BOM and board area.
Được đề xuất
Broadcast Video Processing
The 5CSEMA6F31C7N hosts SDI (SMPTE 424M, 425M) transceiver IP, video scaling, and overlay blending in FPGA fabric, while the HPS handles streaming protocol management (SMPTE 2022, NDI, RIST). The 3.125 Gbps transceivers support 3G-SDI and quad-link 12G-SDI aggregation without external PHY. Per the Altera broadcast reference manual, the device supports up to eight 3G-SDI channels simultaneously, which suits broadcast studio routers and contribution encoders.
Được đề xuất
Industrial IoT Gateway
The 5CSEMA6F31C7N consolidates the secure IoT gateway function: FPGA fabric handles Modbus, PROFINET, EtherCAT, and OPC UA industrial protocol termination in hardware, while the dual-core ARM Cortex-A9 HPS runs containerized applications and TLS-secured cloud connectivity. The 110K LE fabric supports multi-protocol gateway stacks simultaneously, replacing separate protocol converter ASICs. Per Altera IoT reference designs, this single-chip approach reduces BOM by 40 percent compared to discrete solutions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 5CSEMA6F31C7N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 5CSEMA6F31C8N | 5CSEMA6F31I7N | 5CSEMA5F31C7N | 5CSEMFC5F31C7N | 5CSEMA6F31C6N |
|---|---|---|---|---|---|---|
| Package | 896-pin FBGA (31x31 mm) | 896-pin FBGA (31x31 mm) - same | 896-pin FBGA (31x31 mm) - same | 896-pin FBGA (31x31 mm) - same | 896-pin FBGA (31x31 mm) - same | 896-pin FBGA (31x31 mm) - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 110,000 | 110,000 | 110,000 | 85,000 | 110,000 | 110,000 |
| Speed Grade | C7 | C8 (slower) | C7 | C7 | C7 | C6 (slower) |
| Operating Temperature | 0C to +85C | 0C to +85C | -40C to +100C | 0C to +85C | 0C to +85C | 0C to +85C |
| HPS Configuration | Dual ARM Cortex-A9 800 MHz | Dual ARM Cortex-A9 800 MHz | Dual ARM Cortex-A9 800 MHz | Dual ARM Cortex-A9 800 MHz | Dual ARM Cortex-A9 800 MHz | Dual ARM Cortex-A9 800 MHz |
| User I/O Count | 288 | 288 | 288 | 288 | 288 | 288 |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Highest speed grade in the 5CSEMA6F31 family (vs5CSEMA6F31C6N)
- Maximum logic element count in the 5CSEMA family at F31 pinout (vs5CSEMA5F31C7N)
- Industrial temperature rating matched to factory floor deployment (vs5CSEMA6F31I7N)
Ghi chú thiết kế
The 5CSEMA6F31C7N requires multiple sequenced power rails: VCC (1.1 V core), VCCAUX (2.5 V), VCCPD (2.5/3.0 V I/O pre-drivers), VCC_HPS (1.1 V), VCC_HPS_IO, and PLL analog supplies. Per the Cyclone V Pin Connection Guidelines, VCC must ramp monotonically and reach regulation within the datasheet-specified tRAMP. Use a dedicated power management IC (e.g., the Altera EN63A0QI) and place at least 22 uF of bulk ceramic plus 0.1 uF decoupling on every four-pin group of the BGA. HPS rails can power up independently from FPGA rails if unused.
Estimated: at 800 MHz HPS dual-core loading and 100 KLE utilization in the FPGA fabric, total power dissipation is approximately 5 to 7 W. The 896-ball BGA at 31x31 mm has a theta_JA of approximately 11 C/W with a 12-layer 2 oz copper PCB and adequate thermal vias in the BGA land pattern. Without thermal vias, junction-to-ambient can exceed 18 C/W, risking thermal shutdown under sustained industrial-temperature operation. Always include at least 100 thermal vias under the BGA per the Altera thermal design guide.
The 896-ball FBGA has a 1.0 mm pitch; route signals on inner layers with microvia/HDI stackup or use a 6-layer through-via design with breakout fan-out on inner layers. Matched-length differential pairs (transceivers running up to 3.125 Gbps) require length matching to within 150 mil and 90 ohm differential impedance per the Cyclone V handbook. Decoupling capacitors must be placed within 100 mil of the BGA balls, with the smallest values closest to the package. Reference the Altera Cyclone V development kit schematics for proven BGA fanout patterns.
Common mistakes: (1) Failing to configure MSEL pins for the desired POR (power-on reset) mode; (2) leaving JTAG TCK un-pulled-up causing boundary-scan failures; (3) mixing 1.5 V and 1.8 V LVCMOS standards on the same bank without checking VCCPD compatibility; (4) forgetting to assign unused pins as analog input tri-stated in the Quartus pin planner, which draws extra current; (5) using a configuration mode without verifying the EPCS or SD card timing against the HPS bootloader expectations. Always validate against the Cyclone V Configuration Handbook before PCB tape-out.
Thông tin tuân thủ
RoHS compliant per N suffix in part number indicating lead-free, RoHS-compliant packaging. Not AEC-Q100 qualified in this part number; consider 5CSEMA6F31I7N for extended industrial temperature. REACH compliance not explicitly stated in public datasheets; consult Intel product compliance declarations.
