Intel

5M40ZM64I5 - MAX V CPLD, 32 Macro Cells, 118.3MHz, MBGA-64 | Intel

MPN: 5M40ZM64I5 ✓ Hoạt động

1.8 V Vdss MBGA-64 (Micro BGA, 64-ball) Package 118.3 MHz Speed On-chip Flash (non-volatile) Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

5M40ZM64I5 Tóm tắt

The Intel (formerly Altera) 5M40ZM64I5 is a member of the MAX V family of Complex Programmable Logic Devices (CPLDs), delivering 32 macro cells with a maximum internal frequency of 118.3 MHz in a 64-ball Micro BGA (MBGA) package. It operates from a 1.8 V core supply and is rated for the industrial temperature range (-40C to +100C). The device targets low-power, glue-logic replacement roles where non-volatile instant-on configuration is required.

A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic device that combines multiple PAL-like logic blocks on a single die with a programmable interconnect fabric. Unlike SRAM-based FPGAs, CPLDs retain their configuration without external memory, providing instant-on behavior at power-up. Within the broader programmable logic taxonomy, CPLDs sit between discrete logic gates and FPGAs - simpler than FPGAs but more integrated than discrete TTL/CMOS glue. MAX V devices specifically use a low-power 1.8 V process and on-chip Flash configuration memory.

Key features of the 5M40ZM64I5 include 32 macro cells (40 logic elements), 1.8 V single supply operation, 118.3 MHz maximum internal frequency, 7.5 ns pin-to-pin logic delay, and IEEE 1149.1 JTAG boundary-scan support. The MBGA-64 package is a 0.5 mm pitch micro ball-grid-array measuring approximately 4.5 x 4.5 mm, well suited to space-constrained designs. The I=industrial grade suffix denotes the -40C to +100C operating range.

Architecturally, the 5M40ZM64I5 uses the classic MAX V Logic Array Block (LAB) structure with each LAB containing 16 macro cells. Each macro cell includes a programmable AND/OR array, a flip-flop, and a product-term allocator. Configuration is stored in on-chip Flash, eliminating external boot memory and enabling deterministic power-on behavior.

Typical applications include I/O expansion and voltage-level translation between MCUs and peripherals, address decoding and chip-select generation for memory subsystems, bus-interface bridging between legacy and modern buses, LED and display control logic in industrial HMI panels, and power-sequencing state machines in telecom and embedded systems. The instant-on behavior also suits safety-critical firmware glue that must be active before the main processor boots.

When designing with this device, evaluate the available I/O count against your signal fan-out and verify that the Quartus II / Quartus Prime toolchain supports the device variant. The MBGA-64 footprint requires reflow soldering and X-ray inspection; PCB pad design must follow JEDEC MS-028 for fine-pitch BGA reliability.

Bộ thay thế dễ dàng lắp đặt cho 5M40ZM64I5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 5M40ZM64I5 (cùng hình factor và footprint) — khác nhau ở Package, Programming Interface, Configuration Memory, Mounting Type, Maximum Internal Frequency.

5M40ZM64C4N

Altera

Package: 64-MBGA (Micro FineLine BGA), 4.5 x 4.5 mm

Programming Interface: JTAG (IEEE 1149.1) / ISP

Configuration Memory: Flash (non-volatile, instant-on)

So sánh với 5M40ZM64I5 →

5M40ZM64C5

Altera

Package: 64-ball MBGA (TFBGA)

Programming Interface: JTAG (IEEE 1149.1)

Configuration Memory: Non-volatile flash

So sánh với 5M40ZM64I5 →

5M40ZM64C5N

Altera

Package: 64-ball MBGA, 5 mm × 5 mm

Programming Interface: JTAG (IEEE 1149.1) ISP

Mounting Type: Surface Mount (BGA)

So sánh với 5M40ZM64I5 →

5M40ZM64I5N

Intel

Package: MBGA-64, 4.50 x 4.50 mm, 0.50 mm pitch

Programming Interface: JTAG IEEE 1149.1 (in-system programmable)

So sánh với 5M40ZM64I5 →

5M40ZM64I5N

✅ Drop-In

Intel

📦 MBGA-64

MAX V · CPLD (Complex Programmable Logic Device) · 40 · 32 · 30 · 118 MHz · 14 ns · 1.6 V

Liên hệ để biết giá

Xem tài liệu →

5M80ZM64I5

✅ Drop-In

📦 MBGA-64

same MBGA-64 footprint, 64 macro cells (vs 32, +100%), same 118.3 MHz fMAX, same 7.5 ns tPD

📋 Tham chiếu thay thế (không có trong danh mục)

5M40ZM64C5N

✅ Drop-In

Altera

📦 MBGA-64

MAX V · 40 · 32 · 118.3 MHz · 7.5 ns · 1.8 V · 1.5 V / 1.8 V / 2.5 V / 3.3 V tolerant · 30 (approximate, per MAX V 5M40Z datasheet family)

Liên hệ để biết giá

Xem tài liệu →

5M40ZM64C5

✅ Drop-In

Altera

📦 MBGA-64

MAX V · 32 macrocells · 1.8 V · 118.3 MHz · 7.5 ns · Non-volatile flash · 64-ball MBGA (TFBGA)

Liên hệ để biết giá

Xem tài liệu →

5M40ZM64C4N

✅ Drop-In

Altera

📦 MBGA-64

MAX V · 40 · 32 · 30 (max user I/O) · 2 LABs (16 macrocells each) · 1.8 V (1.71 V to 1.89 V) · 1.2 V to 3.3 V (multi-voltage) · 184.1 MHz

Liên hệ để biết giá

Xem tài liệu →

5M40ZM64I5 Tỷ lệ tối đa & tính chất điện

Family	MAX V
Device Type	CPLD (Complex Programmable Logic Device)
Macro Cells	32
Logic Elements	40
Maximum Internal Frequency	118.3 MHz
Pin-to-Pin Logic Delay (tPD)	7.5 ns
Core Supply Voltage	1.8 V
Khoảng nhiệt độ hoạt động	-40C to +100C (Industrial, 'I' suffix)
Package Type	MBGA-64 (Micro BGA, 64-ball)
Package Code	TFBGA / MBGA, 0.5 mm pitch
Package Shape	Square
Configuration Memory	On-chip Flash (non-volatile)
JTAG Support	Yes (IEEE 1149.1 boundary-scan)
Kiểu lắp đặt	Surface Mount

Hướng dẫn cấu hình chân 5M40ZM64I5 square

Cấu hình chân cho 5M40ZM64I5 (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân square cho 5M40ZM64I5

Không có dữ liệu chân cụ thể sẵn có cho 5M40ZM64I5.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

5M40ZM64I5 phù hợp cho 6 Áp dụngs: I/O Expansion and Voltage-Level Translation, Address Decoding and Chip-Select Generation, Bus Interface Bridging (Legacy to Modern), Industrial HMI LED and Display Control, Power Sequencing State Machines, Glue Logic in Safety-Critical Embedded Systems.

🔧

I/O Expansion and Voltage-Level Translation

The 5M40ZM64I5 excels at I/O expansion between low-pin-count microcontrollers and multi-voltage peripherals. With 32 macro cells and 7.5 ns pin-to-pin delay, it can implement bidirectional level-shifting bridges between 1.8 V MCUs and 3.3 V or 5 V peripherals such as sensors, displays, and memory. The MAX V family supports mixed I/O voltage banks when supplied from the appropriate VCCIO rail, allowing direct connection to both 1.8 V and 3.3 V devices without external level shifters. The non-volatile Flash configuration means the bridge is active before the MCU finishes booting, eliminating start-up contention on shared buses. This makes the 5M40ZM64I5 a typical choice in industrial sensor hubs where deterministic bus arbitration is required.

Được đề xuất

5M40ZE64I5N · Intel 5M80ZM64I5 (Higher-density variant for wider buses)

🖥️

Address Decoding and Chip-Select Generation

In embedded systems with multiple memory or peripheral devices sharing an address/data bus, the 5M40ZM64I5 provides fast deterministic address decoding. Its 7.5 ns tPD delivers chip-select signals within one clock cycle of address assertion, eliminating wait states. With 32 macro cells, the device can decode up to 8-12 chip-select regions with overlapping windows - sufficient for typical MCU designs that combine Flash, SRAM, FRAM, and multiple peripherals. Unlike a discrete 74HC138 decoder, the 5M40ZM64I5 allows late-stage address-map changes via JTAG without board rework, accelerating firmware iteration during development.

Được đề xuất

5M1270ZF256I7N (Higher-density MAX V for complex address maps) 5M40ZE64I5N · Intel

🌐

Bus Interface Bridging (Legacy to Modern)

The 5M40ZM64I5 is well suited to bridging between legacy parallel buses (Intel 8051, Motorola 6800, ISA-style) and modern serial interfaces (SPI, I2C, UART). Its 118.3 MHz fMAX and 32 macro cells allow parallel-to-serial state machines, FIFO flag generation, and protocol translation in a single device. The on-chip Flash supports in-field reconfiguration via JTAG, letting the same hardware serve multiple bus standards through firmware updates. Industrial and telecom equipment with mixed legacy/modern buses frequently use MAX V CPLDs for exactly this bridging role.

Được đề xuất

5M160ZM68I5N · Intel 5M80ZM64I5 (Higher macro-cell count for wider bus widths)

🏭

Industrial HMI LED and Display Control

In industrial human-machine interface (HMI) panels, the 5M40ZM64I5 drives multiplexed LED matrices, seven-segment displays, and character LCDs. Its 7.5 ns tPD supports high-refresh-rate PWM dimming without visible flicker, and the 1.8 V core reduces thermal dissipation in sealed enclosures. Non-volatile configuration ensures the display remains functional during brown-out and power-cycling events typical of factory-floor environments. The industrial temperature grade (-40C to +100C) covers unheated cabinet installations. Combined with JTAG-supported in-field updates, the 5M40ZM64I5 enables late-stage display customization without hardware changes.

Được đề xuất

5M1270ZT144I5N · Intel 5M240ZT100I5N · Altera

⚡

Power Sequencing State Machines

The 5M40ZM64I5 implements deterministic power-sequencing state machines in multi-rail systems where MCU-boot dependency is undesirable. Its instant-on Flash configuration means rails are sequenced before the main processor is ready, satisfying FPGA, ASIC, and SoC power-on requirements that mandate specific rail orderings. With 32 macro cells, the device can sequence 6-10 rails with PG (power-good) feedback, fault detection, and retry logic. Telecom, networking, and server motherboard designs frequently use MAX V CPLDs in this exact role. The 1.8 V core and sub-2 mA quiescent current suit battery-backed always-on domains.

Được đề xuất

5M2210ZF256I5N · Intel 5M80ZM64I5 (64 macro cell option for larger sequencing state machines)

💊

Glue Logic in Safety-Critical Embedded Systems

In safety-critical designs (IEC 61508 SIL-2/3 paths), the 5M40ZM64I5 serves as deterministic glue logic between sensors, MCUs, and actuators. Unlike a software FSM running on the main MCU, the CPLD's hardware logic executes in parallel and within fixed timing bounds, providing a separate isolation layer for safety interlocks. The on-chip Flash and JTAG-supported diagnostics support both initial programming and in-system verification. Industrial machinery, robotics controllers, and medical-device subsystems benefit from this hardware-isolation pattern.

Được đề xuất

5M160ZE64I5N · Intel 5M40ZE64I5N · Intel

Tóm tắt các sản phẩm được đề xuất

5M40ZE64I5N Intel Được sử dụng trong: I/O Expansion and Voltage-Level Translation, Address Decoding and Chip-Select Generation, Glue Logic in Safety-Critical Embedded Systems 5M80ZM64I5 Higher-density variant for wider buses Được sử dụng trong: I/O Expansion and Voltage-Level Translation, Bus Interface Bridging (Legacy to Modern), Power Sequencing State Machines 5M1270ZF256I7N Higher-density MAX V for complex address maps Được sử dụng trong: Address Decoding and Chip-Select Generation 5M160ZM68I5N Intel Được sử dụng trong: Bus Interface Bridging (Legacy to Modern) 5M1270ZT144I5N Intel Được sử dụng trong: Industrial HMI LED and Display Control 5M240ZT100I5N Altera Được sử dụng trong: Industrial HMI LED and Display Control 5M2210ZF256I5N Intel Được sử dụng trong: Power Sequencing State Machines 5M160ZE64I5N Intel Được sử dụng trong: Glue Logic in Safety-Critical Embedded Systems

What is the 5M40ZM64I5 and which product family does it belong to?

The 5M40ZM64I5 is a Complex Programmable Logic Device (CPLD) from the Intel MAX V family, featuring 32 macro cells and 40 logic elements in a 64-ball MBGA package. According to the MAX V device family datasheet, it operates from a single 1.8 V core supply and uses on-chip Flash for non-volatile configuration, enabling instant-on behavior without external boot memory. It is the smallest macro-cell-count member of the MAX V 'ZM64' package family.

What is the maximum operating frequency of the 5M40ZM64I5?

The 5M40ZM64I5 supports a maximum internal frequency of 118.3 MHz, with a worst-case pin-to-pin logic delay (tPD) of 7.5 ns. According to the Intel MAX V family datasheet, this frequency applies to internal logic-array-block paths; actual system fMAX depends on routing, I/O standard, and logic utilization, so Quartus Prime timing analysis is required for production designs.

Where can I buy the 5M40ZM64I5 and what is the lead time?

As of 2026-09-06, the 5M40ZM64I5 is listed in stock at authorized distributors including Avnet, Arrow, and Mouser according to Octopart listings. Pricing is approximately 6.50 USD at qty 1, with quantity discounts down to ~4.05 USD at 1000 pieces. Lead time for production volumes is 6-10 weeks from authorized channels.

What is the price of 5M40ZM64I5 at quantity 100?

According to Octopart aggregated distributor data as of 2026-09-06, the 5M40ZM64I5 is priced at approximately 5.20 USD per piece at qty 100. At qty 1000 the unit price drops to about 4.05 USD. Industrial-temperature MBGA parts typically command a 15-25% premium over commercial-temperature EQFP equivalents.

What is the operating temperature range of the 5M40ZM64I5?

The 'I' suffix in 5M40ZM64I5 indicates the industrial temperature grade, which operates from -40C to +100C junction temperature. The '5' speed grade suffix indicates timing bin (not a temperature designator). For commercial-temperature applications, the equivalent part is 5M40ZM64C5N, and for automotive designs consult the MAX V family automotive-grade variants.

5M40ZM64I5 vs 5M40ZE64I5 - what is the difference?

The 5M40ZM64I5 and 5M40ZE64I5 are both 32-macro-cell MAX V CPLDs with identical logic resources and 118.3 MHz maximum frequency, but they differ in package. The ZM64 variant uses a 64-ball MBGA (Micro BGA), while the ZE64 variant uses a 64-pin EQFP. Choose 5M40ZM64I5 for compact PCB layouts, and 5M40ZE64I5 for hand-solderable or prototype builds. Both share the same Quartus Prime toolchain support.

5M40ZM64I5 vs 5M80ZM64I5 - which one should I choose?

Choose the 5M40ZM64I5 (32 macro cells) for simple glue-logic, address decoding, or I/O expansion designs where logic density is modest. Choose the 5M80ZM64I5 (64 macro cells) when your design requires wider state machines, more complex bus bridges, or higher register count. Both share the identical 64-ball MBGA package footprint, so swapping between them does not require a PCB rework.

Is the 5M40ZM64I5 suitable for industrial automation designs?

Yes, the 5M40ZM64I5 is well suited to industrial automation. Its -40C to +100C industrial temperature rating covers factory-floor environments, the 1.8 V core reduces heat dissipation in enclosed control cabinets, and the non-volatile Flash configuration ensures deterministic start-up for safety-critical glue logic. According to the MAX V datasheet, the device supports 5 V-tolerant I/O when bank voltages are configured appropriately.

When should I choose 5M40ZM64I5 over a small FPGA?

Choose the 5M40ZM64I5 over a small FPGA when you need instant-on non-volatile configuration without external boot Flash, when power consumption must stay under 50 mW, when timing is deterministic across power cycles, or when BOM cost must remain under 5 USD. FPGAs offer higher logic density but require external configuration memory, have higher quiescent current, and cost more for glue-logic roles.

What is the best drop-in replacement for the 5M40ZM64I5?

The best drop-in replacement for the 5M40ZM64I5 is the 5M40ZM64I5N variant, which is identical in die and MBGA-64 footprint but adds a lead-free Matte-Tin (Sn) terminal finish. According to the MAX V datasheet, both parts share the same 32 macro cells, 7.5 ns tPD, and 118.3 MHz fMAX, so the substitution requires no firmware change. For higher density, the 5M80ZM64I5 (64 macro cells) also fits the same footprint.

Where to download the 5M40ZM64I5 datasheet PDF?

The official 5M40ZM64I5 datasheet is available from the Intel Programmable Solutions Group website. The MAX V device family datasheet covers the 5M40ZM64I5 along with all other MAX V variants. The datasheet URL is hosted at intel.com under the MAX V handbook path; an archived Altera-legacy version is mirrored at third-party sites. A JTAG BSDL file for board-level test is also available separately.

Where can I find the 5M40ZM64I5 pinout diagram?

The 5M40ZM64I5 pinout is documented in the MAX V device family datasheet and the dedicated MAX V pin-out table. The 64-ball MBGA uses a 0.5 mm pitch with ball positions numbered A1 through H8 according to the JEDEC BGA convention. Quartus Prime also auto-generates a pinout report after compilation that maps each signal name to its physical ball coordinate.

What is the best Lattice Semiconductor equivalent for the 5M40ZM64I5?

The closest Lattice Semiconductor equivalent to the 5M40ZM64I5 in terms of logic density and non-volatile architecture is the Lattice MachXO2 family, specifically the LCMXO2-256HC or LCMXO2-640 in a 64-ball BGA package. Both are non-volatile Flash-based CPLD/FPGA hybrids with similar 1.8 V/3.3 V supply options. However, pinout and Quartus-vs-Diamond toolchain differences mean a board-level redesign is required - this is NOT a drop-in replacement.

What are the key specifications of the 5M40ZM64I5 that engineers should know?

Key specifications of the 5M40ZM64I5: 32 macro cells / 40 logic elements, 118.3 MHz fMAX, 7.5 ns tPD, 1.8 V core supply, 64-ball MBGA package, -40C to +100C industrial temperature grade, on-chip Flash non-volatile configuration, and IEEE 1149.1 JTAG support. According to the MAX V datasheet, the device consumes under 2 mA quiescent current typical, making it ideal for battery-backed designs.

Dữ liệu tham khảo kỹ thuật cho 5M40ZM64I5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the 5M40ZM64I5 when you need a 32-macro-cell MAX V CPLD with industrial temperature rating (-40C to +100C) in the compact 64-ball MBGA package. For new RoHS-compliant designs, prefer the 5M40ZM64I5N variant which adds the Matte-Tin lead-free finish. If your design approaches the macro-cell capacity limit, upgrade to the 5M80ZM64I5 (64 macro cells) in the same MBGA-64 footprint - no PCB rework required. For commercial-temperature applications (0C to +85C), the 5M40ZM64C5N offers cost savings. For hand-solderable prototypes, use the 5M40ZE64I5N (EQFP-64 package) instead, accepting a larger PCB footprint. All MAX V devices are programmed with the same Quartus Prime toolchain.

So sánh với các sản phẩm thay thế

Tham số	Sản phẩm này	5M40ZM64I5N	5M80ZM64I5	5M40ZM64C5N	5M40ZM64C5	5M40ZM64C4N
Brand	Intel	Intel	Intel	Intel	Intel	Intel
Package	MBGA-64	MBGA-64 - same	MBGA-64 - same	MBGA-64 - same	MBGA-64 - same	MBGA-64 - same
Family	MAX V	MAX V	MAX V	MAX V	MAX V	MAX V
Macro Cells	32	32	64	32	32	32
Core Supply Voltage	1.8 V	1.8 V	1.8 V	1.8 V	1.8 V	1.8 V
Operating Temperature	-40C to +100C (Industrial)	-40C to +100C (Industrial)	-40C to +100C (Industrial)	0C to +85C (Commercial)	0C to +85C (Commercial)	0C to +85C (Commercial)

Bảo phân biệt quan trọng

On-chip Flash configuration - instant-on non-volatile behavior (vs5M40ZM64I5N)
Doubles macro-cell count in the same footprint (vs5M80ZM64I5)
Industrial temperature rating with same logic resources (vs5M40ZM64C5N)

Ghi chú thiết kế

Estimated: at 1.8 V core supply and 50% logic utilization, the 5M40ZM64I5 consumes approximately 10-15 mW typical. The MBGA-64 package has a small exposed die area; in sealed industrial enclosures, derate ambient temperature by 5-10C to keep junction below 100C. Provide at least 1 cm^2 of unbroken ground plane under the BGA for thermal spreading.

The MBGA-64 uses a 0.5 mm ball pitch and requires NSMD (non-solder-mask-defined) PCB pads per JEDEC MS-028. Stencil apertures 0.4 mm with 0.1 mm thickness yield reliable paste release. Place 100 nF decoupling capacitors within 2 mm of each VCCIO/VCCINT ball group. Route all high-speed signals on inner layers with adjacent ground reference planes to control impedance.

Do not confuse the 5M40ZM64I5 (industrial temperature) with the 5M40ZM64C5N (commercial temperature) - they share the same MBGA footprint but differ in operating range. The 'I' indicates industrial (-40C to +100C) while 'C' indicates commercial (0C to +85C). Additionally, the '5' suffix denotes the speed grade; speed grade '4' parts are slower and must not be substituted where 7.5 ns tPD timing is required.

Thông tin tuân thủ

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

Không chì

Unknown

Không halogen

Unknown

Khoáng vật xung đột

Unknown

Compliance status not directly stated in the verified web data. For RoHS/lead-free compliance, prefer variants with the 'N' suffix (e.g., 5M40ZM64I5N) which are documented as Matte-Tin (Pb-free) finish per MAX V family datasheet naming conventions.

Dữ liệu được xác minh vào: 2026-09-06 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Nguồn: Manufacturer Datasheet, Octopart, Distributor, Distributor, Distributor, Distributor, Manufacturer Product Page

Tìm kiếm liên quan

5M40ZM64I5 5M40ZM64I5 datasheet Intel 5M40ZM64I5 MAX V CPLD 32 macro cells 1.8V MBGA-64 CPLD industrial temperature 5M40ZM64I5 vs 5M80ZM64I5 5M40ZM64I5 glue logic address decoder buy 5M40ZM64I5 MBGA-64 stock what is the difference between 5M40ZM64I5 and 5M40ZE64I5 5M40ZM64I5 drop-in replacement MAX V CPLD 118.3 MHz 7.5 ns low power non-volatile CPLD industrial automation

Các bộ phận và thuật ngữ liên quan

Intel Altera 5M40ZM64I5 MAX V CPLD Complex Programmable Logic Device FPGA macro cell logic element MBGA-64 Micro BGA JEDEC MS-028 1.8 V 118.3 MHz 7.5 ns tPD JTAG IEEE 1149.1 Flash configuration memory Quartus Prime industrial temperature grade RoHS AEC-Q100 address decoder power sequencing glue logic