88W9098 - 2x2 Wi-Fi 6 + Bluetooth 5.3 SoC | NXP
MPN: 88W9098 ✓ Hoạt động88W9098 Tóm tắt
A wireless SoC (System-on-Chip) integrates the RF transceiver, baseband modem, MAC, and often the host interface into a single semiconductor device, sitting at the top of the wireless connectivity hierarchy: SoC -> wireless transceiver IC -> wireless chipset -> RF integrated circuit. This level of integration eliminates the need for discrete baseband and MAC devices, shrinking BOM count and board area for Wi-Fi product designs.
Key features of the 88W9098 include concurrent operation of two independent Wi-Fi radios plus dual-mode Bluetooth 5.3 on one chip, gigabit-level throughput enabled by 802.11ax OFDMA and MU-MIMO technology, dual-band 2.4 GHz and 5 GHz coverage, and a 148-VFQFN dual-row exposed-pad package for thermal and RF performance in compact designs.
Architecturally, the 88W9098 was the industry-first Wi-Fi 6 combo SoC with this concurrent dual-Wi-Fi, dual-Bluetooth architecture, meaning it can serve as an access point on one band while simultaneously acting as a station or maintaining Bluetooth Classic and BLE links. This concurrency enables gateway, mesh backhaul, and client functions to run at the same time without time-slicing penalties.
Typical applications include IoT gateways and hubs, enterprise and residential Wi-Fi access points, industrial wireless infrastructure, and embedded connectivity in smart home and industrial equipment where gigabit-level Wi-Fi 6 performance, reliability, and security are required.
Design consideration: the 88W9098 is packaged in a fine-pitch dual-row VFQFN and requires careful RF layout, impedance-controlled antenna routing, and exposed-pad thermal grounding; also note NXP reports long lead times (52-99 weeks on some orderables), so plan sourcing early.
This page synthesizes distributor pricing, orderability data, same-family variants, and practical sourcing notes not found in the manufacturer product page.
Bộ thay thế dễ dàng lắp đặt cho 88W9098 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 88W9098 (cùng hình factor và footprint) — khác nhau ở Antenna Configuration, Architecture, Frequency Bands.
88W9098-A2-NYGC/MP
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
88W9098-A2-NYKC/MP
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
88W9098-A2-NYKC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →88W9098-A2-NYKC/AK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
88W9098-A1-NYGC/AK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
88W9098 Thông số kỹ thuật
| Product Type | Wi-Fi 6 + Bluetooth 5.3 Wireless SoC |
| Wi-Fi Standard | IEEE 802.11ax (Wi-Fi 6) |
| Bluetooth Version | Bluetooth 5.3 (dual-mode, BR/EDR + BLE) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Antenna Configuration | 2x2 (dual spatial streams) |
| Architecture | Concurrent dual Wi-Fi + dual-mode Bluetooth |
| Throughput Class | Gigabit-level performance |
| Target Markets | IoT, Access, Industrial |
| Hộp | 148-VFQFN Dual Rows, Exposed Pad |
| Kiểu lắp đặt | Surface Mount |
| Silicon Revision (representative orderable) | A1 and A2 |
| Packing (88W9098-A2-NYKC) | REEL - Reel 13 inch Q2/T3 in Drypack |
| Minimum Package Quantity (88W9098-A2-NYKC) | 2000 |
| Minimum Order Quantity (88W9098-A2-NYGC) | 168 (tray) |
| Budgetary Price | $13.05 USD at 1K quantity (as of 2026-10-10) |
| Lead Time (88W9098-A2-NYKC) | 52 weeks |
| Lead Time (88W9098-A2-NYGC) | 99 weeks |
Hướng dẫn cấu hình chân 88W9098 2000
Cấu hình chân cho 88W9098 (2000 gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho 88W9098.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
88W9098 phù hợp cho 6 Áp dụngs: IoT Gateways and Hubs, Wi-Fi Access Points, Industrial Wireless Infrastructure, Smart Home Devices, Mesh Wi-Fi Systems, Embedded Wi-Fi + BT Connectivity Modules.
IoT Gateways and Hubs
The 88W9098 fits IoT gateways because its concurrent dual Wi-Fi architecture lets one 2x2 radio backhaul to the cloud on 5 GHz while the second radio serves local 2.4 GHz nodes, and its dual-mode Bluetooth 5.3 provides an out-of-band provisioning and commissioning channel. With Wi-Fi 6 (802.11ax) OFDMA, a gateway can aggregate many low-duty sensor clients efficiently, and gigabit-level throughput supports video and edge-compute traffic. The trade-off is the 148-VFQFN dual-row package's RF layout demands and the 52-99 week NXP lead time, so design-in planning and buffer stock are essential for gateway products.
Được đề xuất
Wi-Fi Access Points
For residential and enterprise access points, the 88W9098 provides 2x2 dual-band Wi-Fi 6 with MU-MIMO and OFDMA, delivering gigabit-level throughput and improved client density handling. Its industry-first concurrent dual Wi-Fi design allows simultaneous AP and station or mesh backhaul operation on one SoC, removing the need for a second discrete radio in mesh nodes and extenders. Bluetooth 5.3 enables easy setup via smartphone apps. Engineers should budget exposed-pad thermal grounding and impedance-controlled antenna routing in the RF layout, and should qualify the A2 silicon revision for production errata coverage.
Được đề xuất
Industrial Wireless Infrastructure
NXP explicitly targets the Industrial market with the 88W9098. In factory wireless infrastructure, its Wi-Fi 6 target wake time and OFDMA scheduling reduce airtime contention among many polled devices, while 5 GHz operation avoids the crowded 2.4 GHz band typical of brownfield plants. The concurrent dual-radio capability supports parallel control and monitoring networks on one chip, and Bluetooth 5.3 supports commissioning tools. Industrial deployments should select the AK-grade orderable for extended temperature qualification and account for the long factory lead time in spare-part planning.
Được đề xuất
Smart Home Devices
High-bandwidth smart home products such as security cameras, video doorbells, and streaming media hubs benefit from the 88W9098's dual-band 2x2 Wi-Fi 6 throughput and Bluetooth 5.3 setup flow. OFDMA and uplink scheduling maintain stable camera streams in congested RF environments, and target wake time reduces idle power for battery-assisted devices. The SoC's integrated architecture reduces BOM count versus discrete baseband plus radio designs. Designers must accommodate the 148-VFQFN dual-row footprint's antenna keep-out and exposed-pad grounding in compact consumer enclosures.
Được đề xuất
Mesh Wi-Fi Systems
Mesh routers and extenders are a natural fit: the 88W9098 can dedicate one 2x2 radio to wireless backhaul while the second serves client stations concurrently, achieving simultaneous backhaul and access without time-slicing a single radio. Wi-Fi 6 features such as OFDMA and BSS coloring improve coexistence in dense multi-node mesh deployments, and gigabit-level throughput preserves backhaul capacity for multi-gigabit fiber plans. For product lines, qualifying both the A2-NYGC tray and A2-NYKC reel orderables provides sourcing flexibility given the 52-99 week lead times.
Được đề xuất
Embedded Wi-Fi + BT Connectivity Modules
Module makers (for example, designs built around the 88W9098 such as Ezurio and Murata-based M.2 connectivity modules referenced in the verified data) integrate the SoC to offer drop-in Wi-Fi 6 + Bluetooth 5.3 connectivity to OEM customers. The SoC's concurrent dual-radio architecture allows modules certified for both infrastructure and client roles, and Bluetooth 5.3 covers BLE provisioning. Module designers should implement the exposed pad as the primary RF ground, follow NXP's hardware design package for pinout and reference clock routing, and plan for the part's minimum order quantities (168 tray / 2000 reel).
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 88W9098 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 88W9098-A2-NYGC/MP | 88W9098-A2-NYKC/MP | 88W9098-A2-NYKC/AK | 88W9098-A1-NYGC/AK |
|---|---|---|---|---|---|
| Package | 148-VFQFN Dual Rows, Exposed Pad | 148-VFQFN Dual Rows, Exposed Pad - same | 148-VFQFN Dual Rows, Exposed Pad - same | 148-VFQFN Dual Rows, Exposed Pad - same | 148-VFQFN Dual Rows, Exposed Pad - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6), 2x2 | 802.11ax, 2x2 | 802.11ax, 2x2 | 802.11ax, 2x2 | 802.11ax, 2x2 |
| Bluetooth Version | Bluetooth 5.3 dual-mode | Bluetooth 5.3 | Bluetooth 5.3 | Bluetooth 5.3 | Bluetooth 5.x (A1 revision, datasheet-dependent) |
| Silicon Revision | A2 (latest) | A2 | A2 | A2 | A1 (earlier) |
Bảo phân biệt quan trọng
- Industry-first concurrent dual Wi-Fi + dual-mode Bluetooth architecture (vs88W9098-A1-NYGC/AK (and all single-radio combo SoCs))
- Latest A2 silicon revision (vs88W9098-A1-NYGC/AK)
- Wi-Fi 6 (802.11ax) with gigabit-level throughput (vsLegacy 802.11ac/n combo SoCs)
Ghi chú thiết kế
The 88W9098 uses a fine-pitch 148-VFQFN dual-row package with exposed pad. Solder the exposed pad to a grounded thermal land with an array of vias to internal ground planes - this is both the primary RF ground return and the main heat removal path. Follow NXP's hardware design package for the dual-row breakout, antenna port impedance control (50-ohm microstrip/stripline), and keep-out zones around RF pins. Obtain the datasheet and hardware design guide from the NXP product page (account-gated) before starting layout.
Distinguish silicon revisions and ordering suffixes carefully: 88W9098-A1 versus A2 denote different silicon revisions with potentially different errata and firmware support, and suffixes NYGC/NYKC and AK/MP encode package/temperature and ordering grade. Ordering the wrong orderable can mean an unsupported revision or wrong temperature grade. Verify firmware compatibility with your chosen revision on the NXP software portal, and confirm packing (tray MOQ 168 vs reel MOQ 2000) matches your production volume.
Wi-Fi 6 SoCs exhibit high peak transmit current bursts during 2x2 OFDM transmissions. Provide a low-impedance supply with bulk capacitance near the RF power pins and follow NXP reference design decoupling. Sequence the radio's power domains per the hardware design guide, and consider a load switch (such as an NXP NX5P2553GV) for clean power-up. Budget thermal margin for sustained concurrent dual-radio operation, which raises average dissipation versus single-radio duty.
Keep the 2.4 GHz and 5 GHz antenna feed lines short, impedance-controlled, and routed away from switching regulators and crystal circuits. Isolate each antenna port's ground return to prevent inter-radio coupling, since the concurrent dual-Wi-Fi architecture means both chains can transmit simultaneously. Shield-sensitive analog supplies and follow the module reference designs (e.g., Murata/Ezurio 88W9098-based modules) for proven layouts.
Thông tin tuân thủ
RoHS/REACH declarations not present in the provided web data. Consult NXP's official compliance documentation for each specific orderable (88W9098-A2-NYKC, 88W9098-A2-NYGC/AK).
