A3P060-VQG100 60K Gate FPGA 231MHz 1.5V TQFP
MPN: A3P060-VQG100 ✓ Hoạt độngA3P060-VQG100 Tóm tắt
ProASIC3 is a flash-based FPGA family within the broader field-programmable gate array category. Unlike mask-programmable ASICs, an FPGA allows logic, routing, and interface behavior to be changed after manufacture through programming. The flash configuration architecture provides a single-chip implementation for applications that do not require an external configuration PROM, while the 100-pin TQFP package supports conventional surface-mount assembly.
Key device characteristics include 60,000 system gates, approximately 700 logic elements, 71 I/Os, a 1.5 V core voltage, and a listed maximum frequency of 231 MHz. These figures place the A3P060-VQG100 in the low-density, low-power end of the ProASIC3 family. The device is suitable for control logic, protocol bridging, instrumentation, industrial interfaces, embedded data acquisition, and system-support functions where a programmable logic fabric is more flexible than a fixed application-specific integrated circuit.
The nonvolatile flash FPGA architecture simplifies field updates and reduces the number of supporting components required for configuration. The 71 available I/Os provide connectivity for external memories, sensors, converters, communication devices, and control signals. In a typical design, the FPGA would receive serialized configuration data from a programming interface, support reset and clock management functions, and implement data acquisition, sequencing, or interface conversion in its programmable fabric.
Package and board layout are important design considerations for this 100-pin TQFP device. The exposed board area and pin pitch require careful fanout between the FPGA and surrounding circuitry, while the 1.5 V core supply should be filtered close to the device. Signal-integrity practices include short clock routes, controlled return paths, and separation between sensitive analog inputs and high-speed digital nets where the board design permits.
This page combines the verified device identity, package information, ProASIC3 feature summary, sourcing guidance, and engineering-oriented selection notes. It is intended to help engineers identify the correct A3P060-VQG100 configuration, plan a compatible replacement strategy, and select suitable application companions without confusing the exact orderable MPN with related ProASIC3 devices.
Bộ thay thế dễ dàng lắp đặt cho A3P060-VQG100 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P060-VQG100 (cùng hình factor và footprint) — khác nhau ở Logic Elements.
A3P060-VQG100T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P060-VQG100I
✅ Drop-In✗ Hết hàng
$6.95 / Đơn vị
Xem tài liệu →A3P060-VQG100 Tỷ lệ tối đa & tính chất điện
| Device Type | ProASIC3 Flash FPGA |
| System Gates | 60,000 gates |
| Logic Elements | Approximately 700 logic elements |
| User I/O | 71 I/Os |
| Maximum Frequency | 231 MHz |
| Core Voltage | 1.5 V |
| Configuration Memory | Nonvolatile flash |
| Hộp | 100-pin TQFP |
| Package Designation | VQG100 |
| Kiểu lắp đặt | Surface mount |
| Programming | User-programmable |
| Product Family | ProASIC3 |
| Product Type | Field-programmable gate array |
| Automotive Qualification | AEC-Q100 |
Hướng dẫn cấu hình chân A3P060-VQG100 vqg100
Cấu hình chân cho A3P060-VQG100 (vqg100 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P060-VQG100.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P060-VQG100 phù hợp cho 6 Áp dụngs: Industrial Data Acquisition, Programmable Protocol Bridging, Instrumentation Signal Processing, Embedded Security and Key Management, Motor and Power-System Control, Consumer and Communication Accessories.
Industrial Data Acquisition
The A3P060-VQG100 fits compact industrial acquisition systems that must combine sensor conditioning, digital filtering, channel sequencing, and control logic in one programmable device. Its 71 user I/Os provide ample board connectivity for multiplexed converters, digital sensors, calibration storage, status indicators, and communications transceivers, while approximately 700 logic elements support moderate control paths. The 231 MHz maximum listed frequency provides substantial timing margin for parallel ADC interfaces, digital filtering, and state-machine coordination. Nonvolatile flash configuration is especially useful when field updates are required without an external configuration PROM. Engineers should budget the 1.5 V core rail carefully, validate timing against the selected speed grade, and reserve unused pins for the device’s required configuration and control functions.
Được đề xuất
Programmable Protocol Bridging
The A3P060-VQG100 is appropriate for protocol conversion and legacy-interface bridging because its programmable logic can adapt parallel buses, serial links, handshake signals, and timing relationships without a custom ASIC. The 71 I/Os allow concurrent connections among host processors, transceivers, memories, and level translators, while the approximately 700 logic elements are appropriate for moderate-width data paths and control state machines. The 231 MHz listed maximum frequency supports pipelined interfaces where the selected grade can close timing. A practical implementation should define clock domains carefully, constrain interface timing, and use synchronizers whenever asynchronous signals cross domains. The 1.5 V core supply requires local decoupling and a quiet return path, and the TQFP footprint needs deliberate fanout to keep external-interface routing manageable.
Được đề xuất
Instrumentation Signal Processing
Within instrumentation and test equipment, the A3P060-VQG100 can implement parallel measurement control, trigger logic, data formatting, correction tables, and interface sequencing. Its 71 user I/Os suit multiplexed analog front ends, counters, display drivers, memory interfaces, and supervisory processors, while the 60,000-gate density provides useful logic capacity for moderate digital signal-processing pipelines. The 231 MHz listed maximum frequency enables pipelined operations such as calibration lookup, filtering, and data packing. Flash-based configuration supports field-updatable measurement algorithms and simplifies deployment compared with an external-PROM design. Designers should isolate sensitive analog routing from digital activity, use controlled clock distribution, and verify timing closure under the actual temperature and supply conditions of the instrument.
Được đề xuất
Embedded Security and Key Management
The A3P060-VQG100 can support embedded security functions such as protocol authentication, packet filtering, command parsing, key-state logic, and tamper-response sequencing. The approximately 700 logic elements suit compact block ciphers, hash datapaths, and control functions when optimized for area rather than maximum system size, while 71 I/Os connect secure elements, flash storage, debug interfaces, and status signals. The nonvolatile flash configuration architecture allows implementation details to remain embedded in the device and can simplify controlled field updates. Security designs should use the manufacturer’s recommended device features and avoid assuming that a generic FPGA implementation alone provides certification. Review the electrical limits, startup behavior, programming security provisions, and fault-handling requirements before using the part in a security-critical product.
Được đề xuất
Motor and Power-System Control
The A3P060-VQG100 fits supervisory control and sequencing tasks in motor drives, power-conversion equipment, and industrial power systems where deterministic logic must coordinate converters, protection signals, and fault reporting. The 71 user I/Os can connect gate-driver control, current and voltage comparators, fault latches, communications, and status indicators. The 231 MHz listed maximum frequency supports fast control-loop and timing-management tasks, while approximately 700 logic elements are suitable for state machines, pulse-width generation, and supervisory protection rather than demanding CPU workloads. The 1.5 V core rail and TQFP package simplify compact controller construction, but high-current switching paths and noisy power stages should remain physically separated from sensitive digital timing. Validate timing, logic levels, and fault-safe behavior across the complete operating environment.
Được đề xuất
Consumer and Communication Accessories
The A3P060-VQG100 is useful in compact communication accessories where a small programmable device must translate controls, arbitrate interfaces, maintain protocol timing, or implement custom indicators without a large FPGA. Its 71 I/Os can support serial links, programmable buttons, displays, audio routing, and status LEDs, while nonvolatile flash configuration removes the need for a separate boot PROM. The approximately 700 logic elements and 231 MHz listed maximum frequency handle moderate-width data movement and control, though they are not intended for processor-class workloads. Compact TQFP assembly makes board partitioning straightforward, although the 100-pin footprint requires careful escape routing. Confirm package pin assignments, supported I/O standards, supply sequencing, and programming procedures before schematic release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P060-VQG100 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P060-VQG100T | A3P060-VQG100I |
|---|---|---|---|
| Package | 100-pin TQFP (VQG100) | 100-pin TQFP (VQG100) | 100-pin TQFP (VQG100) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 |
| System Gates | 60,000 gates | 60,000 gates | 60,000 gates |
| Logic Elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements |
| User I/O | 71 I/Os | 71 I/Os | 71 I/Os |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V |
| Maximum Frequency | 231 MHz | 231 MHz | 231 MHz |
| Configuration Memory | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
| Grade or Suffix | Base orderable MPN | T suffix | I suffix |
Bảo phân biệt quan trọng
- Compact low-density programmable logic with a broad I/O count (vsA3P060-VQG100T)
- Single-chip nonvolatile configuration architecture (vsA3P060-VQG100I)
- Direct 1.5 V core integration at the listed 231 MHz maximum (vsA3P060-VQG100T)
Ghi chú thiết kế
Plan a clean 1.5 V core rail and place the required decoupling network directly at the package power pins. Separate the FPGA’s supply routing from noisy switching nodes and analog return currents, and provide the supply levels required by attached I/O devices. Confirm startup, operating-voltage, and power-sequencing limits against the manufacturer documentation before finalizing the power tree.
Use the VQG100 manufacturer land pattern and pin numbering rather than inferring connections from a generic 100-pin symbol. Route clocks to the shortest practical destinations, avoid crossings between high-speed clock and sensitive input nets, and maintain continuous ground-plane references. The 71 user I/Os leave limited unused pins, so pin planning should occur before placement and routing.
Do not treat every A3P060 suffix as an exact substitution. The T and I variants retain the family identity and package but represent distinct grade or ordering options. Confirm the required operating-temperature range, qualification target, speed grade, and ordering information before substituting a suffix. Do not approve a cross-family or cross-brand device unless its pinout, power pins, configuration interface, and timing constraints have been verified.
Create clean clock domains and use the recommended synchronizer structures for asynchronous inputs. Keep external clocks away from switching-node return currents and follow the manufacturer’s input, output, and slew guidance when driving capacitive loads. If the design uses source-synchronous interfaces, analyze pin-to-pin skew and board length matching in addition to the nominal 231 MHz device frequency.
Thông tin tuân thủ
The product listing identifies the A3P060 family as automotive AEC-Q100. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the applicable Microchip product documentation.