A42MX16-TQG176A - 24K Gate 5V FPGA, 176-TQFP | Microchip
MPN: A42MX16-TQG176A ✓ Hoạt độngA42MX16-TQG176A Tóm tắt
An FPGA (Field-Programmable Gate Array) is a class of programmable logic IC whose interconnect and logic functions are configured by the designer after manufacturing, occupying the middle of the programmable-logic hierarchy between simple CPLDs and high-density system-on-chip FPGAs. The MX family is positioned as a reliable, single-chip ASIC alternative, built on 0.45 um flash/antifuse-backed technology for high-volume, cost-sensitive designs and legacy PLD integration.
Key features include the efficient 5.0V MX architecture that directly interfaces with legacy 5V logic without level shifting, 153 MHz system speed for moderate-performance sequential designs, and a compact yet thermal-friendly TQFP-176 footprint with 0.5 mm pitch leads suitable for standard surface-mount assembly. The A grade suffix indicates automotive quality screening, supporting extended-reliability transportation and industrial programs.
Technically, the MX fabric combines combinational and sequential modules with dedicated routing, allowing designers to consolidate multiple legacy PLDs, glue logic, and state machines into one low-cost device while preserving pinout stability across the A42MX09/A42MX16/A42MX24/A42MX36 family members.
Typical applications include industrial automation controllers, transportation and automotive subsystems, motor-drive sequencing, legacy MIL/AERO logic upgrades, and high-volume embedded control boards that need deterministic single-chip logic at low unit cost.
When designing with this device, verify the 5V supply rail integrity and decouple VCC/VPP per the Microsemi 40MX/42MX datasheet (DS2136/DS2316); also confirm programmer compatibility (Silicon Sculptor / FlashPro family tooling) early in the project.
Bộ thay thế dễ dàng lắp đặt cho A42MX16-TQG176A — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A42MX16-TQG176A (cùng hình factor và footprint) — khác nhau ở Package, System Gates, Family, Supply Voltage, Process Technology.
A42MX16-2TQG176
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A42MX16-3TQG176
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A42MX16-TQG176M
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A42MX16-2TQ176
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A42MX24-TQG176A
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A42MX09-3TQG176
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →A42MX16-TQG176A Tỷ lệ tối đa & tính chất điện
| Family | MX (42MX) |
| System Gates | 24000 gates |
| Logic Cells | 608 cells |
| User I/O | 140 |
| Maximum System Frequency | 153 MHz |
| Process Technology | 0.45 um |
| Điện áp cung cấp | 5 V |
| Temperature Grade | Automotive (A grade) |
| Hộp | 176-TQFP |
| Kiểu lắp đặt | Surface Mount |
| Configuration Type | One-time programmable (MX antifuse architecture) |
| Trạng thái RoHS | Lead Free |
| Packaging | Tray |
| Programming Tools | Silicon Sculptor / FlashPro (per Microchip MX programming flow) |
Cấu hình chân A42MX16-TQG176A
| Chân 1-176 | TQ176 pin grid — 140 user-defined I/O modules plus dedicated VCC, GND, and programming pins; full per-pin assignment is given in the Microsemi 40MX/42MX datasheet DS2316 TQ176 package table. MX I/O placement is user-configured in Libero, so pin names depend on the design bitstream. |
Ứng dụng tiêu biểu
A42MX16-TQG176A phù hợp cho 6 Áp dụngs: Industrial Automation Controllers, Automotive and Transportation Subsystems, Legacy PLD Consolidation and Migration, Aerospace and Defense Logic Upgrades, Motor Drive and Power Sequencing, Embedded Control and Test Equipment.
Industrial Automation Controllers
The A42MX16-TQG176A fits industrial controller boards that must bridge legacy 5V PLC I/O with newer digital subsystems. Its native 5V MX architecture with 140 user I/Os eliminates level translators on TTL backplanes, while 608 logic cells and 153 MHz capability handle state machines, sequencing, and interlock logic. Consolidating several PLDs into one device cuts BOM count; the antifuse fabric retains configuration through power loss and industrial vibration without external configuration memory.
Được đề xuất
Automotive and Transportation Subsystems
With its automotive A-grade screening, the A42MX16-TQG176A is targeted at transportation electronics such as body-control auxiliary logic, gateways, and powertrain support boards. The 5V tolerant architecture interfaces directly with automotive 5V sensor and actuator signaling, and 153 MHz performance covers CAN framing glue, PWM generation, and safety interlocks. Its one-time-programmable fabric removes configuration-readback security concerns valued in vehicle platforms with long service lifetimes.
Được đề xuất
Legacy PLD Consolidation and Migration
The MX family was designed explicitly to integrate legacy PLDs into a single, low-cost device. Designers map multiple 22V10-class PLDs, counters, and glue logic into the A42MX16's 608 cells while keeping the existing 5V board environment unchanged. The 176-TQFP footprint stays pin-stable across A42MX09/16/24/36 densities, so a design can grow or shrink on the same PCB. This makes the part a deterministic ASIC alternative for end-of-life component redesigns and obsolescence management programs.
Được đề xuất
Aerospace and Defense Logic Upgrades
The MX family's military (M grade) variants and radiation-tolerant heritage make the A42MX16-TQG176A relevant for defense board refresh programs. Although this A-grade unit targets automotive screening, the same TQ176 footprint is shared with TQG176M military parts, enabling common layouts across commercial and defense builds. The 5V architecture matches MIL-standard TTL signaling, and antifuse retention survives harsh environments without configuration devices - a common requirement in avionics upgrades.
Được đề xuất
Motor Drive and Power Sequencing
Motor controllers benefit from the A42MX16's deterministic fabric for PWM generation, dead-time insertion, fault latching, and gate-driver sequencing at up to 153 MHz internal performance. Its 140 I/Os fan out to multiple gate drivers and current-sense comparators without external glue logic, and the 5V rails align with classic analog control circuits on drive boards. Because the antifuse configuration powers up instantly, drive outputs are defined immediately at power-on without configuration delay.
Được đề xuất
Embedded Control and Test Equipment
Bench and rack test instruments use the A42MX16-TQG176A for timing generators, trigger matrices, and bus interface glue between legacy 5V measurement front ends and modern controllers. The 176-TQFP provides enough I/O for relay control arrays, front-panel interfaces, and parallel data capture. Its low unit cost in volume makes it attractive for instrument product lines spanning decades, and the Microchip Libero toolchain plus Silicon Sculptor programming keeps rework and field updates tractable.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A42MX16-TQG176A — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A42MX16-2TQG176 | A42MX16-TQG176M | A42MX24-TQG176A | A42MX09-3TQG176 |
|---|---|---|---|---|---|
| Package | 176-TQFP | 176-TQFP - same | 176-TQFP - same | 176-TQFP - same | 176-TQFP - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 24000 | 24000 | 24000 | 36000 | 9000 |
| Logic Cells | 608 | 608 | 608 | 928 | 288 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Automotive (A) | Commercial | Military | Automotive (A) | Commercial |
Bảo phân biệt quan trọng
- Native 5V architecture eliminates level translation (vsModern 3.3V FPGAs (e.g., Artix-class parts))
- Same 176-TQFP footprint spans 9K-36K gate densities (vsA42MX24-TQG176A)
- Automotive A-grade screening at MX cost point (vsA42MX16-2TQG176)
- One-time-programmable security and instant power-up (vsSRAM-based FPGAs)
Ghi chú thiết kế
The MX family runs from a single 5.0V rail. Follow the Microsemi 40MX/42MX datasheet (DS2316) decoupling guidance: place low-ESR 0.1uF ceramic capacitors at each VCC pin pair plus bulk 10uF at the board entry. Program supply pins require the specified programming voltage only during Silicon Sculptor programming; in operation they follow datasheet biasing. Verify inrush on hot-plug 5V rails used in industrial backplanes.
The 176-TQFP uses 0.5 mm lead pitch - specify a solder-mask-defined footprint per IPC-7351-style QFP land patterns and keep fan-out vias at 0.3 mm drill or smaller to escape 140 I/Os on two signal layers. The device footprint is shared across A42MX09/16/24/36 TQ176 parts, so lay out the board once and populate any density - a deliberate MX-family feature for future-proofing and obsolescence management.
MX FPGAs are one-time programmable: a wrong bitstream permanently consumes a device, so always prototype before programming production trays. Because I/O placement is user-defined, cross-check every Libero pin assignment against the DS2316 TQ176 pin table before layout release. Also confirm which grade (A/M/C) your quality system requires - mixing automotive A-grade and military M-grade parts on one drawing will complicate traceability.
Native 5V CMOS output edges are fast enough to cause ringing on un-terminated long traces above roughly 10 cm; add series 22-33 ohm resistors on board-level buses. For mixed 5V/3.3V sections, use LVC-family translators rather than driving 3.3V-only inputs directly, and keep the 140 user I/Os grouped by bank to minimize crosstalk between high-activity clock routing and quiet analog-adjacent pins.
Thông tin tuân thủ
Distributor listings indicate LEAD FREE construction (G suffix lead finish). A-grade denotes automotive screening per Microsemi grade system; formal AEC-Q100 qualification status not stated in provided data.
