Analog Devices

AD521SD - Instrumentation Amplifier | Analog Devices

MPN: AD521SD ✗ Cuối đời
10 V Vdss 5 mA Id 14-pin ceramic DIP-style package Package
MOQ: 1 |

AD521SD Tóm tắt

The Analog Devices AD521SD is a monolithic programmable instrumentation amplifier designed to amplify small differential signals accurately and reliably. The device accepts supply voltages from 10 V to 36 V, operates from -55°C to +125°C, provides one amplifier circuit, and is associated with a 14-pin ceramic DIP-style package. Its programmable input-to-output gain relationship makes it suitable for sensor interfaces, industrial measurement systems, and instrumentation requiring consistent signal conditioning.

An instrumentation amplifier is a specialized analog amplifier that receives differential input signals and rejects common-mode interference. Positioned within the signal-chain hierarchy of amplifier IC, signal-conditioning IC, analog IC, and semiconductor, it combines input-stage behavior, differential gain control, and output amplification in one monolithic component. The AD521 is a second-generation, low-cost monolithic instrumentation amplifier from Analog Devices.

The AD521 family is organized around four accuracy and temperature grades. The economical J grade and low-drift K grade are specified from 0°C to +70°C, while the lower-drift, high-linearity L grade is also specified over that range. The S grade, represented by AD521SD, guarantees performance to specification from -55°C to +125°C. This makes the S-grade selection appropriate for extended-temperature industrial and aerospace-related instrumentation.

The AD521 supports a maximum supply span of 36 V and a minimum supply span of 10 V. Its listed supply current is 5 mA, and its slew rate is 10 V/µs. Because gain is programmable, designers can tailor signal amplification for different transducer output ranges while maintaining a consistent interface topology. Exact gain accuracy, input impedance, offset voltage, noise, bandwidth, and allowable temperature drift should be selected from the AD521 manufacturer data sheet for the required grade.

Typical uses include bridge-transducer measurement, strain-gauge signal conditioning, process-control instrumentation, laboratory measurement equipment, and industrial data-acquisition systems. In each case, the differential input arrangement helps suppress common-mode voltage while the programmable gain establishes the required signal scaling. The extended-temperature S-grade specification also supports equipment exposed to greater thermal variation than ordinary commercial-grade parts.

Layout should preserve the differential signal path and place input-sensing connections away from noisy power and switching nodes. Use a clean ground reference, minimize long parallel routes between input pairs, and follow the manufacturer application guidance for gain-setting components and supply bypassing. Confirm the exact package pinout and component values against the AD521 data sheet before fabrication.

This page combines the manufacturer product description, package and lifecycle information, qualified-price evidence, application guidance, and a clearly bounded search for genuine drop-in replacements. It also distinguishes the exact AD521SD orderable part from related grade and screening variants so engineers can make sourcing and redesign decisions without assuming that every similarly named device is footprint-compatible.

Bộ thay thế dễ dàng lắp đặt cho AD521SD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD521SD (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Product Type, Gain, Temperature Grade.

Analog Devices
Mounting Type: Through-hole ceramic DIP
Package: 14-pin ceramic DIP
Product Type: Precision instrumentation amplifier
So sánh với AD521SD →
Analog Devices
Mounting Type: Through-hole
Package: 14-lead ceramic DIP
Product Type: Monolithic precision instrumentation amplifier
So sánh với AD521SD →

AD521SD/883B

✅ Drop-In
📦 14-CDIP
Same AD521SD base designation and 14-CDIP format; adds an 883-style qualification or screening designation, with no quantified core electrical difference established in the available data

📋 Tham chiếu thay thế (không có trong danh mục)

AD521SD Tỷ lệ tối đa & tính chất điện

Product Type Monolithic programmable instrumentation amplifier
Number of Circuits 1 circuit
Minimum Supply Span 10 V
Maximum Supply Span 36 V
Điện áp cung cấp 5 mA
Nhiệt độ hoạt động -55°C to +125°C
Temperature Grade S grade
Slew Rate 10 V/µs
Kiểu lắp đặt Through hole
Hộp 14-pin ceramic DIP-style package
Số lượng chân 14 pins
Input Type Differential input
Gain Programmable input/output gain relationship
Trạng thái vòng đời Obsolete
Minimum Order Quantity 4 units

Hướng dẫn cấu hình chân AD521SD 14-pin ceramic dip-style package

Cấu hình chân cho AD521SD (14-pin ceramic dip-style package gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14-pin ceramic dip-style package cho AD521SD

Không có dữ liệu chân cụ thể sẵn có cho AD521SD.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD521SD phù hợp cho 6 Áp dụngs: Bridge Transducer Signal Conditioning, Strain Gauge Measurement, Process Control Instrumentation, Laboratory Measurement Equipment, Aerospace-Related Test Equipment, Data Acquisition Front Ends.

🏭

Bridge Transducer Signal Conditioning

The AD521SD fits bridge-transducer front ends that require differential excitation sensing and programmable gain. Its differential instrumentation-amplifier architecture is intended to amplify the small voltage produced by a bridge while reducing common-mode pickup from surrounding equipment. The 10 V to 36 V supply range supports industrial systems with regulated intermediate rails, while the 10 V/µs slew rate provides useful bandwidth for many sensor signals. Because the AD521SD is specified from -55°C to +125°C, it is also appropriate for temperature-varying factory or process equipment. The designer should establish the gain setting, verify input common-mode limits, and follow the manufacturer bypass and layout guidance.

⚡

Strain Gauge Measurement

AD521SD is suitable for strain-gauge instrumentation where a mechanical element changes the resistance of one or more bridge arms and produces a small differential output. The instrumentation-amplifier topology accepts the bridge differential signal and applies programmable gain before downstream conversion or control. Its listed 5 mA supply current and 10 V/µs slew rate provide useful operating characteristics for low-rate force, pressure, and displacement measurements. The -55°C to +125°C S-grade specification supports equipment exposed to wide ambient or enclosure temperature changes. PCB routing should keep the bridge excitation and sense paths balanced and isolated from relay contacts, power converters, and digital switching nodes.

🏭

Process Control Instrumentation

The AD521SD can condition low-level process signals in industrial control panels, transmitters, and data-acquisition equipment. Its programmable differential gain allows one analog frontend to cover several sensor output ranges, while the 10 V to 36 V supply span can accommodate conventional industrial intermediate voltages. The extended -55°C to +125°C specification is valuable in equipment installed near furnaces, valves, or other thermally variable machinery. Designers should confirm the selected gain does not exceed the AD521SD input common-mode or output-swing limits, provide stable references, and use an analog ground strategy that prevents control-loop currents from entering the differential input path.

🖥️

Laboratory Measurement Equipment

AD521SD is applicable to laboratory instruments that measure small differential voltages referenced to noisy analog environments. The differential inputs help reject common-mode voltage, while programmable gain reduces the need for multiple front-end ranges. A supply span of 10 V to 36 V and a 10 V/µs slew rate make the device relevant to moderate-bandwidth measurement circuits rather than only static measurements. The S-grade operating range also supports temperature-controlled test chambers and industrial laboratory equipment. For best performance, use shielded or tightly twisted sensor wiring, maintain symmetry between input routes, and reference the measurement system to a quiet analog ground with separate return paths for digital and power currents.

✈️

Aerospace-Related Test Equipment

AD521SD can serve as the analog input stage in test and monitoring equipment associated with aerospace or other severe-temperature environments. Its guaranteed -55°C to +125°C range distinguishes the S grade from the AD521 family versions specified from 0°C to +70°C. The instrumentation-amplifier configuration accepts differential sensor signals, while programmable gain reduces the dynamic range that must be handled by downstream converters. Qualification remains application-specific: engineers should review screening requirements, solder and assembly controls, vibration, power quality, and system reliability rather than treating the extended-temperature rating as complete system qualification. AD521SD/883B may be considered when the program requires the associated 883-style documentation.

📊

Data Acquisition Front Ends

AD521SD is useful in multi-channel data-acquisition front ends where each sensor produces a differential signal at a different amplitude. The programmable gain relationship allows the same amplifier family to normalize several transducer ranges, while the 10 V to 36 V supply range simplifies integration with existing high-voltage analog rails. The 10 V/µs slew rate supports moderate-rate acquisition and the -55°C to +125°C specification helps cover equipment operating in factories or environmental chambers. Layout should account for channel-to-channel crosstalk, keep gain-setting and bypass connections compact, and provide local supply decoupling. The complete pin assignment and recommended external components should be taken directly from the Analog Devices data sheet.

Tóm tắt các sản phẩm được đề xuất

AD521SD Analog Devices Được sử dụng trong: Bridge Transducer Signal Conditioning, Strain Gauge Measurement, Process Control Instrumentation, Laboratory Measurement Equipment, Aerospace-Related Test Equipment, Data Acquisition Front Ends AD521SD/883B Qualified 14-CDIP sibling for controlled programs Được sử dụng trong: Bridge Transducer Signal Conditioning, Strain Gauge Measurement, Process Control Instrumentation, Laboratory Measurement Equipment, Aerospace-Related Test Equipment, Data Acquisition Front Ends
What is the AD521SD?
The AD521SD is an Analog Devices monolithic programmable instrumentation amplifier with one circuit, a 10 V to 36 V supply range, and an operating-temperature specification of -55°C to +125°C. According to the Analog Devices AD521 product information, it is a second-generation, low-cost gain block with differential inputs and an accurately programmable input-to-output gain relationship.
What operating voltage does the AD521SD use?
The AD521SD operates from a minimum supply span of 10 V to a maximum supply span of 36 V. The Analog Devices product listing identifies the device as a single-circuit instrumentation amplifier with a listed supply current of 5 mA. Designers should leave suitable operating margin below the 36 V maximum and verify startup, bypass, and decoupling requirements in the manufacturer data sheet.
What temperature range is specified for the AD521SD?
The AD521SD is specified over -55°C to +125°C. Analog Devices identifies it as the S grade of the AD521 family and states that the S grade guarantees performance to specification over the extended temperature range. This distinguishes it from the J, K, and L grades, which are specified from 0°C to +70°C according to the manufacturer product information.
Is the AD521SD currently active?
The AD521SD is listed as obsolete in the available product-status information. Because the exact orderable part is no longer active, engineers should use the Analog Devices AD521 family documentation to determine whether a supported grade or a qualified legacy sourcing route is appropriate. The manufacturer product page remains the authoritative place to check current lifecycle status and support options.
What is the gain function of the AD521SD?
The AD521SD provides a programmable differential gain relationship between its input and output signals. According to the Analog Devices AD521 description, the IC is a true instrumentation-amplifier gain block with differential inputs and an accurately programmable input-to-output gain relationship. Exact gain equations and permitted settings must be taken from the AD521 data sheet for the selected grade.
Where can I download the AD521SD datasheet PDF?
The official AD521 product page is the appropriate starting point for the manufacturer datasheet and product information. It identifies the AD521SD as the S-grade, extended-temperature member of the AD521 instrumentation-amplifier family. Use the Analog Devices page for the current data sheet, grade-selection table, package details, and any obsolete-product notices before committing the exact MPN to a new design.
Where can I find the AD521SD pinout?
The AD521SD pin assignment should be taken from the pin-description table in the Analog Devices AD521 manufacturer data sheet. The available listings associate this device with a 14-pin through-hole package, but they do not expose a complete numbered pin table. Confirm signal names, gain-control connections, supply pins, and package orientation against the official document before laying out a PCB.
What can replace the AD521SD?
No independently verified cross-brand, pin-to-pin replacement for the AD521SD was identified in the available cross-reference material. The closest documented related orderable part is AD521SD/883B, which retains the 14-CDIP format and adds an 883-style screened designation. Treat it as a qualified sourcing option only after checking gain behavior, temperature grade, screening, pinout, and lifecycle requirements against the original design.
Can AD521SD/883B replace the standard AD521SD?
AD521SD/883B is the strongest documented drop-in candidate for AD521SD because the listings associate both with the 14-CDIP format and the same AD521SD base designation. The 883 suffix indicates an additional qualification or screening configuration. Final substitution still requires comparing the electrical limits, temperature guarantees, gain accuracy, pin functions, and procurement documentation for the exact assembled system.
Is the AD521SD suitable for extended-temperature instrumentation?
Yes, the AD521SD is specifically appropriate when an extended-temperature specification is required because Analog Devices specifies the S grade from -55°C to +125°C. The J, K, and L family grades are specified only from 0°C to +70°C. For industrial systems, verify the complete system-level temperature range and use the manufacturer grade-selection table to confirm that every electrical parameter remains within specification.
AD521SD vs AD521SD/883B: which is better for a new build?
AD521SD is the standard S-grade orderable part, while AD521SD/883B is associated with the same 14-CDIP format plus an 883-style qualification designation. For a new commercial or industrial build, the standard AD521SD is the closer functional choice when it meets procurement and qualification requirements. For a screened or controlled-environment program, compare the documented 883 requirements before selecting the specialized variant.
When should I choose AD521SD over another instrumentation amplifier?
Choose AD521SD when a design specifically calls for the AD521 gain block, a 10 V to 36 V supply range, and guaranteed operation from -55°C to +125°C. It is particularly relevant to legacy or extended-temperature instrumentation where redesigning the analog frontend is undesirable. For new projects, first compare modern instrumentation amplifiers on noise, offset, bandwidth, input protection, supply range, and package availability.
Where to buy AD521SD online?
Use the Request a Quote form on this page to request AD521SD availability, minimum order quantity, and lifecycle sourcing support. The exact AD521SD is reported as obsolete, so availability may depend on qualified remaining inventory rather than normal production allocation. A sourcing request should identify the required quantity, operating-temperature needs, package, and whether an AD521SD/883B screened configuration is acceptable.
What is the lead time for AD521SD?
The current lead time for AD521SD should be requested through the Request a Quote form on this page because the exact part is reported as obsolete and normal distributor allocation does not apply. State the required quantity and whether the AD521SD/883B configuration is permitted in the quotation request. For production planning, request delivery scheduling and traceability information rather than relying on generic stock estimates.
Is AD521SD in stock?
Stock for AD521SD must be confirmed through the Request a Quote form on this page because the exact device is reported as obsolete. The available listing shows a four-unit minimum order quantity, but that does not by itself establish current stock or inventory depth. Provide your required quantity, date code needs, and acceptable AD521SD/883B substitute criteria when requesting a supply response.
What are the key specifications of AD521SD that engineers should know?
The principal documented characteristics are one instrumentation-amplifier circuit, a 10 V minimum supply span, a 36 V maximum supply span, 5 mA listed supply current, a 10 V/µs slew rate, through-hole mounting, and an S-grade operating range of -55°C to +125°C. These values place AD521SD in the legacy extended-temperature instrumentation-amplifier category and should be checked against the manufacturer data sheet during design signoff.

Dữ liệu tham khảo kỹ thuật cho AD521SD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose AD521SD when maintaining an existing extended-temperature measurement system requires the exact AD521SD base device, a 10 V to 36 V supply range, and operation from -55°C to +125°C. It is especially appropriate for legacy bridge, strain-gauge, process-control, and laboratory interfaces where changing the PCB footprint would be disruptive. Consider AD521SD/883B when the same 14-CDIP format and base electrical design are acceptable but an 883-style screening or qualification designation is required. Do not treat J, K, or L grade devices as automatic drop-in choices: although they belong to the same family, their specified temperature ranges and orderable package details differ. For new designs, compare modern instrumentation amplifiers in parallel with lifecycle risk, noise, offset, bandwidth, common-mode range, input protection, and total board redesign effort. Confirm the complete pinout, gain settings, recommended external components, and production documentation directly with Analog Devices before releasing either orderable part into new production.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD521SD/883B
Brand Analog Devices Analog Devices
Package 14-pin ceramic DIP-style package 14-CDIP
Product Type Programmable instrumentation amplifier Instrumentation amplifier
Number of Circuits 1 circuit 1 circuit
Qualification Designation S grade 883-style designation

Bảo phân biệt quan trọng

  • Extended-temperature S-grade specification (vsAD521SD/883B)
  • Direct integration with high-voltage industrial rails (vsAD521SD/883B)
  • Programmable instrumentation gain in a monolithic IC (vsAD521SD/883B)

Ghi chú thiết kế

Keep the two differential input paths short, symmetric, and physically separated from power converters, relays, and digital switching nodes. Route each input as a closely coupled pair where possible, avoid switching-current paths beneath the instrumentation amplifier, and provide a quiet analog-ground return. Pin and component placement should follow the Analog Devices AD521 data sheet because the exact pin functions and exposed connections must be confirmed before fabrication.

Design the supply network for the documented 10 V to 36 V operating span while retaining margin below the 36 V maximum. Place required bypass capacitors close to the supply pins, use a low-impedance return path, and isolate the AD521SD supply from switching-node currents where possible. Verify startup behavior, supply sequencing, and the effect of power-supply ripple at the selected gain in the manufacturer application guidance.

Do not substitute a similarly named AD521 grade solely by matching the product description. The J, K, and L grades are specified from 0°C to +70°C, whereas the S grade is specified from -55°C to +125°C. Also check the gain-control implementation, pinout, package type, lifecycle status, and screening designation. A qualified sourcing request should identify whether AD521SD/883B is acceptable before any schematic change is approved.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is recorded as not applicable because this is an instrumentation amplifier rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD521SD datasheet AD521SD datasheet pdf AD521SD pinout AD521SD specifications Analog Devices AD521SD AD521SD 14-CDIP package AD521SD instrumentation amplifier AD521SD equivalent AD521SD replacement AD521SD vs AD521SD/883B AD521SD bridge amplifier AD521SD strain gauge circuit AD521SD price AD521SD stock what replaces AD521SD

Các bộ phận và thuật ngữ liên quan

Analog Devices AD521SD AD521SD/883B AD521 instrumentation amplifier programmable gain amplifier differential amplifier gain block monolithic integrated circuit analog IC amplifier IC signal-conditioning IC semiconductor 14-CDIP ceramic DIP through-hole mounting S grade -55°C to +125°C 10 V to 36 V supply 5 mA supply current 10 V/µs slew rate bridge transducer strain gauge industrial instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ