AD673JN - 8-Bit SAR ADC with Reference | Analog Devices
MPN: AD673JN ✓ Hoạt độngAD673JN Tóm tắt
An ADC converts a continuously varying analog voltage into a digital value for processing, measurement, or control. The AD673 belongs to the successive-approximation ADC category, within the broader hierarchy of data-converter ICs and signal-processing semiconductors. Rather than requiring a separate reference, comparator, clock, and internal DAC, the AD673 combines these functions on one monolithic chip, simplifying instrumentation and industrial data-acquisition designs.
Key features include 8-bit resolution, a maximum conversion time of 30 microseconds, unipolar and bipolar input capability, and no missing codes over the specified temperature range. The converter operates from +5 V and -15 V supplies, while its integrated voltage reference, internal clock, and three-state output buffers reduce external component count. These characteristics suit process monitoring, digital instrumentation, industrial control, and embedded measurement systems requiring deterministic acquisition timing.
The internal successive-approximation function uses integrated injection logic, and the internal DAC uses a laser-trimmed, high-stability silicon-chromium thin-film resistor ladder. A temperature-compensated subsurface Zener reference supports stable conversion performance. Full-byte or 16-bit microprocessor bus interface options allow the converter to operate with processors using either byte-oriented or wider parallel data arrangements.
Typical applications include industrial process measurement, laboratory data-acquisition systems, digital panel meters, embedded control platforms, and legacy computer interface cards. In each case, the integrated converter functions simplify the analog front end while the 30 microsecond maximum conversion time provides a defined upper bound for sampling cycles.
When designing the circuit, preserve the negative supply arrangement required by the converter and use the manufacturer pin-description table when assigning data-bus and control signals. Verify input range, output coding, timing, and acquisition-system settling requirements against the Analog Devices AD673 datasheet before fixing the analog front-end and bus timing.
This product overview combines the converter architecture, interface considerations, drop-in family options, and practical selection guidance into an engineering-focused reference for designers evaluating the AD673JN for new or legacy data-acquisition equipment.
Bộ thay thế dễ dàng lắp đặt cho AD673JN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD673JN (cùng hình factor và footprint) — khác nhau ở Package.
AD673JNZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD673JD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD673SD/883B
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD673J
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AD673JN Tỷ lệ tối đa & tính chất điện
| Converter Type | 8-bit successive-approximation ADC |
| Độ phân giải | 8 bit |
| Maximum Conversion Time | 30 us |
| Input Type | Unipolar and bipolar |
| Missing Codes | No missing codes over temperature |
| Positive Supply Voltage | +5 V |
| Negative Supply Voltage | -12 V or -15 V |
| Microprocessor Interface | Full-byte or 16-bit parallel bus |
| Integrated Functions | DAC, voltage reference, clock, comparator, SAR, and three-state output buffers |
| DAC Implementation | Laser-trimmed SiCr thin-film resistor ladder |
| Reference Implementation | Temperature-compensated subsurface Zener reference |
| Logic Implementation | Integrated injection logic (I2L) |
| Hộp | 20-pin plastic DIP |
| Khoảng nhiệt độ hoạt động | 0C to +70C |
| Military Version | AD673/883B version available |
Hướng dẫn cấu hình chân AD673JN 20-pin plastic dip
Cấu hình chân cho AD673JN (20-pin plastic dip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD673JN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD673JN phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Digital Panel Meter, Laboratory Data Acquisition, Embedded Control Platform, Legacy Computer Interface Card, Digital Control and Monitoring.
Industrial Process Measurement
The AD673JN is appropriate for industrial process-monitoring systems that digitize pressure, temperature, level, or flow signals into an 8-bit value for display or control. Its unipolar and bipolar input support allows the same converter architecture to serve different sensor-conditioning signals, while the maximum 30-microsecond conversion time defines the acquisition interval. The integrated reference, clock, DAC, comparator, and SAR reduce the number of external analog functions required around the converter. Designers should use the manufacturer pin-description table to connect the selected input mode, control lines, and tri-state output bus, then confirm that the 0C to +70C grade suits the equipment enclosure and operating environment.
Được đề xuất
Digital Panel Meter
The AD673JN can serve as the measurement engine in a digital panel meter that converts an analog sensor signal and presents the result through a microprocessor-controlled display. Its complete 8-bit conversion architecture eliminates the need for a separate internal DAC, reference, clock, comparator, and SAR, reducing board complexity. A maximum conversion time of 30 microseconds allows the controller to schedule repeated measurements, while unipolar and bipolar inputs support both common positive signals and bipolar conditioned sensor outputs. The design should include suitable input conditioning, supply bypassing, and bus timing that prevents output contention whenever the converter's three-state outputs are enabled.
Được đề xuất
Laboratory Data Acquisition
The AD673JN fits laboratory instruments that acquire slowly changing analog signals and require a deterministic parallel digital interface. Its 8-bit resolution is appropriate for coarse measurements, and the stated maximum conversion time of 30 microseconds supports sequential acquisition of multiple channels when multiplexing is placed outside the converter. The full-byte or 16-bit microprocessor bus interface provides flexibility for legacy instrument architectures, while the integrated clock and voltage reference reduce external support circuitry. For reliable measurements, the analog input must remain within the selected unipolar or bipolar range, and the instrument should account for input settling before each conversion and output-bus turnaround afterward.
Được đề xuất
Embedded Control Platform
The AD673JN can provide a compact measurement input for an embedded controller that must convert an analog process or sensor signal into an 8-bit digital value. The converter's integrated reference, clock, DAC, comparator, SAR, and output buffers make it useful when a legacy controller board has a parallel data port but limited analog support circuitry. Its maximum 30-microsecond conversion time supports deterministic polling, and unipolar or bipolar operation broadens the range of signal-conditioning outputs that can be connected. The controller must correctly control read and chip-select timing, place the converter in a defined state between accesses, and preserve the required +5 V and -15 V supply arrangement.
Được đề xuất
Legacy Computer Interface Card
The AD673JN is suited to restoring or maintaining a legacy computer interface card that expects an 8-bit parallel ADC with tri-state data outputs. The converter supports full-byte or 16-bit microprocessor bus operation, allowing it to participate in systems organized around byte-wide or wider parallel buses. Its integrated reference, clock, and internal conversion functions simplify repair boards compared with a design using separate converter components. Because the AD673JN uses a 20-pin plastic DIP, the card layout must provide adequate clearance for the package and interconnection leads. Signal conditioning, input-range selection, and bus contention control remain critical engineering tasks in this legacy platform.
Được đề xuất
Digital Control and Monitoring
The AD673JN can convert conditioned analog feedback into digital information for a digital control or monitoring system. Its 8-bit resolution may be sufficient for coarse supervisory loops, alarm thresholds, and machine-state monitoring, while the 30-microsecond maximum conversion time provides a predictable upper limit for periodic sampling. Supporting unipolar and bipolar inputs enables the converter to work with different sensor-front-end outputs without changing the converter's resolution. For reliable control behavior, engineers should establish an input-settling interval, synchronize read commands with conversion completion, and include supply bypassing close to the converter. The operating-temperature grade must also be checked against the machine's internal temperature range.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD673JN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD673JNZ | AD673JD | AD673SD/883B |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-pin plastic DIP | 20-pin plastic DIP | 20-pin DIP | 20-pin DIP |
| Converter Type | 8-bit successive-approximation ADC | 8-bit AD673-family ADC | 8-bit AD673-family ADC | 8-bit AD673-family ADC |
Bảo phân biệt quan trọng
- Complete monolithic converter integration (vsAD673JNZ)
- Defined acquisition performance (vsAD673JD)
- Parallel processor interface flexibility (vsAD673SD/883B)
- Commercial-temperature plastic DIP construction (vsAD673SD/883B)
Ghi chú thiết kế
Place the AD673JN close to the analog input network and the controller that owns the parallel bus. Route the analog input away from digital clock and bus traces, use a compact ground-return path, and place input and bypass capacitors near the associated pins. The converter's tri-state outputs should connect only to the intended data bus, with pull-up or pull-down resistors added where a defined disabled state is required by the system interface.
Provide stable +5 V and -15 V rails and decouple both supplies near the device. The +5 V and -12 V or -15 V arrangement is integral to the converter's operation, so do not substitute a single positive rail without re-evaluating the circuit. Confirm startup sequencing, supply tolerances, and the voltage at every power pin against the Analog Devices AD673 datasheet. High-impedance analog input nodes can require additional guarding or shielding to reduce leakage and interference.
Do not treat the 30-microsecond maximum conversion time as the complete system acquisition time. Include input settling, conversion-start delay, chip-select and read-control timing, output access, and bus turnaround around each sample. Avoid changing the multiplexed output state while another bus device drives the same lines. For bipolar measurements, confirm the selected input configuration and sign convention against the pin-description and transfer-characteristic sections of the manufacturer datasheet.
Keep the analog source impedance compatible with the converter's sampling network and provide enough settling time between switching the input and starting conversion. Place the return path for the analog input beside the signal trace where practical, and keep switching-regulator and clock-node return currents from crossing the input reference area. If the source has high impedance, add a suitable buffer or lower-impedance termination rather than relying on extra software averaging to correct an improperly settled conversion.
Thông tin tuân thủ
The AD673/883B family has a MIL-STD-883 option, but no AEC-Q100 qualification statement was identified for AD673JN. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.
