AD744AH - 13 MHz Fast-Settling BiFET Op Amp | Analog Devices
MPN: AD744AH ✓ Hoạt độngAD744AH Tóm tắt
A BiFET operational amplifier is a low-noise input-amplifier category whose field-effect transistor input stage supports high input impedance, low bias currents, and accurate signal amplification. In the broader electronics hierarchy, the AD744AH belongs to operational amplifiers, analog amplifier ICs, and semiconductor signal-conditioning devices. Unlike an audio-output amplifier, it is intended primarily for precision voltage amplification, buffering, filtering, and conversion-system signal conditioning.
The AD744's single-pole response provides rapid large-signal recovery, settling to 0.01% in 500 ns and to 0.0025% in 1.5 microseconds for a 10 V step. A 13 MHz gain-bandwidth product supports accurate operation at moderate signal frequencies, while the specified 0.0003% THD is valuable in high-fidelity audio paths. The AD744B variant is identified as having a 100% tested minimum slew rate of 50 V per microsecond.
For applications requiring wider closed-loop bandwidth, the manufacturer datasheet identifies a gain-bandwidth product greater than 200 MHz when external compensation is used. This dual capability lets engineers use the internally compensated AD744AH for straightforward precision-buffer and fixed-gain designs while considering compensated versions or external compensation strategies for substantially faster feedback networks. Laser wafer drift trimming supports production consistency in precision applications.
Typical uses include buffering 12-bit, 14-bit, and 16-bit DACs and ADCs, active analog filters, audio preamplification, sample-and-hold signal conditioning, and precision instrumentation. The fast settling behavior is particularly valuable when a converter must acquire or resolve a new analog level before the next sampling interval, while the TO-99 metal package provides a mechanically robust option for through-hole assembly.
When designing a PCB around the AD744AH, preserve short feedback paths and place input and compensation components close to the relevant pins. Check the gain-bandwidth, slew-rate, output-swing, and stability limits in the manufacturer datasheet for the selected circuit topology. The TO-99 package requires adequate lead spacing and through-hole clearance, so verify the land pattern against the mechanical drawing before layout release.
This page organizes the manufacturer's electrical characteristics, package information, qualification options, precision-buffer use cases, and same-family alternatives into an engineering selection reference. It also identifies package-matching constraints that help distinguish a true drop-in choice from variants requiring a different footprint or different electrical performance.
Bộ thay thế dễ dàng lắp đặt cho AD744AH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
AD744AHZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD744AH Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Precision, fast-settling BiFET operational amplifier |
| Gain-Bandwidth Product | 13 MHz |
| Settling Time to 0.01% | 500 ns for a 10 V step |
| Settling Time to 0.0025% | 1.5 us for a 10 V step |
| Minimum Slew Rate | 50 V/us for AD744B |
| Total Harmonic Distortion | 0.0003% |
| External-Compensation Gain-Bandwidth Product | >200 MHz |
| Signal Response | Single-pole response |
| Input Stage | FET input |
| Supported Converter Resolution | 12-bit, 14-bit, or 16-bit DACs and ADCs |
| Hộp | 8-pin TO-99 metal can |
| Kiểu lắp đặt | Through-hole |
| Trim Technology | Laser wafer drift trimming |
| Available Packaging | 8-pin plastic mini-DIP, 8-pin small outline, 8-pin cerdip, and TO-99 metal can |
| PLUS Screening | 168-hour burn-in with additional environmental and physical tests |
Hướng dẫn cấu hình chân AD744AH 8-pin to-99 metal can
Cấu hình chân cho AD744AH (8-pin to-99 metal can gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD744AH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD744AH phù hợp cho 6 Áp dụngs: 16-Bit DAC Output Buffer, High-Resolution ADC Input Conditioning, Precision Audio Preamplifier, Active Precision Filter, Sample-and-Hold Signal Conditioning, Industrial Instrumentation Amplifier.
16-Bit DAC Output Buffer
The AD744AH is suitable for driving the output of a 16-bit DAC when low distortion and rapid settling are required. Its 13 MHz gain-bandwidth product provides more than sufficient bandwidth for many baseband audio and control signals, while 500 ns settling to 0.01% reduces the time required after a large code transition. According to the Analog Devices AD744 datasheet, the amplifier is specifically identified for buffering 12-bit, 14-bit, and 16-bit DACs. Use it as a voltage follower when the DAC requires low capacitive drive current, and verify output-current and capacitive-load limits for the selected converter and resistor network.
Được đề xuất
High-Resolution ADC Input Conditioning
The AD744AH can provide input buffering and isolated gain for 12-bit, 14-bit, or 16-bit ADC front ends. Its 0.0003% THD limits distortion added to the analog signal, and the 13 MHz gain-bandwidth product supports moderate-frequency conditioning rather than only static precision. The 500 ns settling specification is particularly useful when each conversion cycle must begin shortly after an input change. Check source impedance, ADC input capacitance, gain error, and acquisition time together because bandwidth alone does not guarantee complete converter resolution.
Được đề xuất
Precision Audio Preamplifier
The AD744AH fits precision audio preamplifier and line-stage circuits where low distortion is valuable. Its 0.0003% THD and 13 MHz gain-bandwidth product provide a favorable combination of signal purity and bandwidth for demanding audio paths. The 500 ns large-signal settling characteristic also allows the stage to recover quickly after a transient, although an audio design should still consider noise density, input bias current, and output-load compatibility. The FET-input architecture helps preserve high source impedance, making the device relevant to microphone and instrumentation preamplifiers operating at low bias current.
Được đề xuất
Active Precision Filter
The AD744AH is appropriate for active filters that need accurate settling and moderate bandwidth. Its 13 MHz gain-bandwidth product gives ample loop gain for common low-frequency precision-filter stages, while the 500 ns settling response helps suppress transient errors after a filter input changes. According to the Analog Devices AD744 datasheet, externally compensated configurations can provide a gain-bandwidth product greater than 200 MHz. Use that capability only when the selected external compensation network, feedback topology, and stability requirements are supported by the device data.
Được đề xuất
Sample-and-Hold Signal Conditioning
The AD744AH can buffer the output of a sample-and-hold stage or conditioning network where the next measurement follows quickly after acquisition. The amplifier settles to 0.01% in 500 ns and 0.0025% in 1.5 microseconds for a 10 V step, reducing the interval required before a precise measurement can begin. Its single-pole response supports this fast recovery, while the precision BiFET input stage supports high-impedance sources. Validate switch charge injection, source resistance, and settling accuracy before using the amplifier with a specific sample-and-hold architecture.
Được đề xuất
Industrial Instrumentation Amplifier
The AD744AH supports precision instrumentation stages that amplify low-level sensor signals while requiring low bias current and fast recovery. The FET input is appropriate for high-impedance transducers, and 13 MHz bandwidth is more than adequate for many process-control and laboratory signals below the sensor's useful frequency range. The 0.0003% THD specification helps preserve waveform integrity, while rapid settling improves recovery after a range change. A practical design must also verify input noise density, common-mode range, output swing, and supply-voltage limits for the selected gain and sensor.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD744AH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD744AHZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin TO-99 metal can | 8-pin TO-99 metal can |
| Amplifier Architecture | Precision, fast-settling monolithic BiFET operational amplifier | AD744 family precision BiFET operational amplifier |
| Gain-Bandwidth Product | 13 MHz | 13 MHz |
| Settling to 0.01% | 500 ns for a 10 V step | 500 ns for a 10 V step |
| Settling to 0.0025% | 1.5 us for a 10 V step | 1.5 us for a 10 V step |
| Total Harmonic Distortion | 0.0003% | 0.0003% |
| External-Compensation Gain-Bandwidth Product | >200 MHz | >200 MHz |
| Input Stage | FET input | FET input |
| Supported Converter Resolution | 12-bit, 14-bit, and 16-bit DACs and ADCs | 12-bit, 14-bit, and 16-bit DACs and ADCs |
Bảo phân biệt quan trọng
- Fast precision settling (vsAD744AHZ)
- Low distortion for precision signal paths (vsAD744AHZ)
- Choice of compensation bandwidth (vsAD744AHZ)
Ghi chú thiết kế
Keep the feedback loop physically short and place feedback resistors close to the AD744AH pins. A compact loop reduces parasitic inductance and capacitance that can alter stability or settling. Connect the non-inverting input directly to the feedback junction where practical, and route the output separately so high-current output traces do not share impedance with the precision input and feedback nodes.
Do not assume that 13 MHz gain-bandwidth product permits a 13 MHz closed-loop bandwidth at every gain and noise-gain setting. The usable bandwidth depends on the selected gain, feedback values, load, and compensation method. Review the closed-loop response and stability plots in the Analog Devices AD744 datasheet before selecting unusually high closed-loop bandwidth or adding external compensation.
For the AD744AH TO-99 package, preserve adequate clearance between the metal-can body, leads, and surrounding copper or conductive hardware. Follow the manufacturer's package outline for hole size, lead pitch, and mechanical tolerances. Provide thermal relief at grounded pins as appropriate, avoid accidental shorts to the can, and consider the thermal path from the package into the board or chassis when dissipating meaningful power.
Thông tin tuân thủ
The Analog Devices AD744 product page identifies PLUS screening over commercial and industrial temperature ranges, including 168-hour burn-in and additional environmental and physical tests. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation for the exact ordering code.