AD744AH - 13 MHz Fast-Settling BiFET Op Amp | Analog Devices
料号: AD744AH ✓ 量产中AD744AH 概述
A BiFET operational amplifier is a low-noise input-amplifier category whose field-effect transistor input stage supports high input impedance, low bias currents, and accurate signal amplification. In the broader electronics hierarchy, the AD744AH belongs to operational amplifiers, analog amplifier ICs, and semiconductor signal-conditioning devices. Unlike an audio-output amplifier, it is intended primarily for precision voltage amplification, buffering, filtering, and conversion-system signal conditioning.
The AD744's single-pole response provides rapid large-signal recovery, settling to 0.01% in 500 ns and to 0.0025% in 1.5 microseconds for a 10 V step. A 13 MHz gain-bandwidth product supports accurate operation at moderate signal frequencies, while the specified 0.0003% THD is valuable in high-fidelity audio paths. The AD744B variant is identified as having a 100% tested minimum slew rate of 50 V per microsecond.
For applications requiring wider closed-loop bandwidth, the manufacturer datasheet identifies a gain-bandwidth product greater than 200 MHz when external compensation is used. This dual capability lets engineers use the internally compensated AD744AH for straightforward precision-buffer and fixed-gain designs while considering compensated versions or external compensation strategies for substantially faster feedback networks. Laser wafer drift trimming supports production consistency in precision applications.
Typical uses include buffering 12-bit, 14-bit, and 16-bit DACs and ADCs, active analog filters, audio preamplification, sample-and-hold signal conditioning, and precision instrumentation. The fast settling behavior is particularly valuable when a converter must acquire or resolve a new analog level before the next sampling interval, while the TO-99 metal package provides a mechanically robust option for through-hole assembly.
When designing a PCB around the AD744AH, preserve short feedback paths and place input and compensation components close to the relevant pins. Check the gain-bandwidth, slew-rate, output-swing, and stability limits in the manufacturer datasheet for the selected circuit topology. The TO-99 package requires adequate lead spacing and through-hole clearance, so verify the land pattern against the mechanical drawing before layout release.
This page organizes the manufacturer's electrical characteristics, package information, qualification options, precision-buffer use cases, and same-family alternatives into an engineering selection reference. It also identifies package-matching constraints that help distinguish a true drop-in choice from variants requiring a different footprint or different electrical performance.
直接替换替代料: AD744AH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD744AHZ
✅ 直接替换📋 参考替代料(不在目录中)
AD744AH 最大额定值与电气特性
| Amplifier Type | Precision, fast-settling BiFET operational amplifier |
| Gain-Bandwidth Product | 13 MHz |
| Settling Time to 0.01% | 500 ns for a 10 V step |
| Settling Time to 0.0025% | 1.5 us for a 10 V step |
| Minimum Slew Rate | 50 V/us for AD744B |
| Total Harmonic Distortion | 0.0003% |
| External-Compensation Gain-Bandwidth Product | >200 MHz |
| Signal Response | Single-pole response |
| Input Stage | FET input |
| Supported Converter Resolution | 12-bit, 14-bit, or 16-bit DACs and ADCs |
| 封装 | 8-pin TO-99 metal can |
| 安装类型 | Through-hole |
| Trim Technology | Laser wafer drift trimming |
| Available Packaging | 8-pin plastic mini-DIP, 8-pin small outline, 8-pin cerdip, and TO-99 metal can |
| PLUS Screening | 168-hour burn-in with additional environmental and physical tests |
AD744AH 8-pin to-99 metal can 引脚配置指南
AD744AH(8-pin to-99 metal can 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD744AH.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD744AH 适用于 6 应用s: 16-Bit DAC Output Buffer, High-Resolution ADC Input Conditioning, Precision Audio Preamplifier, Active Precision Filter, Sample-and-Hold Signal Conditioning, Industrial Instrumentation Amplifier.
16-Bit DAC Output Buffer
The AD744AH is suitable for driving the output of a 16-bit DAC when low distortion and rapid settling are required. Its 13 MHz gain-bandwidth product provides more than sufficient bandwidth for many baseband audio and control signals, while 500 ns settling to 0.01% reduces the time required after a large code transition. According to the Analog Devices AD744 datasheet, the amplifier is specifically identified for buffering 12-bit, 14-bit, and 16-bit DACs. Use it as a voltage follower when the DAC requires low capacitive drive current, and verify output-current and capacitive-load limits for the selected converter and resistor network.
推荐
High-Resolution ADC Input Conditioning
The AD744AH can provide input buffering and isolated gain for 12-bit, 14-bit, or 16-bit ADC front ends. Its 0.0003% THD limits distortion added to the analog signal, and the 13 MHz gain-bandwidth product supports moderate-frequency conditioning rather than only static precision. The 500 ns settling specification is particularly useful when each conversion cycle must begin shortly after an input change. Check source impedance, ADC input capacitance, gain error, and acquisition time together because bandwidth alone does not guarantee complete converter resolution.
推荐
Precision Audio Preamplifier
The AD744AH fits precision audio preamplifier and line-stage circuits where low distortion is valuable. Its 0.0003% THD and 13 MHz gain-bandwidth product provide a favorable combination of signal purity and bandwidth for demanding audio paths. The 500 ns large-signal settling characteristic also allows the stage to recover quickly after a transient, although an audio design should still consider noise density, input bias current, and output-load compatibility. The FET-input architecture helps preserve high source impedance, making the device relevant to microphone and instrumentation preamplifiers operating at low bias current.
推荐
Active Precision Filter
The AD744AH is appropriate for active filters that need accurate settling and moderate bandwidth. Its 13 MHz gain-bandwidth product gives ample loop gain for common low-frequency precision-filter stages, while the 500 ns settling response helps suppress transient errors after a filter input changes. According to the Analog Devices AD744 datasheet, externally compensated configurations can provide a gain-bandwidth product greater than 200 MHz. Use that capability only when the selected external compensation network, feedback topology, and stability requirements are supported by the device data.
推荐
Sample-and-Hold Signal Conditioning
The AD744AH can buffer the output of a sample-and-hold stage or conditioning network where the next measurement follows quickly after acquisition. The amplifier settles to 0.01% in 500 ns and 0.0025% in 1.5 microseconds for a 10 V step, reducing the interval required before a precise measurement can begin. Its single-pole response supports this fast recovery, while the precision BiFET input stage supports high-impedance sources. Validate switch charge injection, source resistance, and settling accuracy before using the amplifier with a specific sample-and-hold architecture.
推荐
Industrial Instrumentation Amplifier
The AD744AH supports precision instrumentation stages that amplify low-level sensor signals while requiring low bias current and fast recovery. The FET input is appropriate for high-impedance transducers, and 13 MHz bandwidth is more than adequate for many process-control and laboratory signals below the sensor's useful frequency range. The 0.0003% THD specification helps preserve waveform integrity, while rapid settling improves recovery after a range change. A practical design must also verify input noise density, common-mode range, output swing, and supply-voltage limits for the selected gain and sensor.
推荐
推荐产品汇总
工程参考数据: AD744AH ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD744AHZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin TO-99 metal can | 8-pin TO-99 metal can |
| Amplifier Architecture | Precision, fast-settling monolithic BiFET operational amplifier | AD744 family precision BiFET operational amplifier |
| Gain-Bandwidth Product | 13 MHz | 13 MHz |
| Settling to 0.01% | 500 ns for a 10 V step | 500 ns for a 10 V step |
| Settling to 0.0025% | 1.5 us for a 10 V step | 1.5 us for a 10 V step |
| Total Harmonic Distortion | 0.0003% | 0.0003% |
| External-Compensation Gain-Bandwidth Product | >200 MHz | >200 MHz |
| Input Stage | FET input | FET input |
| Supported Converter Resolution | 12-bit, 14-bit, and 16-bit DACs and ADCs | 12-bit, 14-bit, and 16-bit DACs and ADCs |
关键差异点
- Fast precision settling (对比 AD744AHZ)
- Low distortion for precision signal paths (对比 AD744AHZ)
- Choice of compensation bandwidth (对比 AD744AHZ)
设计说明
Keep the feedback loop physically short and place feedback resistors close to the AD744AH pins. A compact loop reduces parasitic inductance and capacitance that can alter stability or settling. Connect the non-inverting input directly to the feedback junction where practical, and route the output separately so high-current output traces do not share impedance with the precision input and feedback nodes.
Do not assume that 13 MHz gain-bandwidth product permits a 13 MHz closed-loop bandwidth at every gain and noise-gain setting. The usable bandwidth depends on the selected gain, feedback values, load, and compensation method. Review the closed-loop response and stability plots in the Analog Devices AD744 datasheet before selecting unusually high closed-loop bandwidth or adding external compensation.
For the AD744AH TO-99 package, preserve adequate clearance between the metal-can body, leads, and surrounding copper or conductive hardware. Follow the manufacturer's package outline for hole size, lead pitch, and mechanical tolerances. Provide thermal relief at grounded pins as appropriate, avoid accidental shorts to the can, and consider the thermal path from the package into the board or chassis when dissipating meaningful power.
合规信息
The Analog Devices AD744 product page identifies PLUS screening over commercial and industrial temperature ranges, including 168-hour burn-in and additional environmental and physical tests. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation for the exact ordering code.