Analog Devices

AD7492BRZ - 12-Bit 1 MSPS SAR ADC | Analog Devices

MPN: AD7492BRZ ✓ Hoạt động
2.7 V to 5.25 V Vdss 24-lead SOIC, MS-013AD Package Internal clock Speed
MOQ: 1 |

AD7492BRZ Tóm tắt

The Analog Devices AD7492BRZ is a 12-bit, single-input, successive-approximation analog-to-digital converter in a 24-lead SOIC package. The AD7492 operates from a 2.7 V to 5.25 V supply, converts at up to 1 MSPS, and consumes approximately 4 mW at that rate. Its input range is 0 V to 2.5 V, making it suitable for precision acquisition systems that require compact, low-power SAR conversion.

A successive-approximation ADC, or SAR ADC, repeatedly compares the analog input with a generated reference voltage and adjusts a binary-weighted internal DAC until the comparator output changes state. This architecture combines predictable conversion latency with low power consumption and moderate resolution. The AD7492 belongs to the ADC hierarchy of data-converter ICs, providing a practical bridge between a continuously varying sensor signal and a digital value produced by a microcontroller, DSP, or programmable logic controller.

The AD7492BRZ provides a 12-bit conversion result, one analog input channel, an internal reference and clock, and a low-power operating mode. According to the manufacturer product information, the AD7492 family includes AD7492, AD7492-4, and AD7492-5 variants with maximum throughput rates of 1 MSPS, 400 kSPS, and 1.25 MSPS respectively. The target AD7492 variant therefore balances conversion speed against power consumption while retaining a 12-bit output resolution.

The device uses a conversion-controlled SAR architecture without pipeline delay. The BUSY indication rises at the start of conversion and falls 880 ns later for the AD7492 and AD7492-4 variants to signal completion. This deterministic behavior supports software-controlled acquisition, but it also means the host processor must observe conversion timing or use the BUSY signal when transferring each 12-bit result. The internal reference and clock reduce external component count in compact instrumentation designs.

Typical uses include industrial process monitoring, temperature and pressure sensor acquisition, battery-powered measurement instruments, motor and power-system monitoring, laboratory data acquisition, and embedded control systems. The 24-lead SOIC package provides a conventional surface-mount option, while the 2.7 V to 5.25 V operating supply supports both 3.3 V and 5 V systems. The industrial-grade temperature range extends from -40 °C to 85 °C.

Designers should treat the analog input as a high-impedance sampling node and use the pin-description and application-circuit guidance in the manufacturer datasheet when assigning traces and external components. Reference and supply bypassing must follow the recommended values and placement, because settling time at the input directly affects conversion accuracy. Digital output timing should also be checked against the host interface requirements before fixing the acquisition rate.

This page combines the AD7492 family specifications, package information, commercial sourcing details, and engineering guidance with a focus on practical selection. It also distinguishes the standard AD7492 from its lower-speed and higher-speed family variants, helping designers choose the correct member without confusing throughput differences with pin compatibility.

Bộ thay thế dễ dàng lắp đặt cho AD7492BRZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD7492BRZ (cùng hình factor và footprint) — khác nhau ở Package.

Analog Devices
Package: 24-pin SOIC
So sánh với AD7492BRZ →

AD7492BRZ-5

✅ Drop-In
📦 24-lead SOIC, MS-013AD
Maximum throughput increases from 1 MSPS to 1.25 MSPS, a 25% increase; resolution remains 12 bit

📋 Tham chiếu thay thế (không có trong danh mục)

AD7492-4

✅ Drop-In
📦 24-lead SOIC, MS-013AD
Maximum throughput decreases from 1 MSPS to 400 kSPS, a 60% reduction; resolution remains 12 bit

📋 Tham chiếu thay thế (không có trong danh mục)

AD7492-5

✅ Drop-In
📦 24-lead SOIC, MS-013AD
Maximum throughput increases from 1 MSPS to 1.25 MSPS, a 25% increase; 12-bit SAR architecture is retained

📋 Tham chiếu thay thế (không có trong danh mục)

AD7492BRZ Tỷ lệ tối đa & tính chất điện

Độ phân giải 12 bit
Architecture Successive approximation (SAR)
Input Channels 1 analog input
Maximum Throughput, AD7492 1 MSPS
Maximum Throughput, AD7492-5 1.25 MSPS
Maximum Throughput, AD7492-4 400 kSPS
Supply Voltage Range 2.7 V to 5.25 V
Phạm vi điện áp đầu vào 0 V to 2.5 V
Typical Power Consumption 4 mW at 1 MSPS
Reference Internal reference
Clock Internal clock
Conversion Complete Timing BUSY deasserts 880 ns after conversion start for AD7492 and AD7492-4
Pipeline Delay 0 cycles (no pipeline delay)
Hộp 24-lead SOIC, MS-013AD
Số chân 24 pins
Kiểu lắp đặt Surface mount
Nhiệt độ hoạt động -40 °C to 85 °C
Screening Level Industrial

Hướng dẫn cấu hình chân AD7492BRZ 24-lead soic, ms-013ad

Cấu hình chân cho AD7492BRZ (24-lead soic, ms-013ad gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 24-lead soic, ms-013ad cho AD7492BRZ

Không có dữ liệu chân cụ thể sẵn có cho AD7492BRZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD7492BRZ phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Temperature and Pressure Sensor Acquisition, Battery-Powered Measurement Instruments, Motor and Power-System Monitoring, Laboratory and Data-Acquisition Systems, Embedded Control and Sensor Interfaces.

🏭

Industrial Process Monitoring

The AD7492BRZ suits industrial process-monitoring channels that must digitize a restricted analog input range at moderate speed. Its 12-bit resolution provides 4096 discrete codes, while the 0 V to 2.5 V input range suits conditioned outputs from current-to-voltage converters, resistive bridges, and industrial sensor transmitters. The 1 MSPS rate also provides more headroom than many process signals require, allowing the system to sample multiple conditioning channels sequentially when the host controls multiplexing. Operation from a single 2.7 V to 5.25 V supply simplifies field-instrument power architecture, and the -40 °C to 85 °C industrial range supports controlled cabinets and production equipment. Place the analog trace away from digital outputs and follow the manufacturer’s recommended bypass and reference layout to preserve accuracy.

🌡️

Temperature and Pressure Sensor Acquisition

The AD7492BRZ is appropriate for digitizing conditioned outputs from RTDs, thermocouple amplifiers, pressure transmitters, and digital temperature sensors exposed through analog interfaces. A 12-bit converter provides sufficient resolution for many slow-changing industrial measurements, while the 1 MSPS capability allows the acquisition system to oversample relative to the sensor’s thermal settling time. The internal reference and clock reduce the external support circuitry needed in a compact measurement module. Because sensor excitation and bridge currents can inject noise through shared ground paths, route the AD7492BRZ analog input and reference connections away from switching nodes and digital output edges. Use the manufacturer application guidance for input-source impedance, acquisition timing, and bypass placement.

🔋

Battery-Powered Measurement Instruments

The AD7492BRZ fits portable and battery-powered measurement equipment where a 12-bit measurement channel must consume little power and board area. Typical power consumption is approximately 4 mW at 1 MSPS, while the 24-lead SOIC package can be placed on a compact mixed-signal board. The 2.7 V lower supply limit supports systems operated from a single Li-ion cell with a low-voltage regulator, and the 5.25 V upper limit accommodates 5 V industrial rails. In portable designs, the internal reference and clock are valuable because they reduce component count, but their use does not remove the need for careful analog grounding. Trigger conversions only when useful samples are required and disable unused outputs where the selected architecture permits it to reduce switching activity.

⚡

Motor and Power-System Monitoring

The AD7492BRZ can serve as the ADC in current, voltage, or position-feedback subsystems for motors and power converters when the sensed signal is conditioned into the 0 V to 2.5 V input range. The 1 MSPS rate is well matched to many supervisory loops that monitor current magnitude, DC-link conditions, or mechanical position without requiring a high-resolution waveform capture. The non-pipelined SAR conversion provides a defined completion event through the BUSY signal, allowing a controller to coordinate conversion with PWM updates and fault handling. Keep the analog front end close to the converter and avoid routing shunt or power-stage signals beneath the SOIC. Validate timing against the switching node because the ADC timing specification does not replace the system’s analog settling requirements.

🖥️

Laboratory and Data-Acquisition Systems

The AD7492BRZ is appropriate for compact laboratory and field data-acquisition modules that need a deterministic 12-bit SAR channel rather than a continuous-output pipeline ADC. The 1 MSPS conversion rate can capture events at a useful sampling rate, while the internal reference and clock simplify module-level synchronization. Because the device has no pipeline delay, the controller can issue a conversion and wait for BUSY before reading the parallel result. For instrumentation requiring multiple inputs, the single analog channel means multiplexing or an external analog switch is needed, and each switched source must be allowed to settle before conversion. Use the official AD7492 datasheet for the electrical interface, digital timing, and input-conditioning requirements.

🧩

Embedded Control and Sensor Interfaces

The AD7492BRZ can connect a conditioned analog sensor to a microcontroller, DSP, or programmable logic controller that requires a 12-bit digital measurement. Its 1 MSPS rate is more than adequate for many thermal, level, pressure, and position sensors, while the internal clock and reference support a self-contained acquisition channel. The deterministic BUSY indication simplifies firmware sequencing because no pipeline-stage tracking is required. Interface the digital outputs according to the host’s voltage levels and ensure the acquisition interval leaves sufficient time for analog settling. For battery-operated devices, operate the ADC and controller from a common low-noise rail where practical, and test the complete signal chain because reference noise, source impedance, and layout can determine the usable resolution more than the nominal bit count.

Tóm tắt các sản phẩm được đề xuất

AD7492-4 Lower-speed family member for slower process-monitoring loops Được sử dụng trong: Industrial Process Monitoring AD7492BRZ-5 Higher-throughput family option for faster monitoring loops Được sử dụng trong: Motor and Power-System Monitoring
What is the AD7492BRZ?
The AD7492BRZ is a 12-bit, single-channel, successive-approximation ADC from Analog Devices in a 24-lead SOIC package. The standard AD7492 performs conversions at up to 1 MSPS from a 2.7 V to 5.25 V supply and accepts an input voltage from 0 V to 2.5 V. According to the Analog Devices AD7492 product information, it also includes an internal reference and clock, making it suitable for compact embedded measurement systems.
What is the conversion rate of the AD7492BRZ?
The AD7492BRZ converts at up to 1 MSPS, or 1,000,000 samples per second. The AD7492 family reaches 1.25 MSPS in the AD7492-5 variant and 400 kSPS in the AD7492-4 variant. Analog Devices lists typical AD7492 power consumption of 4 mW at 1 MSPS. Select the family member according to both the required sampling rate and the host system's data-handling capability.
What supply voltage does the AD7492BRZ require?
The AD7492BRZ operates from a single 2.7 V to 5.25 V supply, allowing use in both 3.3 V and 5 V equipment. The stated analog input range is 0 V to 2.5 V. According to the Analog Devices AD7492 family information, low-noise, wide-bandwidth internal circuitry supports accurate conversion across this supply range. Use the manufacturer application circuit for recommended supply-decoupling and reference-bypass components.
Where can I download the AD7492BRZ datasheet?
The official AD7492BRZ datasheet and product information are available from the Analog Devices AD7492 product page at analog.com. The family documentation covers electrical characteristics, the pin-description table, conversion timing, and application circuits for the AD7492, AD7492-4, and AD7492-5 versions. Use the same document when checking the BRZ package markings and the exact ordering-code interpretation.
What is the pinout of the AD7492BRZ?
The AD7492BRZ uses a 24-lead SOIC, MS-013AD, package. Assign PCB nets using the pin-description table and package drawings in the official Analog Devices AD7492 datasheet rather than relying on a generic SOIC pin map. The converter includes analog input, reference, supply, ground, clock, conversion-control, busy-state, and digital data functions, so correct signal grouping is essential to preserve conversion accuracy.
Is the AD7492BRZ a drop-in replacement for the AD7492BRZ-5?
The AD7492BRZ and AD7492BRZ-5 belong to the same AD7492 family and use the 24-lead SOIC format, but they do not have identical throughput. The standard AD7492 reaches 1 MSPS while the AD7492-5 reaches 1.25 MSPS, a 25% increase. The AD7492BRZ-5 is therefore a close functional upgrade when the PCB, interface timing, acquisition rate, and supply arrangement are compatible.
What is the difference between AD7492BRZ and AD7492-4?
The AD7492BRZ converts at up to 1 MSPS, while the AD7492-4 variant converts at up to 400 kSPS. This makes the AD7492-4 approximately 60% slower than the standard part while retaining the family's 12-bit SAR architecture, supply range, internal reference, and internal clock. Choose AD7492-4 when lower conversion activity or slower sampling is preferable, and choose AD7492BRZ when 1 MSPS throughput is required.
What can replace the AD7492BRZ?
The closest documented replacement is the AD7492BRZ-5 when a higher-throughput version of the same family is acceptable. It retains the 12-bit SAR conversion format and 24-lead SOIC package while increasing the maximum rate from 1 MSPS to 1.25 MSPS. Because timing and acquisition requirements change with that rate increase, confirm host-interface timing, power characteristics, and PCB connectivity before substituting it.
What is the best Analog Devices equivalent for the AD7492BRZ?
The AD7492-4 is the closest lower-speed Analog Devices equivalent in the same AD7492 family, while the AD7492BRZ-5 is the closest higher-speed option. Both preserve the family's 12-bit SAR architecture and low-power operating concept. Selection depends on whether the design needs 400 kSPS, the standard 1 MSPS, or 1.25 MSPS throughput rather than on package interchangeability alone.
When should I choose the AD7492BRZ over the AD7492BRZ-5?
Choose the AD7492BRZ when 1 MSPS is sufficient and the system does not need the additional 250,000 conversions per second offered by the AD7492BRZ-5. The standard part is the better match when conversion speed is not the bottleneck, power activity should remain modest, or the acquisition cycle is already limited by sensor settling and host processing. Use the AD7492BRZ-5 when the extra throughput has a clear system benefit.
Is the AD7492BRZ suitable for industrial temperature operation?
Yes, the AD7492BRZ is specified for industrial screening with an operating temperature range of -40 °C to 85 °C. It is therefore appropriate for industrial instrumentation, process monitoring, and embedded control equipment that remains within this range. For designs exposed to greater temperature extremes or severe automotive requirements, confirm the specific ordering code's qualification rather than assuming industrial screening is sufficient.
Does the AD7492BRZ have pipeline delay?
No, the AD7492BRZ has no pipeline delay. The manufacturer states that the BUSY pin goes high at the start of conversion and goes low 880 ns later for the AD7492 and AD7492-4 variants to indicate completion. This deterministic, non-pipelined behavior makes the timing straightforward for a host controller, but sampled data must still be read only after conversion completion.
How much power does the AD7492BRZ consume?
The AD7492BRZ consumes approximately 4 mW at 1 MSPS under the stated operating conditions. Its 2.7 V to 5.25 V single-supply operation supports low-power embedded acquisition, and the 12-bit SAR architecture avoids the higher conversion power associated with many continuous-output high-speed data converters. Actual board consumption also depends on supply voltage, digital output activity, and the external interface.
How do I use the BUSY signal with the AD7492BRZ?
Use BUSY as a conversion-status handshake with the controller or logic device. The BUSY signal goes high when conversion begins and goes low 880 ns after the start of a standard AD7492 conversion to indicate that the result is ready. Since the converter has no pipeline delay, the host should not transfer or interpret the output bus until BUSY has been deasserted, following the exact timing shown in the manufacturer datasheet.
Where can I buy the AD7492BRZ and what is its lead time?
Use the Request a Quote form on this page to request current AD7492BRZ availability, commercial terms, and lead time from XAIPART. The request should identify the 24-lead SOIC ordering code AD7492BRZ and any required quantity or date commitment. Because distributor inventory and production schedules change continuously, confirm the current allocation directly rather than relying on historical catalog availability.

Dữ liệu tham khảo kỹ thuật cho AD7492BRZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD7492BRZ when the design needs a 12-bit SAR channel with up to 1 MSPS throughput, a 0 V to 2.5 V input range, and operation from 2.7 V to 5.25 V. It is a strong fit for industrial sensors, process-monitoring channels, and embedded control systems where a deterministic conversion result and internal reference and clock are more valuable than maximum conversion rate. Select AD7492-4 when 400 kSPS is sufficient and lower activity is desirable. Select AD7492BRZ-5 or AD7492-5 when the acquisition loop benefits from 1.25 MSPS throughput, recognizing that BUSY timing changes from 880 ns to 680 ns. The alternatives share the same family architecture and package format, but final substitution still requires checking the exact ordering code, PCB connections, timing, and acquisition-cycle requirements.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD7492BRZ-5 AD7492-4 AD7492-5
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-lead SOIC, MS-013AD 24-lead SOIC, MS-013AD 24-lead SOIC, MS-013AD 24-lead SOIC, MS-013AD
Resolution 12 bit 12 bit 12 bit 12 bit
Maximum Throughput 1 MSPS 1.25 MSPS 400 kSPS 1.25 MSPS
Architecture 12-bit SAR ADC 12-bit SAR ADC 12-bit SAR ADC 12-bit SAR ADC
Input Channels 1 1 1 1
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Input Voltage Range 0 V to 2.5 V 0 V to 2.5 V 0 V to 2.5 V 0 V to 2.5 V
BUSY Completion Timing 880 ns after conversion start 680 ns after conversion start 880 ns after conversion start 680 ns after conversion start

Bảo phân biệt quan trọng

  • Balanced conversion speed and power in the standard family member (vsAD7492-4)
  • Higher throughput is available without changing resolution (vsAD7492BRZ-5)
  • Complete integrated conversion support for compact designs (vsAD7492-4)

Ghi chú thiết kế

Treat the analog input, reference, and supply paths as one compact signal-conditioning group on the PCB. Follow the manufacturer application circuit for input-source impedance, filtering, and bypass capacitors, and place the recommended capacitors directly beside their associated pins. Keep the analog trace short and away from the digital output bus, clock edge, and any switching-node copper. A clean reference return is as important as a short input trace because reference disturbance can appear directly in the conversion result.

The standard AD7492 uses a deterministic, non-pipelined conversion sequence, so software and hardware should wait for BUSY to be deasserted before reading the output data. The BUSY interval is 880 ns for the AD7492, while the -5 variant deasserts BUSY after 680 ns. If the host operates from a different clock domain, synchronize control and output signals appropriately and test setup and hold timing against the host device rather than assuming that nominal processor timing is sufficient.

Budget approximately 4 mW for the AD7492 at 1 MSPS and design the supply for both analog and digital requirements. Place local decoupling at the supply pins with the values and layout specified by Analog Devices, and route the return current directly to the appropriate ground pins. Because the family supports 2.7 V to 5.25 V operation, confirm that the selected voltage preserves the required input range, output logic levels, reference behavior, and timing margin across the complete operating temperature range.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The AD7492BRZ is an industrial-screened 24-lead SOIC component. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established for the exact ordering code and are therefore left unknown.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD7492BRZ datasheet AD7492BRZ specifications AD7492BRZ pinout AD7492BRZ datasheet pdf Analog Devices AD7492BRZ AD7492 24-SOIC ADC AD7492 1 MSPS ADC AD7492BRZ vs AD7492BRZ-5 AD7492BRZ equivalent AD7492BRZ replacement AD7492BRZ price AD7492BRZ stock AD7492BRZ application circuit AD7492 SAR ADC replacement

Các bộ phận và thuật ngữ liên quan

Analog Devices AD7492 AD7492BRZ AD7492BRZ-5 AD7492-4 AD7492-5 AD7492 family analog-to-digital converter ADC successive approximation ADC SAR architecture 12-bit resolution single analog input 1 MSPS 1.25 MSPS 400 kSPS internal reference internal clock BUSY conversion signal no pipeline delay 2.7 V to 5.25 V supply 24-lead SOIC MS-013AD industrial temperature range
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ