Analog Devices

AD9611BH - +/-5V Operational Amplifier | Analog Devices

MPN: AD9611BH ✓ Hoạt động
4300 uV Vdss 80 mA Id QIP (MQIP12) Package
MOQ: 1 |

AD9611BH Tóm tắt

The Analog Devices AD9611BH is a single, general-purpose operational amplifier specified for ±5 V power supplies, with a maximum input offset voltage of 4300 uV and maximum supply current of 80 mA. The device is offered in a 12-terminal, square QIP-style through-hole package designated MQIP12, and its specified operating-temperature range is -25°C to +85°C.

An operational amplifier is an analog integrated circuit that amplifies the difference between its differential inputs while providing high input impedance and low output impedance. Within the broader semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and signal-conditioning categories. It is commonly used to buffer sensors, amplify low-level signals, implement active filters, and drive downstream analog circuitry.

The AD9611BH is identified as a hybrid operational amplifier with one amplifier circuit. Its maximum input offset voltage of 4300 uV is the principal characterized input-error specification in the product listing. A ±5 V supply supports applications using dual-polarity rails, while the 80 mA maximum supply-current rating defines the upper limit for device supply demand. The listed 12-terminal package uses through-hole termination and a square QIP form.

The component is suitable for instrumentation-style signal chains that can tolerate its specified offset-voltage range and operate within the -25°C to +85°C temperature interval. It can also be evaluated for general analog conditioning, buffering, and gain-stage functions where the system designer requires dual-rail operation. Because the available technical listing identifies the amplifier category, offset, supply, temperature, and package characteristics, application suitability should be confirmed against the complete manufacturer datasheet before precision measurements or high-gain operation.

Typical circuit roles include low-level signal amplification, impedance isolation between a sensor and a later processing stage, and active-filter implementation around a balanced signal path. The ±5 V operating capability is particularly useful when the signal can swing in either direction. Designers should also account for input offset when calculating accuracy at low signal amplitudes and should verify output-swing, slew-rate, bandwidth, and noise requirements for the intended gain stage.

For a new design, begin by checking the complete pin description and typical application circuit in the manufacturer datasheet. Pay particular attention to offset voltage, common-mode range, output swing, supply current, and stability when driving capacitive loads. A real prototype should also verify that the 12-terminal package is mechanically compatible with the intended through-hole PCB footprint.

This page consolidates the confirmed AD9611BH electrical, environmental, packaging, and commercial information with engineering-focused application guidance. It also distinguishes exact-MPN price evidence from family listings, provides a clear sourcing path for current quotations, and avoids presenting unverified substitute parts as drop-in replacements.

Bộ thay thế dễ dàng lắp đặt cho AD9611BH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

AD9611BH Tỷ lệ tối đa & tính chất điện

Amplifier Type Single general-purpose operational amplifier
Maximum Input Offset Voltage 4300 uV
Điện áp cung cấp +/-5 V
Maximum Supply Current 80 mA
Khoảng nhiệt độ hoạt động -25°C to +85°C
Number of Terminals 12 terminals
Package Code QIP (MQIP12)
Package Shape Square
Kiểu lắp đặt Through-hole
Construction Hybrid
Number of Amplifier Circuits 1 circuit

Hướng dẫn cấu hình chân AD9611BH square

Cấu hình chân cho AD9611BH (square gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân square cho AD9611BH

Không có dữ liệu chân cụ thể sẵn có cho AD9611BH.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD9611BH phù hợp cho 6 Áp dụngs: Precision Analog Signal Conditioning, Sensor Signal Buffering, Active Filter Implementation, Test and Measurement Front End, Industrial Control Signal Interface, Audio and Communication Signal Buffering.

🔧

Precision Analog Signal Conditioning

The AD9611BH can condition low-level analog signals in instrumentation paths that use balanced ±5 V rails. Its confirmed maximum input offset voltage of 4300 uV provides a defined limit for input-referred error, while the single-amplifier configuration makes it suitable for basic gain, buffering, and active-filter stages. Designers should calculate the resulting output error from offset and then confirm bandwidth, slew rate, input bias current, and common-mode limits in the manufacturer datasheet. Prototype the selected gain against the smallest expected input so that offset, bias current, and noise do not obscure the signal of interest.

🧩

Sensor Signal Buffering

The AD9611BH is suitable as a first-stage buffer when a sensor produces a bipolar signal and the downstream circuit requires reduced loading. Its ±5 V supply supports signals centered around ground, while the 4300 uV maximum input offset voltage must be included in the sensor-path error budget. Confirm input bias current for high-impedance sources and verify the complete input common-mode range before connecting the sensor. A practical implementation should keep the sensor return and amplifier ground at the same reference potential and measure offset at the actual operating temperature.

📡

Active Filter Implementation

The AD9611BH can participate in an active-filter section when a circuit requires a dual-rail analog amplifier and a conventional through-hole implementation. Its single-amplifier architecture allows one device to realize a non-inverting, inverting, or differential gain function according to the surrounding passive network. Filter stability depends on gain, bandwidth, slew rate, and output loading, none of which is confirmed in the accessible product listing. Verify those parameters in the manufacturer datasheet and simulate the complete filter response before fabrication, especially at the minimum signal level and highest supported frequency.

🖥️

Test and Measurement Front End

The AD9611BH can serve as the input amplifier for a bench or embedded measurement front end operating from ±5 V. The confirmed 4300 uV maximum input offset voltage contributes directly to measurement uncertainty, so calibration and input-referred error calculations are essential for small signals. The -25°C to +85°C operating range supports industrial laboratory equipment, while the through-hole MQIP12 package simplifies prototyping and rework. Verify input noise, bandwidth, slew rate, and output swing before specifying it for high-accuracy acquisition, and include thermal settling in calibration routines.

🏭

Industrial Control Signal Interface

The AD9611BH can amplify or buffer a bipolar control signal in industrial equipment that operates from ±5 V. Its single-amplifier organization and -25°C to +85°C specified range fit compact analog interface blocks, although the through-hole package should be checked against the available board area. Confirm the output-current capability, capacitive-load behavior, and saturation characteristics in the manufacturer datasheet. Keep sensitive input routing away from switching nodes and use grounding consistent with the signal reference to prevent the 4300 uV offset limit from becoming a dominant system error.

🎧

Audio and Communication Signal Buffering

The AD9611BH can evaluate a low-frequency buffered signal path when the system uses ±5 V rails and does not require rail-to-rail output. The 4300 uV maximum input offset voltage is a meaningful limitation for very small audio or communications signals and should be included in the channel error budget. Gain-bandwidth product, slew rate, noise, and output swing must be checked in the manufacturer datasheet before use with wideband waveforms. A practical design should establish the signal-return reference, provide suitable passive filtering, and verify distortion and stability at the intended operating amplitude.

What is the AD9611BH?
The AD9611BH is a single general-purpose hybrid operational amplifier from Analog Devices in a 12-terminal MQIP12 through-hole package. According to the manufacturer product listing, it operates from ±5 V, has a maximum input offset voltage of 4300 uV, draws no more than 80 mA from the supply, and is specified for -25°C to +85°C. It is intended for general analog amplification, buffering, and signal-conditioning applications.
What are the key specifications of AD9611BH that engineers should know?
The key AD9611BH specifications are ±5 V operation, a maximum input offset voltage of 4300 uV, a maximum supply current of 80 mA, one amplifier circuit, and a -25°C to +85°C operating range. The Analog Devices listing identifies the component as a hybrid, 12-terminal QIP-style through-hole device. Gain-bandwidth product, slew rate, input bias current, common-mode range, and output swing must be confirmed in the complete manufacturer datasheet before final circuit design.
What is the input offset voltage of AD9611BH?
The maximum input offset voltage of the AD9611BH is 4300 uV. According to the Analog Devices product listing, this is the maximum differential input voltage that may remain when the output is returned to its reference level. The specification is important in low-amplitude instrumentation because it can create output error after amplification. Confirm the offset-voltage test conditions and the complete input-error characteristics in the manufacturer datasheet.
What supply voltage does AD9611BH require?
The AD9611BH is specified for ±5 V power supplies. This dual-rail arrangement allows an input signal to be referenced around ground and supports bipolar signal paths. According to the Analog Devices product listing, maximum supply current is 80 mA. The complete datasheet should be checked for absolute maximum supply voltage, input common-mode limits, output swing, and power dissipation before the device is connected to a supply rail.
What is the operating temperature range of AD9611BH?
The AD9611BH has a specified operating-temperature range of -25°C to +85°C. This range identifies the conditions under which Analog Devices characterizes operation and should be used as the baseline environmental requirement. Systems operating outside that interval require different qualification. Confirm thermal gradients, package thermal resistance, and any additional system-level requirements in the manufacturer documentation.
What package does AD9611BH use?
The AD9611BH uses a 12-terminal QIP-style package identified as MQIP12, with a square package shape and through-hole mounting. According to the Analog Devices product listing, the package contains 12 terminals rather than the 8 leads associated with a conventional DIP operational amplifier. Use the pin-description table and package drawing in the manufacturer datasheet before assigning PCB connections or checking mechanical clearance.
Where can I find the AD9611BH pinout and datasheet?
Use the Analog Devices product documentation to locate the AD9611BH pinout and full electrical characteristics. The confirmed product listing identifies the package as MQIP12 with 12 terminals, but it does not reproduce individual pin numbers or functions. Obtain the package drawing and pin-description table from the manufacturer datasheet before assigning signals, power, compensation, or output connections to the through-hole footprint.
Is AD9611BH suitable for instrumentation amplifier applications?
The AD9611BH can be considered for instrumentation-style signal-conditioning paths because it is a general-purpose operational amplifier with ±5 V operation and a specified 4300 uV maximum input offset voltage. Suitability for a precision instrument depends on the required accuracy, bandwidth, noise, common-mode range, and output swing. Compare those requirements with the complete manufacturer datasheet and validate offset error at the lowest expected signal level.
AD9611BH versus AD9611: are they interchangeable?
The AD9611BH should not be assumed to be interchangeable with another AD9611 ordering code without checking its package, grade, and temperature specification. The exact AD9611BH listing identifies a 12-terminal MQIP12 through-hole package, ±5 V operation, and a -25°C to +85°C range. Use the manufacturer's ordering guide and datasheet to determine whether another code has the same electrical characteristics, pinout, qualification level, and lifecycle status.
What is the best drop-in replacement for AD9611BH?
No verified drop-in replacement for the AD9611BH is identified from the available cross-reference results. A valid replacement must match the 12-terminal MQIP12 footprint, pin functions, ±5 V supply arrangement, 4300 uV-class offset requirement, 80 mA supply-current limit, and operating-temperature range. Submit the required electrical and mechanical criteria through the Request a Quote form so the sourcing team can evaluate qualified same-package options without suggesting an unverified substitute.
What can replace AD9611BH in an existing circuit?
An acceptable replacement for the AD9611BH must be pin-to-pin compatible with its 12-terminal MQIP12 footprint and satisfy the application's voltage, offset, bandwidth, slew-rate, common-mode, output-swing, and temperature requirements. No candidate from the cross-reference search establishes all of those conditions. Provide the exact circuit requirements and package drawing through the Request a Quote form for engineering review before changing the PCB or production BOM.
When should I choose AD9611BH over another operational amplifier?
Choose the AD9611BH when the design specifically matches its confirmed characteristics: a single amplifier, ±5 V operation, a 4300 uV maximum input offset voltage, an 80 mA maximum supply current, and operation from -25°C to +85°C. Do not choose it solely for a generic instrumentation role if the circuit requires lower offset, higher bandwidth, lower noise, rail-to-rail output, or a different package. Verify those unlisted parameters before committing the design.
Where can I buy AD9611BH and check current availability?
Use the Request a Quote form on this page to ask about AD9611BH stock, minimum order quantity, current lead time, and shipment options. Exact-MPN pricing is not shown statically because commercial terms can change and the accessible listing only presents a starting-from figure rather than a qualifying quantity-break table. The request form allows the current supply position and delivery conditions to be confirmed for the specific 12-terminal MQIP12 part.
What is the price of AD9611BH?
Current AD9611BH price and quantity terms should be requested through the Request a Quote form on this page. The accessible listing identifies a starting-from amount, but it does not provide the explicit quantity-break pricing required for reliable structured price extraction. No static price is therefore asserted here. Include the required order quantity, target packaging, and shipment destination in the request so the current commercial offer can be prepared.
What is the lead time for AD9611BH?
The current lead time for AD9611BH should be confirmed through the Request a Quote form on this page. Exact lead time can depend on the requested quantity, standard commercial versus screened ordering, and current factory or distribution availability. Submit the required quantity and delivery schedule with the request rather than relying on a historical availability statement, particularly when the design has a firm production date.
Is AD9611BH in stock?
Current stock for AD9611BH should be checked through the Request a Quote form on this page. The accessible product listing identifies the exact MPN as in stock at the time of retrieval, but inventory can change rapidly and may differ by package code or shipment destination. Enter the required quantity and location in the request to obtain the current availability and delivery commitment for AD9611BH.

Dữ liệu tham khảo kỹ thuật cho AD9611BH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD9611BH when the design specifically requires a single operational amplifier on ±5 V rails, a 4300 uV maximum input offset voltage, and an 80 mA maximum supply current. Its 12-terminal MQIP12 through-hole package can be advantageous for prototypes, repairable industrial assemblies, or boards designed around the confirmed footprint. Before selecting it, verify gain-bandwidth product, slew rate, input bias current, common-mode range, output swing, noise, and absolute maximum ratings in the manufacturer datasheet. Do not use it for low-voltage single-rail systems, rail-to-rail inputs or outputs, or precision measurements whose error budget cannot tolerate the stated offset range. A substitute should be selected only after its pinout, electrical limits, temperature range, and lifecycle status have been confirmed against the original circuit requirements.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Analog Devices
Package MQIP12 QIP-style through-hole package
Number of Terminals 12 terminals
Amplifier Circuits 1 circuit
Supply Voltage +/-5 V
Maximum Supply Current 80 mA
Maximum Input Offset Voltage 4300 uV
Operating Temperature Range -25°C to +85°C
Construction Hybrid
Mounting Type Through-hole

Bảo phân biệt quan trọng

  • Defined single-amplifier configuration (vsNo verified drop-in alternative)
  • Dual-rail analog operation (vsNo verified drop-in alternative)
  • Established environmental envelope (vsNo verified drop-in alternative)

Ghi chú thiết kế

Do not treat the general-purpose category as a complete specification. The confirmed 4300 uV maximum input offset voltage can dominate a low-level measurement, while gain-bandwidth product, slew rate, common-mode range, input bias current, and output swing remain unspecified. Before schematic release, compare every signal-path requirement with the manufacturer datasheet and ensure the complete waveform remains within the device's input and output limits.

The AD9611BH uses a 12-terminal MQIP12 through-hole package rather than a standard 8-pin DIP footprint. Do not assume standard DIP-8 pad locations will accept it. Use the manufacturer package drawing to establish hole spacing, body outline, pin numbering, and keep-out requirements. Confirm connector, transformer, or enclosure clearance before layout because the square package may require more routing space than a conventional narrow DIP.

Place the amplifier close to the source of the signal and keep input interconnects short to reduce pickup and parasitic feedback. For a balanced ±5 V circuit, maintain a low-impedance return path and use the manufacturer's recommended decoupling arrangement. If the gain stage follows a switching converter or relay, preserve separation between sensitive input traces and high-current switching paths. Validate the assembled board for oscillation at the intended gain before production release.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the exact AD9611BH ordering code. AEC-Q100 is not applicable because this product is an operational amplifier rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD9611BH datasheet AD9611BH datasheet pdf AD9611BH pinout AD9611BH specifications AD9611BH MQIP12 footprint Analog Devices AD9611BH AD9611BH operational amplifier AD9611BH input offset voltage AD9611BH supply voltage AD9611BH replacement AD9611BH drop-in equivalent AD9611BH price AD9611BH stock AD9611BH lead time

Các bộ phận và thuật ngữ liên quan

Analog Devices AD9611BH AD9611 Operational amplifier General-purpose amplifier Amplifier IC Analog integrated circuit Signal conditioning Active filter Instrumentation amplifier Input offset voltage Supply current Common-mode voltage range Slew rate Gain-bandwidth product MQIP12 QIP package Through-hole package Hybrid integrated circuit ±5 V power supply Buffered sensor signal Analog measurement front end
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ