Analog Devices

AD9623AN - Wideband Voltage Feedback Amplifier | Analog Devices

MPN: AD9623AN ✓ Hoạt động
8-pin DIP Package
MOQ: 1 |

AD9623AN Tóm tắt

Analog Devices AD9623AN is a wideband voltage-feedback amplifier in an 8-pin DIP package. It belongs to the high-speed operational-amplifier family used for instrumentation, measurement, and signal-conditioning systems. Its defining architecture is voltage feedback, while its 8-pin through-hole package supports conventional PCB assembly and prototype-board integration. The package identifies the standard AD9623AN ordering option as a DIP-8 device.

A voltage-feedback amplifier is an operational-amplifier architecture that controls its closed-loop behavior through a feedback network rather than relying primarily on current feedback. This class of amplifier is used to amplify differential or single-ended signals, buffer instrumentation outputs, and implement analog gain stages requiring wide signal bandwidth and predictable feedback operation. The AD9623 is described by Analog Devices as part of a family of very-high-speed, wide-bandwidth voltage-feedback amplifiers.

The AD9623AN combines a voltage-feedback signal path with an instrumentation-oriented application profile. The AN package designation corresponds to the 8-pin DIP configuration identified in product listings. Digital engineers and analog designers can use this package when the target PCB has through-hole DIP pads rather than a fine-pitch surface-mount footprint. As with any high-speed amplifier, the practical benefit depends on correct resistor selection, short feedback paths, controlled grounding, and suitable supply bypassing.

AD9623AN is used in precision and reliable op-amp solutions for instrumentation and measurement systems. Its voltage-feedback topology permits the designer to establish gain with external feedback components while maintaining control over bandwidth, impedance, and signal integrity. The manufacturer datasheet should be used as the authority for gain-bandwidth behavior, input and output impedance, slew rate, noise, distortion, supply limits, input common-mode limits, and stability requirements.

Typical application areas include high-speed instrumentation, analog measurement chains, data-acquisition front ends, signal conditioners, and waveform-processing circuits. The 8-pin DIP package is especially useful for laboratory prototypes, educational platforms, legacy instrumentation, and low- to moderate-volume equipment where through-hole assembly and straightforward replacement are priorities. It is also appropriate for designs that require the exact AD9623AN MPN rather than a surface-mount variant.

Designers should not select the amplifier from package and topology alone. Confirm the required gain, signal amplitude, bandwidth, noise, distortion, output swing, supply voltage, and operating temperature against the manufacturer datasheet before committing the circuit. Use short feedback traces, maintain symmetry around the signal path, place bypass capacitors close to the supply pins, and provide a stable output termination to minimize ringing and oscillation.

This product page combines the verified AD9623AN package and architecture information with engineering-oriented selection, application, and layout guidance. It also distinguishes the target DIP-8 ordering option from similar AD9623 family listings and highlights that only a verified, pin-compatible, same-package device should be treated as a true drop-in replacement.

Bộ thay thế dễ dàng lắp đặt cho AD9623AN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD9623AN (cùng hình factor và footprint) — khác nhau ở Package, Product Type.

Analog Devices
Package: 8-pin SOIC
Product Type: Single voltage-feedback operational amplifier
So sánh với AD9623AN →

AD9623AR

✅ Drop-In
Analog Devices
📦 DIP-8
Single voltage-feedback operational amplifier · Voltage feedback · 1 channel · 8-pin SOIC · 8 pins · Surface mount

Liên hệ để biết giá

Xem tài liệu →

AD9623AN Tỷ lệ tối đa & tính chất điện

Manufacturer Analog Devices
Product Type Voltage-feedback operational amplifier
Amplifier Architecture Voltage feedback
Hộp 8-pin DIP
Số chân 8 pins
Kiểu lắp đặt Through-hole DIP
Signal Class Wideband analog signal
Application Category Instrumentation and measurement

Hướng dẫn cấu hình chân AD9623AN 8-pin dip

Cấu hình chân cho AD9623AN (8-pin dip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin dip cho AD9623AN

Không có dữ liệu chân cụ thể sẵn có cho AD9623AN.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD9623AN phù hợp cho 6 Áp dụngs: High-Speed Instrumentation Amplification, Analog Data-Acquisition Front End, Precision Measurement Signal Conditioning, Waveform and Pulse Amplification, Sensor Interface Amplifier, Communications and Test Signal Path.

⚡

High-Speed Instrumentation Amplification

The AD9623AN fits an instrumentation front end when the circuit needs wideband voltage-feedback operation and an 8-pin DIP footprint. It can amplify a conditioned sensor or test signal before conversion by an ADC, with gain established through an external feedback network. The principal design consideration is closed-loop stability: component values, parasitic capacitance, source impedance, and output loading must remain compatible with the operating gain. Confirm required bandwidth, slew rate, input range, and output swing against the manufacturer datasheet before setting the gain. The DIP package is especially convenient for laboratory and legacy instrumentation boards where through-hole assembly and service replacement are more important than minimum board area.

🖥️

Analog Data-Acquisition Front End

AD9623AN can serve as the high-speed analog gain stage ahead of a data-acquisition converter in instrumentation equipment. Its voltage-feedback topology allows the designer to create a defined closed-loop response using external resistors and optional compensation elements. The 8-pin DIP package is practical for prototype acquisition boards that are assembled and modified during bring-up. Signal integrity requires short traces, a continuous ground reference, and bypass capacitors positioned near the device. The amplifier must also provide enough output swing and bandwidth for the converter input, while the source impedance and feedback network must be selected to avoid peaking. Use the manufacturer datasheet to establish safe operating limits for the intended signal range and sampling bandwidth.

🏭

Precision Measurement Signal Conditioning

The AD9623AN is applicable to measurement systems that condition low-level or rapidly changing analog signals before digitization or further analysis. A voltage-feedback amplifier configured with external resistors can provide signal gain while preserving a controlled impedance relationship across the measurement chain. Because the exact noise and offset figures must be checked for the exact ordering option, system error budgets should not assign values without reviewing the manufacturer datasheet. The 8-pin DIP package allows conventional through-hole placement and straightforward socket-based experimentation. Designers should use short input and feedback paths, clean grounding, and stable resistor construction to prevent parasitic effects from degrading the intended closed-loop response.

📺

Waveform and Pulse Amplification

AD9623AN can amplify waveform or pulse signals in test and measurement equipment where the voltage-feedback amplifier must operate across a broad signal bandwidth. The DIP-8 package supports through-hole construction on laboratory boards, analyzer prototypes, and educational measurement platforms. The circuit should use a termination and feedback arrangement appropriate to the source and load impedances; an incorrect termination can produce reflections or unintended gain. Input and output amplitude limits must remain within the device's specified operating region. Designers should also minimize loop area and keep sensitive nodes away from clock and switching-supply traces. The manufacturer datasheet is the controlling reference for slew-rate margin, output drive, and stable gain settings.

🧩

Sensor Interface Amplifier

The AD9623AN can be evaluated as a high-speed sensor-interface amplifier when the source requires more bandwidth than a general-purpose precision op-amp. Voltage feedback provides a conventional method for setting channel gain and bandwidth with external components. Care is required near the input because sensor cables and long traces add capacitance that can alter stability and pulse response. A shielded or tightly routed input, grounded reference, and symmetrical feedback layout help control this behavior. The 8-pin DIP format is advantageous for compact prototype sensor interfaces where a surface-mount footprint would complicate rework. Before choosing the device, verify input common-mode range, output swing, offset, noise, and operating temperature against the specific measurement range.

🌐

Communications and Test Signal Path

AD9623AN is suitable for a communications-related test signal path where a high-bandwidth voltage-feedback amplifier conditions an incoming waveform before measurement or system-level evaluation. The device should be evaluated at the actual operating gain and termination rather than selected from nominal bandwidth alone. Impedance matching, allowable overdrive, output loading, and power-supply headroom all affect waveform fidelity. The 8-pin DIP package supports rapid prototyping and replacement on test fixtures. Practical layout should keep input and feedback traces short, place bypass capacitors at the device, and avoid shared high-resistance routing with nearby digital signals. Confirm the AD9623AN electrical limits and pin configuration in the Analog Devices datasheet before releasing the test equipment.

What is the AD9623AN?
The AD9623AN is an Analog Devices wideband voltage-feedback operational amplifier packaged as an 8-pin DIP. Analog Devices describes the AD9623 as part of a family of very-high-speed, wide-bandwidth amplifiers using voltage-feedback architecture. The DIP-8 format is intended for through-hole PCB assembly and is useful for instrumentation, measurement, and signal-conditioning equipment. Exact electrical limits should be confirmed in the manufacturer datasheet.
What package does AD9623AN use?
The AD9623AN uses an 8-pin DIP package. This differs from similarly named AD9623 listings that use surface-mount packages, so the PCB must have the correct eight-pin through-hole footprint and adequate spacing for component leads. The package count is eight pins, while the manufacturer ordering code AN identifies this particular package option. Check the package drawing and pinout in the AD9623 datasheet before layout.
Is AD9623AN a voltage-feedback amplifier?
Yes, the AD9623AN is a voltage-feedback operational amplifier. Voltage feedback lets the circuit behavior be set through an external feedback network, including the gain-setting resistors and associated capacitance. This makes the amplifier suitable for instrumentation and measurement signal paths where a defined closed-loop response is required. Consult the manufacturer datasheet for the gain-bandwidth, noise, distortion, and stability limits of the selected operating mode.
Where can I download the AD9623AN datasheet PDF?
The AD9623AN datasheet can be located through the Analog Devices AD9623 documentation or through the AD9623 datasheet archive linked on this page. Use the manufacturer version for final design decisions because it contains the authoritative pinout, electrical characteristics, package outline, and application guidance. Compare the ordering information for the AN package before applying the document to a board designed around another AD9623 suffix.
Where is the AD9623AN pinout located?
The AD9623AN pinout is located in the pin-configuration section and package drawing of the Analog Devices AD9623 datasheet. The device uses eight pins in a DIP package, but the exact signal, power, offset-null, and no-connect assignments must be taken from the datasheet rather than inferred from the package. Use that pin table when creating the PCB footprint and when checking continuity on assembled hardware.
What applications are suitable for AD9623AN?
The AD9623AN is suitable for high-speed instrumentation, measurement, signal-conditioning, and data-acquisition front ends. Its voltage-feedback architecture supports externally configured closed-loop gain, while the 8-pin DIP package favors through-hole prototypes, laboratory equipment, and legacy-style boards. Suitability still depends on meeting the required bandwidth, signal amplitude, supply voltage, output swing, and operating-temperature conditions.
What can replace the AD9623AN?
A true replacement for the AD9623AN must match its 8-pin DIP footprint, pin functions, supply requirements, and electrical behavior. Similar AD9623 suffixes are not automatically interchangeable because package and temperature-ordering codes can change the physical or qualification characteristics. No confirmed drop-in substitute is established for the exact AD9623AN ordering option. Use the Request a Quote form on this page when reviewing supply options.
Is the AD9623AN the same as an Analog Devices AD9623AR?
No, the AD9623AN and AD9623AR are not automatically the same ordering option. The AD9623AN is identified as an 8-pin DIP device, while the AD9623AR is a surface-mount ordering variant. Their package suffix difference changes the PCB footprint even if portions of the amplifier core are related. Confirm pin functions, package drawings, and electrical ratings before considering either device as a replacement for the other.
AD9623AN vs AD9623ARZ - which should I choose?
Choose the AD9623AN for a PCB designed specifically for an 8-pin DIP footprint; the AD9623ARZ belongs to the surface-mount AD9623 family. The AD9623AN may simplify through-hole assembly and prototype rework, while the ARZ-style option is generally more appropriate for compact surface-mount production. A PCB footprint, pin-function review, and operating-condition comparison are required before choosing between them.
When should I choose AD9623AN over another AD9623 package option?
Choose the AD9623AN when the target board requires an 8-pin DIP footprint, through-hole assembly, or a straightforward laboratory replacement strategy. Select another AD9623 package option when higher board density, automated surface-mount assembly, or a different temperature ordering is required. The amplifier architecture alone does not determine interchangeability; package geometry and exact pin functions must also match.
Is AD9623AN suitable for instrumentation and measurement systems?
Yes, the AD9623AN is identified for instrumentation and measurement systems, including signal-conditioning and precision analog measurement applications. Its wideband voltage-feedback design can support high-speed closed-loop amplifier stages when the circuit operates within the electrical limits of the AD9623AN. Confirm gain-bandwidth, noise, distortion, input range, and output-drive requirements against the manufacturer datasheet.
What are the key specifications of AD9623AN that engineers should know?
The key confirmed characteristics of the AD9623AN are its wideband voltage-feedback architecture, 8-pin DIP package, through-hole mounting style, and instrumentation-and-measurement application profile. The package supplies eight physical pins and supports conventional DIP land patterns. Numeric bandwidth, slew-rate, noise, supply, and temperature details must be taken from the manufacturer datasheet for the exact ordering option before final design release.
How should the AD9623AN be laid out on a PCB?
Place the AD9623AN according to the eight-pin DIP footprint in the manufacturer package drawing and keep the feedback loop physically short. Connect bypass capacitors close to the supply pins, maintain a low-impedance return path, and avoid routing high-impedance input and feedback nodes beside noisy digital traces. A ground plane and symmetrical feedback-component placement will reduce parasitic effects and improve the likelihood of stable operation.
Where can I buy AD9623AN online?
Use the Request a Quote form on this page to request AD9623AN pricing, current supply, lot information, and lead time. The form is the direct route for a product-specific sourcing request and avoids reliance on outdated search listings. Before ordering, confirm the exact AD9623AN package, date-code requirements, operating-temperature marking, and quantity needed for your assembly schedule.
What is the price of AD9623AN?
AD9623AN pricing depends on quantity, condition, date code, and current supplier inventory, so a static price would not represent a current quotation. Use the Request a Quote form on this page to request a product-specific price and available quantity breaks. Include your required order quantity, packaging preference, target date, and acceptable date-code policy so the returned quotation is directly usable for sourcing.
What is the lead time and stock status for AD9623AN?
Current AD9623AN lead time and stock should be confirmed through the Request a Quote form on this page. Supply can vary with order quantity, date code, traceability requirements, and manufacturer inventory conditions. The product is currently presented as an active catalog part, but availability for a specific production window should be confirmed before inventory is committed to a build schedule.

Dữ liệu tham khảo kỹ thuật cho AD9623AN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD9623AN when the target PCB requires the exact 8-pin DIP package and the circuit needs a wideband voltage-feedback amplifier for instrumentation, measurement, or signal conditioning. Its through-hole construction is useful for prototypes, laboratory equipment, legacy boards, and designs where easy rework or replacement matters. Do not substitute an AD9623AR or AD9623ARZ solely because the family names are similar; those ordering options use surface-mount packages and require different PCB land patterns. If no confirmed eight-pin DIP alternative can be verified for the exact AD9623AN, retain the original part or redesign the board for an explicitly qualified alternative. Before final selection, compare the required gain, bandwidth, slew rate, noise, distortion, supply voltage, common-mode range, output swing, and temperature grade against the manufacturer datasheet.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 8-pin DIP
Brand Analog Devices
Amplifier Architecture Voltage feedback
Pin Count 8 pins
Mounting Style Through-hole DIP
Application Category Instrumentation and measurement
Lifecycle Status Active

Bảo phân biệt quan trọng

  • Through-hole package for conventional PCB assembly (vsAD9623AR)
  • Wideband voltage-feedback signal path (vsAD9623ARZ)
  • Exact manufacturer ordering option (vsAD9623ARZ-REEL7)

Ghi chú thiết kế

Keep the input, output, and feedback paths compact because the AD9623AN is a wideband voltage-feedback amplifier. Place feedback resistors close to the device, use short ground returns, and avoid routing sensitive nodes beneath digital or switching-current paths. The manufacturer package drawing should control the physical layout, while the application guidance in the datasheet should be used to select feedback values and optional compensation components for the intended closed-loop gain.

Use the manufacturer datasheet to establish the required supply voltage, supply current, and output-swing margin before designing the power rail. Place bypass capacitors close to the supply pins and provide low-inductance connections between the capacitors, device, and ground plane. Confirm that the upstream regulator can supply the transient current required by the chosen operating gain and signal amplitude rather than relying only on its nominal DC rating.

Do not treat AD9623AN and similarly named AD9623 suffix options as interchangeable without checking package geometry and pin functions. The AN version is identified as an 8-pin DIP, whereas other family members may use surface-mount packages. Also verify the maximum input common-mode voltage, output swing, and stable gain range; incorrect termination or excessive input overdrive can cause distortion or instability even when the signal amplitude appears acceptable at the output.

Avoid long prototype-board interconnects for high-speed feedback and signal paths. Breadboard capacitance and inductance can materially change a wideband amplifier's response. Prefer a compact assembled PCB, short leads, decoupled supply connections, and a defined source and load impedance. When evaluating bandwidth or stability, reproduce the intended termination and cable environment because results obtained with an open or mismatched input may not represent the final system.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

AEC-Q100 is marked not_applicable because this is an Analog Devices operational amplifier rather than an automotive-qualified ordering option. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD9623AN datasheet AD9623AN pinout AD9623AN datasheet pdf AD9623AN DIP-8 AD9623AN voltage feedback amplifier AD9623AN instrumentation application AD9623AN vs AD9623AR AD9623AN equivalent AD9623AN replacement AD9623AN footprint AD9623AN price AD9623AN stock Analog Devices AD9623AN

Các bộ phận và thuật ngữ liên quan

Analog Devices AD9623AN AD9623 AD9623AR AD9623ARZ AD9623ARZ-REEL7 voltage-feedback amplifier operational amplifier wideband amplifier signal conditioner instrumentation amplifier measurement system closed-loop gain feedback network gain bandwidth product slew rate common-mode voltage output swing 8-pin DIP DIP-8 through-hole mounting surface-mount package data acquisition waveform amplification semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ