AD976ACRSZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD976ACRSZ ✓ Hoạt độngAD976ACRSZ Tóm tắt
An ADC is a data-acquisition semiconductor that converts an analog voltage into a digital number for processing, measurement, or transmission. The AD976 belongs to the ADC category and the broader signal-conversion hierarchy: analog-to-digital converter, data-converter IC, signal-chain semiconductor. Its 16-bit resolution provides 65,536 possible code levels, while the single-channel architecture keeps the external signal path focused and manageable.
The AD976A family combines a 16-bit resolution with a throughput rate of 200 kSPS. The AD976ACRSZ operates from a single 5 V supply over a 4.75 V to 5.25 V input range, and its specified operating temperature range is -40°C to +85°C. A single analog input and parallel output arrangement make the device suitable for instrumentation and embedded data-acquisition systems that can accept parallel digital data.
Its switched-capacitor sampling architecture supports conversion of continuous analog signals without requiring a separate external sample-and-hold system. The proprietary BiCMOS implementation combines bipolar devices with CMOS transistors, supporting the analog input stage and digital conversion logic in one integrated circuit. According to the Analog Devices AD976 product information, the family is available in skinny 28-pin DIP, SSOP, and SOIC packages.
Typical applications include industrial process monitoring, digital instrumentation, waveform analysis, communications equipment, and embedded measurement systems. The 200 kSPS rate supports acquisition of signals up to the converter's usable bandwidth, while the 16-bit word length suits precision measurement systems requiring finer quantization than an 8-bit or 12-bit converter.
The primary design consideration is signal conditioning and reference stability. Keep the analog input within the specified range, provide clean supply and reference decoupling, and use appropriate source impedance and acquisition time for the selected sampling rate. PCB layout should minimize digital switching noise near the analog input and reference pins.
This product overview combines the manufacturer's architecture and family information with package, temperature, interface, and sourcing details. It also organizes practical selection, application, and replacement guidance so engineers can evaluate the AD976ACRSZ against other AD976A-family converters without duplicating the full datasheet.
Bộ thay thế dễ dàng lắp đặt cho AD976ACRSZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD976ACRSZ (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, Architecture, Output Interface.
AD976ACRS
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AD976ARZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AD976ACRSZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Conversion Rate | 200 kSPS |
| Architecture | Successive approximation (SAR) |
| Input Type | Single analog input |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Number of Supply Inputs | 1 |
| Output Interface | Parallel |
| Process Technology | Proprietary BiCMOS |
| Sampling Architecture | Switched capacitor |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Maximum Analog Input Voltage | 10 V |
| Hộp | 28-pin SSOP |
| Package Family | SSOP family |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân AD976ACRSZ ssop family
Cấu hình chân cho AD976ACRSZ (ssop family gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD976ACRSZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD976ACRSZ phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Precision Digital Instrumentation, Waveform and Signal Analysis, Communications Signal Conditioning, Data Acquisition Systems, Embedded Control and Monitoring.
Industrial Process Monitoring
The AD976ACRSZ suits process-monitoring systems that need 16-bit quantization and a conversion rate of up to 200 kSPS. Its single analog input can acquire a conditioned sensor or control signal, while the 4.75 V to 5.25 V single-supply range simplifies 5 V instrumentation. The parallel interface supports direct connection to digital acquisition logic, but designers must allocate routing space for the data bus and apply filtering or buffering before the analog input. The -40°C to +85°C operating range is suitable for many industrial environments, subject to correct grounding, shielding, and reference design.
Được đề xuất
Precision Digital Instrumentation
The AD976ACRSZ is appropriate for laboratory and field instruments that convert conditioned analog measurements into 16-bit digital data. A 200 kSPS maximum rate permits useful throughput for rapidly changing inputs, while the SAR architecture provides direct successive-approximation conversion. The single analog input keeps the front end deterministic but means multiplexed multi-channel systems need external switching. Supply and reference decoupling are critical because converter noise and reference variation can affect the least-significant bits, particularly when extracting small signals from sensors.
Được đề xuất
Waveform and Signal Analysis
For waveform acquisition, the AD976ACRSZ combines 16-bit resolution with a 200 kSPS sampling capability. This supports measurement of repetitive or time-varying analog signals where greater temporal resolution than a 100 kSPS converter is useful. The analog input bandwidth and usable acquisition rate must be evaluated together, because converter throughput alone does not guarantee accurate capture of high-frequency content. An appropriate anti-alias filter, stable reference, controlled source impedance, and short analog traces are needed to preserve sampled-data integrity.
Được đề xuất
Communications Signal Conditioning
The AD976ACRSZ can digitize conditioned communications signals when 16-bit resolution and a moderate 200 kSPS conversion rate are sufficient. It is most appropriate for baseband measurement, feedback monitoring, or envelope-related functions after suitable filtering and gain control. The parallel output can feed a digital processor or capture logic without requiring a high-speed serial interface. Design the supply rails, clock source, and reference network for low noise, and maintain separation between the analog input and the clock and data return paths to reduce conversion errors.
Được đề xuất
Data Acquisition Systems
The AD976ACRSZ fits modular data-acquisition designs requiring a 16-bit conversion result and acquisition rates up to 200 kSPS. Its single-input configuration is convenient for dedicated channel cards, while the 28-pin SSOP package supports conventional surface-mount assembly. Because the digital interface is parallel, system designers must plan connector density, bus fanout, and timing between the ADC and capture logic. A buffered analog front end and properly decoupled reference are recommended when preserving full-scale accuracy is important.
Được đề xuất
Embedded Control and Monitoring
The AD976ACRSZ can serve as the measurement element in embedded control, monitoring, or feedback systems that require more than an 8-bit or 12-bit conversion result. A 200 kSPS sampling rate can provide responsive control-loop updates, while the single 5 V supply supports integration with conventional digital logic. The parallel output requires sufficient GPIO or an interface adapter, and the sample rate must be coordinated with control-loop timing. Validate latency, acquisition time, and input-settling behavior to avoid late conversions in a feedback path.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD976ACRSZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD976ACRS | AD976ARZ |
|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit |
| Conversion Rate | 200 kSPS | 200 kSPS | 100 kSPS |
| Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Number of Analog Inputs | 1 input | 1 input | 1 input |
| Output Interface | Parallel | Parallel | Parallel |
| Process Technology | Proprietary BiCMOS | Proprietary BiCMOS | Proprietary BiCMOS |
Bảo phân biệt quan trọng
- Higher conversion throughput than the 100 kSPS AD976-family member (vsAD976ARZ)
- Same core conversion performance in the AD976A family (vsAD976ACRS)
- Single-supply operation simplifies analog system integration (vsAD976ARZ)
- Industrial temperature specification supports wider deployments (vsAD976ARZ)
Ghi chú thiết kế
Route the analog input away from the parallel data and clock traces, and use a continuous ground reference beneath the analog section. Keep the input path short and place any anti-alias or conditioning network close to the converter. The manufacturer's AD976/AD976A application guidance should be used to reproduce the recommended reference, clock, bypass-capacitor, and signal-ground arrangements.
Do not substitute a 100 kSPS AD976-family member when the design depends on 200 kSPS acquisition or control-loop latency. Also verify the complete ordering suffix because AD976A and AD976 grades differ in throughput, temperature grade, package, and possibly availability. A compatible SSOP outline is not sufficient by itself; confirm the pin map, interface timing, supply range, and converter acquisition behavior.
The parallel output can create switching-current transients that couple into the analog input and reference network. Use a stable clock source, provide local supply bypass capacitance at the device, and route high-current clock and data transitions away from the sensitive analog nodes. Validate the completed layout for code instability and reference ripple under the intended conversion rate.
Design the 5 V supply for the converter's analog and digital demands rather than assuming an unregulated rail is acceptable. The documented operating range is 4.75 V to 5.25 V, so regulation must remain inside those limits during load transitions. Use the manufacturer bypass recommendations and assess the reference voltage's start-up, settling, and noise behavior before the first valid conversion is accepted.
Thông tin tuân thủ
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are stated for the AD976ACRSZ. The converter is not presented as an automotive-qualified AEC-Q100 device.