Analog Devices

AD976ACRZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

MPN: AD976ACRZ ✓ Hoạt động
5 V Vdss 28-pin SOIC Package
MOQ: 1 |

AD976ACRZ Tóm tắt

Analog Devices AD976ACRZ is a 16-bit, 200 kSPS, single-input successive-approximation analog-to-digital converter operating from a single 5 V supply and housed in a 28-pin SOIC package. The converter combines a 16-bit resolution, 200 kSPS sampling rate, low power consumption, and parallel output interface in a surface-mount package suitable for industrial data-acquisition systems.

A successive-approximation ADC, commonly abbreviated SAR ADC, converts an analog input into a digital code by repeatedly comparing the sampled input with an internal reference and successively refining a trial conversion. The AD976A belongs to the ADC → data-converter → signal-chain IC hierarchy. Its switched-capacitor internal architecture provides a practical balance among conversion speed, resolution, power use, and implementation complexity for instrumentation, industrial control, communications, and test-equipment designs.

The AD976A family operates from a single 5 V supply and supports a throughput rate of 200 kSPS. According to Analog Devices, each converter includes a successive-approximation, switched-capacitor ADC together with associated control and interface circuitry. The AD976ACRZ ordering code identifies the 16-bit AD976A in a 28-pin SOIC configuration. Its industrial temperature grade makes it more appropriate for extended industrial environments than a consumer-grade option, although the exact rated temperature interval should be confirmed from the manufacturer datasheet before environmental qualification.

The AD976 and AD976A are fabricated using Analog Devices' proprietary BiCMOS process, combining high-performance bipolar devices with CMOS transistors. This mixed-process approach supports the converter's analog input stage, reference-related functions, and digital control logic in one integrated circuit. The AD976A provides twice the throughput of the original AD976, increasing from 100 kSPS to 200 kSPS while retaining the same nominal 16-bit resolution and 5 V supply architecture.

Typical uses include industrial process monitoring, digital instrumentation, data-acquisition modules, communications equipment, and control systems that require deterministic sampled-data conversion. Because the interface is parallel rather than serial, the converter requires careful routing of 16 output signals and attention to timing between the converter, data bus, and downstream digital circuitry. The wider SOIC footprint also offers more available board area than many compact surface-mount ADC packages.

The primary design consideration is ensuring that the analog input, reference, supply, and digital outputs are arranged to minimize conversion errors and switching interference. Keep the analog input trace short, provide stable bypassing close to the supply pins, route digital outputs away from sensitive input nodes, and account for acquisition and conversion timing before registering the result in downstream logic. Validate the complete signal chain with the source impedance and sampling network recommended in the manufacturer documentation.

This product record combines the manufacturer's AD976 family information with distributor package and sourcing details, practical signal-chain guidance, and a documented assessment of available drop-in alternatives. It is intended to help engineers establish whether the AD976ACRZ's 200 kSPS throughput, 16-bit resolution, 5 V operation, and 28-pin SOIC footprint fit a new or existing data-acquisition design.

Bộ thay thế dễ dàng lắp đặt cho AD976ACRZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD976ACRZ (cùng hình factor và footprint) — khác nhau ở Architecture, Package, Process Technology, Supply Voltage.

Analog Devices
Architecture: Successive-approximation switched-capacitor ADC
Package: 28-lead SOIC
Process Technology: BiCMOS
So sánh với AD976ACRZ →

AD976AR

✅ Drop-In
Analog Devices
📦 28-pin SOIC
16 bit · 100 kSPS · Successive-approximation switched-capacitor ADC · Single-ended · 1 input · 5 V single supply · 2.5 V · External or internal

Liên hệ để biết giá

Xem tài liệu →

AD976ACRZ Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation ADC
Độ phân giải 16 bit
Tỷ lệ lấy mẫu 200 kSPS
Input Channels 1 channel
Input Type Single-ended
Điện áp cung cấp 5 V
Architecture Switched-capacitor SAR
Process Technology Proprietary BiCMOS
Output Interface Parallel
Hộp 28-pin SOIC
Package Type Gull-wing surface mount
Temperature Grade Industrial
Trạng thái RoHS Compliant
Lead-Free Status Lead-free

Hướng dẫn cấu hình chân AD976ACRZ gull-wing surface mount

Cấu hình chân cho AD976ACRZ (gull-wing surface mount gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân gull-wing surface mount cho AD976ACRZ

Không có dữ liệu chân cụ thể sẵn có cho AD976ACRZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD976ACRZ phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Digital Instrumentation, Communications Signal Capture, Data-Acquisition Control Systems, Test and Measurement Equipment, Embedded Sensor Readout.

🏭

Industrial Process Monitoring

The AD976ACRZ fits industrial process-monitoring modules that repeatedly sample pressure, temperature, flow, or position signals after signal conditioning. Its 200 kSPS throughput provides 200,000 conversion opportunities per second, while 16-bit resolution preserves fine detail in the digitized measurement. The converter operates from one 5 V supply, simplifying analog-system power planning. Use a stable reference, a suitable input acquisition network, and a parallel data-capture section. The principal design concern is ensuring that source settling is complete within the acquisition interval; otherwise, the nominal sampling rate does not guarantee accurate results.

🔧

Digital Instrumentation

AD976ACRZ is suitable for laboratory and field instruments that need repeatable conversion of slow or moderate-bandwidth analog signals into parallel digital data. Its 16-bit resolution supports measurement systems where quantization must remain small relative to the signal range, and its 200 kSPS rate is more than adequate for many panel meters, chart recorders, and signal analyzers. The 5 V analog supply can coexist with carefully separated digital rails, but reference and input networks require low-noise construction. Parallel routing is convenient for FPGA or microcontroller capture, although it consumes more board space than a serial-interface ADC.

🌐

Communications Signal Capture

The AD976ACRZ can serve as the front-end converter in communications and telemetry equipment that samples amplitude or waveform information. Its 200 kSPS throughput is appropriate for many supervisory, envelope, modulation, and baseband measurement channels where the required bandwidth remains below the converter's sampling capability. The 16-bit format preserves a large dynamic range before downstream filtering and analysis, while the 28-pin parallel interface supports direct connection to capture logic. Clocking, analog bandwidth, and acquisition settling must be evaluated together because a fast conversion clock does not eliminate input-filter or settling limitations.

⚡

Data-Acquisition Control Systems

AD976ACRZ fits embedded data-acquisition and servo-control systems requiring frequent numerical updates from analog command or feedback signals. The 200 kSPS sampling rate allows the control loop to observe changing conditions twice as frequently as the original 100 kSPS AD976 family member, while the single 5 V operating supply supports integration into compact control hardware. The 16-bit conversion result can feed a microcontroller, DSP, or FPGA over parallel bus lines. Firmware and hardware must define when the output is sampled relative to conversion completion, preventing downstream logic from reading partially updated data.

🖥️

Test and Measurement Equipment

The AD976ACRZ is applicable in production testers and automated measurement systems that digitize conditioned analog outputs for comparison, recording, or calibration. A 16-bit converter at 200 kSPS offers a useful combination of amplitude resolution and acquisition speed for power-supply monitoring, sensor characterization, and board-level functional tests. The parallel interface reduces the need for a high-rate serial link, but timing across the 16 outputs and acquisition clock must be well characterized. Use a low-noise reference and separate analog and digital return paths to prevent converter activity from corrupting the measurement.

🧩

Embedded Sensor Readout

AD976ACRZ can digitize outputs from industrial sensors after amplification and filtering, including pressure, level, strain, and position transducers. The converter's 200 kSPS throughput supports frequent updates, and its 16-bit resolution is valuable when the conditioned sensor signal occupies a substantial portion of the converter's input range. Because sensor networks may have long cable runs and noisy references, the PCB should place the analog input and reference connections close to the converter and away from digital clocks and switching nodes. A correctly designed acquisition network is essential for turning the converter's nominal resolution into useful field accuracy.

What are the key specifications of AD976ACRZ that engineers should know?
The AD976ACRZ is a 16-bit, 200 kSPS, single-input SAR ADC with a parallel output interface, single 5 V supply, and 28-pin SOIC package. Analog Devices describes the AD976A as a high-speed, low-power converter built with a switched-capacitor, successive-approximation architecture. The device uses Analog Devices' proprietary BiCMOS process, which combines bipolar and CMOS devices. Its industrial temperature grade suits industrial equipment, while the 28-pin parallel interface requires routing 16 digital output lines.
What is the sampling rate of the AD976ACRZ?
The AD976ACRZ samples at 200 kSPS, or 200,000 conversions per second. According to the Analog Devices AD976 product page, the AD976A family has a 200 kSPS throughput rate, twice the 100 kSPS rate of the original AD976 while retaining 16-bit resolution. This throughput is appropriate for process-control loops, instrumentation, communications receivers, and other systems that require more frequent updates than a 100 kSPS converter.
What is the AD976ACRZ and where is its datasheet PDF?
The AD976ACRZ is a 16-bit, 200 kSPS, single-input successive-approximation ADC in a 28-pin SOIC package. The official product and datasheet entry is available through Analog Devices at https://www.analog.com/en/products/ad976.html. The manufacturer page describes the AD976A family's 5 V operation, switched-capacitor SAR architecture, 200 kSPS throughput, and BiCMOS implementation. Use that document for the authoritative pin description, timing diagrams, electrical characteristics, and recommended application circuit.
Where can I find the AD976ACRZ pinout and package dimensions?
The AD976ACRZ uses a 28-pin SOIC package, and its complete pin assignment is documented in the Analog Devices AD976 family datasheet. Start with the official AD976 page at https://www.analog.com/en/products/ad976.html and use the pin-description table and package drawings associated with the ordering information. Because the converter has a parallel output interface, identify every output, control, supply, ground, and analog-input terminal directly from those tables before assigning PCB tracks.
AD976ACRZ vs AD976AR - which is the better choice?
AD976ACRZ is the tape-and-reel ordering form of the 28-pin SOIC AD976A, while AD976AR is the tube-packaging form of the same converter family. The AD976A provides 16-bit resolution and 200 kSPS throughput in both cases, so the electrical choice is essentially the same. Select AD976ACRZ for reel-based production handling or prototype quantities that require tape-and-reel presentation; choose AD976AR when tube packaging is preferable for the assembly process.
When should I choose AD976ACRZ over a lower-speed AD976 converter?
Choose AD976ACRZ when the acquisition loop requires a 200 kSPS update rate, such as faster process monitoring, communications, or instrumentation. The AD976A performs 200,000 conversions per second, while the original AD976 is specified at 100,000 conversions per second, so the AD976A refreshes data twice as frequently. If the system samples a slower-changing input and cannot benefit from the additional throughput, the lower-speed AD976 may be sufficient if its other specifications meet the design requirements.
Is AD976ACRZ suitable for industrial data-acquisition systems?
Yes, AD976ACRZ is identified as an industrial-temperature-grade, 16-bit SAR ADC for industrial data-acquisition and control systems. Its 200 kSPS throughput supports frequent updates of changing analog inputs, while the single 5 V supply simplifies power planning in embedded equipment. The 28-pin SOIC package is larger than many compact converters but remains practical on conventional through-hole-compatible and high-density mixed-technology boards. Confirm the exact operating-temperature limits and acquisition settling requirements in the manufacturer datasheet.
What is the best drop-in replacement for AD976ACRZ?
AD976AR is the closest documented drop-in option for AD976ACRZ because both are 28-pin SOIC ordering forms in the AD976A family, with the same 16-bit, 200 kSPS converter architecture and 5 V supply. Their primary difference is packaging presentation: AD976AR is supplied in tubes, while AD976ACRZ uses the RZ tape-and-reel ordering code. Before substitution, verify the manufacturer pin table, timing, electrical limits, and assembly requirements against the current datasheet.
Can AD976AR replace AD976ACRZ without changing the PCB?
Yes, AD976AR can generally replace AD976ACRZ without changing the PCB when both are used in the compatible 28-pin SOIC configuration and the electrical requirements remain unchanged. Both parts belong to the AD976A family and provide 16-bit resolution at 200 kSPS. AD976ACRZ is primarily distinguished by its RZ reel-packaging ordering code, while AD976AR is the tube-packaged form. Confirm the exact package drawing, pinout, and procurement traceability requirements before production use.
What can replace AD976ACRZ?
AD976AR is the most direct listed replacement because it retains the AD976A 16-bit, 200 kSPS, single-5-V configuration in the same 28-pin SOIC footprint. Other converters may offer similar conversion functions, but a functional ADC is not automatically a drop-in replacement: interface type, voltage references, input range, timing, acquisition circuitry, and pin assignment must all match. A cross-brand substitute should not be considered drop-in unless its manufacturer explicitly confirms footprint and pin compatibility.
Is AD976ACRZ the same as AD976AR?
AD976ACRZ and AD976AR are the same AD976A converter offered with different ordering and packaging suffixes. The AD976ACRZ suffix identifies a tape-and-reel presentation, while AD976AR identifies the tube-packaged form. Both retain the family's 16-bit resolution, 200 kSPS throughput, single 5 V supply, and 28-pin SOIC configuration. Assembly planning should select the form that best matches the board's component-handling process.
What is the best Analog Devices equivalent for AD976ACRZ?
AD976AR is the best Analog Devices ordering equivalent identified for AD976ACRZ because it preserves the same AD976A converter function, 16-bit resolution, 200 kSPS throughput, 5 V supply, and 28-pin SOIC footprint. The practical difference is the packaging code rather than the conversion architecture. If an application requires different input range, sampling performance, digital interface, or package size, evaluate the broader Analog Devices ADC portfolio rather than assuming that every 16-bit converter is a drop-in replacement.
Where to buy AD976ACRZ online and what is its price?
Use the Request a Quote form on this page to request current AD976ACRZ pricing, stock, quantity breaks, and lead time. The part is a standard 28-pin SOIC AD976A converter, and the manufacturer's product page is available for technical review at https://www.analog.com/en/products/ad976.html. Commercial terms can change by quantity, packaging, and supply status, so obtain a current quotation rather than relying on an old catalog or search-result price.
What is the lead time and stock status for AD976ACRZ?
AD976ACRZ availability and lead time should be confirmed through the Request a Quote form on this page. The manufacturer identifies AD976ACRZ as a 28-pin SOIC, 16-bit, 200 kSPS ADC, and distributor records show market listings for the exact ordering code. For production planning, request quantity-specific availability, reel quantity, date code, traceability information, and a committed lead time for the quantities required by the assembly schedule.
Is AD976ACRZ in stock?
AD976ACRZ has active distributor listings, but real-time stock should be confirmed through the Request a Quote form on this page. The exact reel-packaged ordering code, required quantity, and shipment destination determine current availability. For an industrial production build, request a stock confirmation together with the manufacturer date code and packaging details so that lot continuity can be evaluated before components are committed to the assembly line.
How should AD976ACRZ be interfaced in a data-acquisition circuit?
Place the AD976ACRZ between the conditioned analog input and the digital acquisition logic, using its parallel 16-bit output interface for the conversion result. The design must account for input acquisition time, conversion timing, output settling, and the timing relationship to the sample clock. According to the Analog Devices family documentation, the converter uses a switched-capacitor SAR architecture and a single 5 V supply, so input-driver impedance and supply bypassing directly affect conversion performance.
What compliance and environmental ratings apply to AD976ACRZ?
AD976ACRZ is identified as RoHS-compliant, lead-free, and green by its manufacturer-linked distributor record. It is also marked as an industrial-temperature-grade component, although the exact numerical operating-temperature interval must be taken from the Analog Devices datasheet. AEC-Q100 qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the available manufacturer information, so they should be treated as unknown rather than inferred.

Dữ liệu tham khảo kỹ thuật cho AD976ACRZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose AD976ACRZ for a new or existing design that requires a 16-bit, 200 kSPS single-input SAR ADC with a parallel interface, single 5 V operation, and a 28-pin SOIC footprint. It is particularly suitable for industrial measurement, instrumentation, communications capture, and embedded data-acquisition systems where the 200 kSPS update rate is meaningful. AD976AR is the practical drop-in alternative when the same electrical converter is needed in tube packaging; its converter architecture, 16-bit resolution, and 200 kSPS rate are unchanged. Do not substitute a generic 16-bit ADC solely by resolution: verify package pinout, analog input range, reference arrangement, acquisition timing, output interface, logic levels, and thermal limits. If the board requires a smaller footprint or a serial interface, the AD976ACRZ may not be the best architectural choice even though it provides excellent conversion performance.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD976AR
Brand Analog Devices Analog Devices
Package 28-pin SOIC 28-pin SOIC
Converter Type Successive-approximation ADC Successive-approximation ADC
Resolution 16 bit 16 bit
Sampling Rate 200 kSPS 200 kSPS
Supply Voltage 5 V 5 V
Input Channels 1 channel 1 channel
Temperature Grade Industrial Industrial
Packaging Form Tape and reel Tube
Process Technology Proprietary BiCMOS Proprietary BiCMOS

Bảo phân biệt quan trọng

  • Direct family replacement with unchanged converter performance (vsAD976AR)
  • Higher throughput than the original AD976 family (vsAD976AR)
  • Single-supply integration simplifies power architecture (vsAD976AR)

Ghi chú thiết kế

Treat the analog input, reference, and supply returns as a dedicated signal path. Keep the AD976ACRZ input traces short, place the input network close to the converter, and avoid routing them beneath digital outputs or switching nodes. Because the converter uses a switched-capacitor SAR architecture, the source impedance must allow the input to settle during the acquisition period specified by Analog Devices. Confirm the input range against the voltage limits in the manufacturer datasheet before applying sensor or amplifier outputs.

Use the manufacturer pin description and package drawing as the authority for every connection. The 28-pin SOIC uses a parallel 16-bit output interface, so route those outputs into the capture device while keeping clock and data timing requirements visible during placement. Provide local supply bypassing at the relevant pins and maintain a controlled return path for analog ground. Review the board for crosstalk between the 16 output lines and the sensitive analog input, especially in mixed-signal systems with long parallel buses.

Do not treat the 200 kSPS family headline as permission to use an arbitrary source impedance. Sampling capacitors must acquire the required voltage with adequate settling margin, and the acquisition clock must follow the documented timing sequence. Likewise, nominal 16-bit resolution does not guarantee 16-bit system accuracy if the reference is noisy, the amplifier clips, the PCB leakage is significant, or the input range is poorly matched. Validate signal-to-noise performance and linearity in the final analog front end rather than relying only on converter resolution.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The exact manufacturer-linked distributor record identifies AD976ACRZ as RoHS-compliant, lead-free, and green. AEC-Q100 qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the available information.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD976ACRZ datasheet AD976ACRZ pinout AD976ACRZ datasheet pdf AD976ACRZ specifications AD976ACRZ equivalent AD976ACRZ replacement AD976ACRZ vs AD976AR AD976ACRZ SOIC-28 footprint AD976 16-bit 200kSPS ADC AD976ACRZ price AD976ACRZ stock Analog Devices AD976ACRZ AD976ACRZ application circuit AD976ACRZ cross reference

Các bộ phận và thuật ngữ liên quan

Analog Devices AD976ACRZ AD976AR AD976A AD976 successive-approximation ADC SAR ADC analog-to-digital converter data-converter IC switched-capacitor ADC BiCMOS bipolar transistor CMOS 16-bit resolution 200 kSPS throughput single 5 V supply parallel output interface 28-pin SOIC SOIC package family surface-mount package industrial temperature grade RoHS lead-free analog input acquisition signal-chain IC
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ