AD976ACRZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD976ACRZ ✓ 啟用中AD976ACRZ 概覽
A successive-approximation ADC, commonly abbreviated SAR ADC, converts an analog input into a digital code by repeatedly comparing the sampled input with an internal reference and successively refining a trial conversion. The AD976A belongs to the ADC → data-converter → signal-chain IC hierarchy. Its switched-capacitor internal architecture provides a practical balance among conversion speed, resolution, power use, and implementation complexity for instrumentation, industrial control, communications, and test-equipment designs.
The AD976A family operates from a single 5 V supply and supports a throughput rate of 200 kSPS. According to Analog Devices, each converter includes a successive-approximation, switched-capacitor ADC together with associated control and interface circuitry. The AD976ACRZ ordering code identifies the 16-bit AD976A in a 28-pin SOIC configuration. Its industrial temperature grade makes it more appropriate for extended industrial environments than a consumer-grade option, although the exact rated temperature interval should be confirmed from the manufacturer datasheet before environmental qualification.
The AD976 and AD976A are fabricated using Analog Devices' proprietary BiCMOS process, combining high-performance bipolar devices with CMOS transistors. This mixed-process approach supports the converter's analog input stage, reference-related functions, and digital control logic in one integrated circuit. The AD976A provides twice the throughput of the original AD976, increasing from 100 kSPS to 200 kSPS while retaining the same nominal 16-bit resolution and 5 V supply architecture.
Typical uses include industrial process monitoring, digital instrumentation, data-acquisition modules, communications equipment, and control systems that require deterministic sampled-data conversion. Because the interface is parallel rather than serial, the converter requires careful routing of 16 output signals and attention to timing between the converter, data bus, and downstream digital circuitry. The wider SOIC footprint also offers more available board area than many compact surface-mount ADC packages.
The primary design consideration is ensuring that the analog input, reference, supply, and digital outputs are arranged to minimize conversion errors and switching interference. Keep the analog input trace short, provide stable bypassing close to the supply pins, route digital outputs away from sensitive input nodes, and account for acquisition and conversion timing before registering the result in downstream logic. Validate the complete signal chain with the source impedance and sampling network recommended in the manufacturer documentation.
This product record combines the manufacturer's AD976 family information with distributor package and sourcing details, practical signal-chain guidance, and a documented assessment of available drop-in alternatives. It is intended to help engineers establish whether the AD976ACRZ's 200 kSPS throughput, 16-bit resolution, 5 V operation, and 28-pin SOIC footprint fit a new or existing data-acquisition design.
直接替換替代品,適用於 AD976ACRZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD976ACRZ (相同外形與佔位) — 差異在於 Architecture, Package, Process Technology, Supply Voltage.
AD976ACRZ 最大額定值與電氣特性
| Converter Type | Successive-approximation ADC |
| 解析度 | 16 bit |
| 取樣率 | 200 kSPS |
| Input Channels | 1 channel |
| Input Type | Single-ended |
| 供應電壓 | 5 V |
| Architecture | Switched-capacitor SAR |
| Process Technology | Proprietary BiCMOS |
| Output Interface | Parallel |
| 封裝 | 28-pin SOIC |
| Package Type | Gull-wing surface mount |
| Temperature Grade | Industrial |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Lead-free |
AD976ACRZ gull-wing surface mount 腳位配置指南
AD976ACRZ(gull-wing surface mount 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD976ACRZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD976ACRZ 適用於 6 應用s: Industrial Process Monitoring, Digital Instrumentation, Communications Signal Capture, Data-Acquisition Control Systems, Test and Measurement Equipment, Embedded Sensor Readout.
Industrial Process Monitoring
The AD976ACRZ fits industrial process-monitoring modules that repeatedly sample pressure, temperature, flow, or position signals after signal conditioning. Its 200 kSPS throughput provides 200,000 conversion opportunities per second, while 16-bit resolution preserves fine detail in the digitized measurement. The converter operates from one 5 V supply, simplifying analog-system power planning. Use a stable reference, a suitable input acquisition network, and a parallel data-capture section. The principal design concern is ensuring that source settling is complete within the acquisition interval; otherwise, the nominal sampling rate does not guarantee accurate results.
推薦
Digital Instrumentation
AD976ACRZ is suitable for laboratory and field instruments that need repeatable conversion of slow or moderate-bandwidth analog signals into parallel digital data. Its 16-bit resolution supports measurement systems where quantization must remain small relative to the signal range, and its 200 kSPS rate is more than adequate for many panel meters, chart recorders, and signal analyzers. The 5 V analog supply can coexist with carefully separated digital rails, but reference and input networks require low-noise construction. Parallel routing is convenient for FPGA or microcontroller capture, although it consumes more board space than a serial-interface ADC.
推薦
Communications Signal Capture
The AD976ACRZ can serve as the front-end converter in communications and telemetry equipment that samples amplitude or waveform information. Its 200 kSPS throughput is appropriate for many supervisory, envelope, modulation, and baseband measurement channels where the required bandwidth remains below the converter's sampling capability. The 16-bit format preserves a large dynamic range before downstream filtering and analysis, while the 28-pin parallel interface supports direct connection to capture logic. Clocking, analog bandwidth, and acquisition settling must be evaluated together because a fast conversion clock does not eliminate input-filter or settling limitations.
推薦
Data-Acquisition Control Systems
AD976ACRZ fits embedded data-acquisition and servo-control systems requiring frequent numerical updates from analog command or feedback signals. The 200 kSPS sampling rate allows the control loop to observe changing conditions twice as frequently as the original 100 kSPS AD976 family member, while the single 5 V operating supply supports integration into compact control hardware. The 16-bit conversion result can feed a microcontroller, DSP, or FPGA over parallel bus lines. Firmware and hardware must define when the output is sampled relative to conversion completion, preventing downstream logic from reading partially updated data.
推薦
Test and Measurement Equipment
The AD976ACRZ is applicable in production testers and automated measurement systems that digitize conditioned analog outputs for comparison, recording, or calibration. A 16-bit converter at 200 kSPS offers a useful combination of amplitude resolution and acquisition speed for power-supply monitoring, sensor characterization, and board-level functional tests. The parallel interface reduces the need for a high-rate serial link, but timing across the 16 outputs and acquisition clock must be well characterized. Use a low-noise reference and separate analog and digital return paths to prevent converter activity from corrupting the measurement.
推薦
Embedded Sensor Readout
AD976ACRZ can digitize outputs from industrial sensors after amplification and filtering, including pressure, level, strain, and position transducers. The converter's 200 kSPS throughput supports frequent updates, and its 16-bit resolution is valuable when the conditioned sensor signal occupies a substantial portion of the converter's input range. Because sensor networks may have long cable runs and noisy references, the PCB should place the analog input and reference connections close to the converter and away from digital clocks and switching nodes. A correctly designed acquisition network is essential for turning the converter's nominal resolution into useful field accuracy.
推薦
推薦產品摘要
工程參考資料,適用於 AD976ACRZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD976AR |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 28-pin SOIC | 28-pin SOIC |
| Converter Type | Successive-approximation ADC | Successive-approximation ADC |
| Resolution | 16 bit | 16 bit |
| Sampling Rate | 200 kSPS | 200 kSPS |
| Supply Voltage | 5 V | 5 V |
| Input Channels | 1 channel | 1 channel |
| Temperature Grade | Industrial | Industrial |
| Packaging Form | Tape and reel | Tube |
| Process Technology | Proprietary BiCMOS | Proprietary BiCMOS |
主要差異化特點
- Direct family replacement with unchanged converter performance (對比AD976AR)
- Higher throughput than the original AD976 family (對比AD976AR)
- Single-supply integration simplifies power architecture (對比AD976AR)
設計說明
Treat the analog input, reference, and supply returns as a dedicated signal path. Keep the AD976ACRZ input traces short, place the input network close to the converter, and avoid routing them beneath digital outputs or switching nodes. Because the converter uses a switched-capacitor SAR architecture, the source impedance must allow the input to settle during the acquisition period specified by Analog Devices. Confirm the input range against the voltage limits in the manufacturer datasheet before applying sensor or amplifier outputs.
Use the manufacturer pin description and package drawing as the authority for every connection. The 28-pin SOIC uses a parallel 16-bit output interface, so route those outputs into the capture device while keeping clock and data timing requirements visible during placement. Provide local supply bypassing at the relevant pins and maintain a controlled return path for analog ground. Review the board for crosstalk between the 16 output lines and the sensitive analog input, especially in mixed-signal systems with long parallel buses.
Do not treat the 200 kSPS family headline as permission to use an arbitrary source impedance. Sampling capacitors must acquire the required voltage with adequate settling margin, and the acquisition clock must follow the documented timing sequence. Likewise, nominal 16-bit resolution does not guarantee 16-bit system accuracy if the reference is noisy, the amplifier clips, the PCB leakage is significant, or the input range is poorly matched. Validate signal-to-noise performance and linearity in the final analog front end rather than relying only on converter resolution.
合規資訊
The exact manufacturer-linked distributor record identifies AD976ACRZ as RoHS-compliant, lead-free, and green. AEC-Q100 qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the available information.