Analog Devices

AD9991KCP - 10-Bit CCD Signal Processor | Analog Devices

MPN: AD9991KCP ✗ Cuối đời
56-lead LFCSP-VQ, 8 mm x 8 mm Package 4-phase and 6-phase Speed
MOQ: 1 |

AD9991KCP Tóm tắt

Analog Devices AD9991KCP is a 10-bit CCD signal processor with a precision timing generator, combining an analog CCD front end, 10-bit variable gain amplifier, 10-bit A/D converter, correlated double sampling, black-level clamp, and programmable timing control in a 56-lead LFCSP-VQ package. The device supports 4-phase and 6-phase vertical clocking, uses a 27 MHz A/D converter, and provides precision timing adjustment with 800 ps resolution.

A CCD signal processor is an integrated interface IC that conditions analog pixel signals and manages the clocks required to transfer charge through a charge-coupled device. In the electronic hierarchy, it belongs to interface ICs and sensor-detector interfaces. Its purpose is to translate a CCD output into a digitized, gain-controlled image signal while synchronizing horizontal and vertical transfer clocks with the imaging system.

The AD9991 combines a 10-bit variable gain amplifier, correlated double sampling, black-level clamp, and a 10-bit 27 MHz A/D converter. It supports both 4-phase and 6-phase vertical transfer clocks. The programmable timing generator can adjust high-speed clocks with 800 ps resolution, helping camera and imaging designers establish repeatable pixel timing without implementing a separate timing-control system.

Its integrated architecture reduces the number of discrete analog and digital blocks required around a CCD. Correlated double sampling rejects much of the reset noise present in CCD pixel output, while the variable gain amplifier accommodates different scene illumination levels. The 10-bit converter provides 1,024 quantization levels for the digitized analog signal, and the black-level clamp helps establish a stable black reference before image processing.

The AD9991 was designed for digital still cameras and camcorders, where CCD sensors require coordinated transfer clocks, analog gain control, black-level correction, and high-speed digitization. The same signal chain can support industrial imaging, barcode-scanning optics, machine-vision cameras, and other CCD-based systems when their sensor timing and electrical requirements are compatible with the device.

PCB implementation requires careful attention to the 56-lead LFCSP-VQ footprint, exposed-pad thermal design, analog input routing, and clock-signal integrity. Follow the manufacturer datasheet for the complete pin-description table, recommended decoupling, clock-generation settings, and exposed-pad land pattern. Verify sensor timing, serial interface mode, operating supply rails, and digital I/O levels before finalizing a new design.

This page combines the core AD9991KCP specifications, a source-linked datasheet reference, practical application guidance, and a package-compatible replacement assessment. It also distinguishes the KCP ordering code from the related KCPZ and KCPZRL variants so engineers can review temperature, packaging, and qualification requirements before committing a legacy imaging design to procurement.

Bộ thay thế dễ dàng lắp đặt cho AD9991KCP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

AD9991KCPZ

✅ Drop-In
📦 56-LFCSP-VQ (8 mm x 8 mm)
Same AD9991 CCD signal-processor family and 56-LFCSP-VQ package; ordering-code temperature or lead-finish attributes must be confirmed

📋 Tham chiếu thay thế (không có trong danh mục)

AD9991KCPZRL

✅ Drop-In
📦 56-LFCSP-VQ (8 mm x 8 mm)
Same AD9991 CCD signal-processor family and 56-LFCSP-VQ package; RL ordering-code attributes require confirmation before substitution

📋 Tham chiếu thay thế (không có trong danh mục)

AD9991KCP Tỷ lệ tối đa & tính chất điện

Product Type 10-bit CCD signal processor with precision timing generator
ADC Resolution 10 bit
ADC Conversion Rate 27 MHz
Variable Gain Amplifier Resolution 10 bit
Vertical Transfer Clock Support 4-phase and 6-phase
Precision Timing Adjustment 800 ps
Signal Conditioning Correlated double sampling
Black-Level Control Black-level clamp
Interface Function CCD analog front end with programmable timing generation
Hộp 56-lead LFCSP-VQ, 8 mm x 8 mm
Kiểu lắp đặt Surface mount
Primary Application Digital still camera and camcorder CCD imaging
Logic Interface Logic input and logic output

Hướng dẫn cấu hình chân AD9991KCP 56-lead lfcsp-vq, 8 mm x 8 mm

Cấu hình chân cho AD9991KCP (56-lead lfcsp-vq, 8 mm x 8 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 56-lead lfcsp-vq, 8 mm x 8 mm cho AD9991KCP

Không có dữ liệu chân cụ thể sẵn có cho AD9991KCP.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD9991KCP phù hợp cho 6 Áp dụngs: Digital Still Camera, Camcorder Imaging, Industrial CCD Machine Vision, Barcode Scanner Optics, Scientific CCD Camera, Security Camera.

📷

Digital Still Camera

The AD9991KCP fits a digital still camera because it integrates the major functions required to condition and digitize CCD pixel output. Its 10-bit VGA supports scene-dependent gain adjustment, correlated double sampling reduces reset-related noise, and the black-level clamp establishes a stable reference before the 10-bit 27 MHz ADC performs conversion. The programmable timing generator supports 4-phase and 6-phase vertical transfer clocks and offers 800 ps timing adjustment for aligning sensor clocks with the imaging system. A designer should match the CCD output amplitude and timing to the device input requirements, then use the manufacturer timing-generator configuration and exposed-pad layout in the final PCB design.

🎥

Camcorder Imaging

AD9991KCP is suited to camcorder CCD imaging because it combines analog gain control, correlated double sampling, black-level correction, digitization, and sensor-clock generation in one signal processor. The 10-bit VGA allows exposure-chain gain to be adjusted across changing scene brightness, while the 10-bit ADC samples the conditioned CCD output at 27 MHz. Support for both 4-phase and 6-phase vertical clocking provides flexibility when matching different CCD transfer architectures. The precision timing core can adjust high-speed clocks by 800 ps, supporting repeatable synchronization between the CCD, processor, and downstream image pipeline.

🏭

Industrial CCD Machine Vision

The AD9991KCP can serve as the CCD conditioning and timing device in an industrial machine-vision camera when the image sensor's transfer scheme is compatible. Correlated double sampling helps reject reset noise, the 10-bit VGA accommodates the usable analog range of the sensor, and the 10-bit 27 MHz ADC produces the digitized pixel stream. Its 4-phase or 6-phase vertical-clock support allows the camera designer to match the CCD architecture rather than build a separate timing controller. For industrial deployment, verify the device's operating-temperature grade, calibration requirements, environmental qualification, and CCD-specific timing constraints before production release.

🔧

Barcode Scanner Optics

AD9991KCP can be used in a CCD-based barcode scanner when the selected sensor uses a vertical transfer scheme supported by the device. The 10-bit variable gain amplifier can bring the reflected-light signal into the ADC's usable range, while correlated double sampling and the black-level clamp support stable extraction of the optical signal. The integrated timing generator produces the required camera clocks and permits 800 ps adjustment for sensor and system synchronization. Because barcode imaging depends on consistent sensor timing and low channel-to-channel variation, engineers should retain the manufacturer's clock configuration and use the same calibration sequence in the finished scanner.

🔬

Scientific CCD Camera

AD9991KCP is applicable to a scientific or metrology camera built around a compatible CCD sensor. Its correlated double sampler reduces offset-like reset noise, the 10-bit VGA provides adjustable analog gain, and the black-level clamp supports deterministic dark-reference calibration. A 10-bit ADC operating at 27 MHz converts the conditioned pixel signal for transfer into a digital image processor. The precision timing generator supports both 4-phase and 6-phase vertical transfer clocks and 800 ps clock adjustment, which can simplify synchronization with the CCD array. Measurement accuracy still depends on optical design, sensor selection, calibration, noise characterization, and the stability of the external clock and power implementation.

🎥

Security Camera

AD9991KCP can support a legacy CCD security-camera signal chain where compatible vertical transfer clocks and a 10-bit digitized pixel stream are required. The variable gain amplifier adapts the CCD output across changing scene illumination, correlated double sampling suppresses reset noise, and the black-level clamp stabilizes the video baseline. The programmable timing generator provides 4-phase or 6-phase operation with 800 ps adjustment, reducing the need for separate clock-generation circuitry. The security-camera designer must still account for image sensor transfer timing, channel uniformity, lighting conditions, analog input routing, power integrity, and the synchronization requirements of the downstream video-processing electronics.

What is the AD9991KCP?
The AD9991KCP is a 10-bit CCD signal processor with a precision timing generator from Analog Devices. According to the manufacturer datasheet, it combines a 10-bit variable gain amplifier, correlated double sampling, a black-level clamp, a 10-bit 27 MHz A/D converter, and programmable support for 4-phase or 6-phase vertical transfer clocks. It is packaged in a 56-lead LFCSP-VQ package for digital still camera and camcorder imaging systems.
What are the key specifications of AD9991KCP that engineers should know?
The AD9991KCP combines a 10-bit ADC operating at 27 MHz with a 10-bit VGA, correlated double sampling, a black-level clamp, and a programmable precision timing generator. The Analog Devices datasheet states that the timing generator supports both 4-phase and 6-phase vertical clocking and can adjust high-speed clocks with 800 ps resolution. Its 56-lead LFCSP-VQ package measures 8 mm by 8 mm and is intended for surface-mount camera and imaging assemblies.
Where to download the AD9991KCP datasheet PDF?
The official AD9991KCP datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9991.pdf. It is the appropriate document for confirming the complete pin-description table, electrical characteristics, recommended application circuit, serial interface details, timing-generator settings, and 56-lead LFCSP-VQ land pattern. Use the Request a Quote form on this page for current order and lead-time information.
Where can I find the AD9991KCP pinout?
The AD9991KCP pinout is documented in the Pin Description and Pin Configuration sections of the official Analog Devices AD9991 datasheet. The device uses a 56-lead LFCSP-VQ package, so the package drawing and land pattern must be used together with the numbered pin table. Do not infer connections from a generic 56-pin footprint because the exposed pad, power pins, analog inputs, clock outputs, and digital interface have device-specific assignments.
What is the difference between AD9991KCP and AD9991KCPZ?
AD9991KCP and AD9991KCPZ are ordering variants of the same Analog Devices CCD signal processor family and both are associated with the 56-lead LFCSP-VQ implementation. Their exact ordering-code and qualification differences must be checked in the manufacturer ordering information before substitution. Use AD9991KCPZ as the documented package-compatible candidate, but validate temperature grade, lead finish, production status, and certification requirements before releasing it to production.
Can AD9991KCPZ replace AD9991KCP?
AD9991KCPZ is a potential drop-in candidate for AD9991KCP because both are listed as AD9991-family devices in a 56-lead LFCSP-VQ package. The replacement is not automatically approved for every legacy design: compare the ordering information, temperature range, electrical limits, exposed-pad layout, clock configuration, and qualification requirements. The same review is required for AD9991KCPZRL, whose exact ordering-code differences should be confirmed from the manufacturer documentation.
What can replace AD9991KCP?
AD9991KCPZ and AD9991KCPZRL are the documented same-family candidates associated with the AD9991KCP function, and both use the 56-lead LFCSP-VQ package identified for the target device. No separate manufacturer offering a confirmed pin-to-pin replacement appears in the available records. Treat these as package-compatible candidates rather than automatic second sources, and validate timing, temperature grade, production status, and system calibration before substitution.
What is the best Analog Devices equivalent for AD9991KCP?
AD9991KCPZ is the closest documented Analog Devices ordering candidate for AD9991KCP, with the same CCD-signal-processor family and 56-lead LFCSP-VQ package. AD9991KCPZRL is another related ordering candidate, but its ordering-code attributes must be checked before use. No cross-manufacturer equivalent with confirmed pin-to-pin compatibility was identified, so the design should not be converted to a different CCD processor without a complete electrical, timing, and footprint review.
Is AD9991KCP suitable for digital still cameras?
Yes, AD9991KCP is specifically suitable for digital still cameras that use a compatible CCD output architecture. The Analog Devices datasheet identifies digital still camera and camcorder applications and provides a 10-bit 27 MHz ADC, 10-bit VGA, correlated double sampling, black-level clamp, and programmable 4-phase or 6-phase vertical clocking. The CCD must still meet the device's signal-amplitude, timing, noise, and interface requirements for proper operation.
Is AD9991KCP suitable for industrial CCD machine vision?
AD9991KCP can fit industrial CCD machine-vision designs when the sensor timing and analog interface match its CCD signal-processor architecture. Its 10-bit ADC, 10-bit VGA, correlated double sampling, black-level clamp, and programmable vertical-clock support cover the basic pixel-chain functions required by many camera systems. Industrial qualification requirements, environmental exposure, sensor compatibility, and the exact operating-temperature grade must still be reviewed separately.
AD9991KCP vs AD9991KCPZ — which is better for a legacy camera design?
AD9991KCP is the appropriate selection when a legacy design specifically requires the KCP ordering code, while AD9991KCPZ is the preferred package-compatible candidate when the manufacturer confirms that its ordering attributes satisfy the design. Both belong to the same AD9991 family and use the 56-lead LFCSP-VQ package. Choose based on current lifecycle, temperature grade, lead-finish requirements, qualification, and supply status rather than package appearance alone.
When should I choose AD9991KCP over AD9991KCPZ?
Choose AD9991KCP over AD9991KCPZ when the original bill of materials specifies the KCP ordering code and the product must retain that exact manufacturer part identity. Choose AD9991KCPZ for a new or obsolete-design review only after its ordering table, operating-temperature grade, package dimensions, pin mapping, and lifecycle status have been confirmed against the KCP requirements. The practical distinction is ordering-code and lifecycle suitability, not a different CCD signal-processing function.
Where to buy AD9991KCP online?
Use the Request a Quote form on this page to request AD9991KCP availability, minimum order quantity, current lead time, and orderable packaging. Because AD9991KCP is a legacy CCD signal processor, a direct stock check should be treated as time-sensitive rather than guaranteed. The request should state the required quantity, 56-lead LFCSP-VQ package, temperature requirements, and whether an approved alternate ordering code is acceptable for production.
What is the price of AD9991KCP?
Use the Request a Quote form on this page for the current AD9991KCP quotation, because legacy semiconductor pricing depends on quantity, condition, packaging, and availability. The structured pricing area on this page is the authoritative source for any displayed commercial terms. The product has a historical unit-price record for planning purposes, but that older reference should not be treated as a current procurement commitment.
What is the lead time for AD9991KCP?
The current AD9991KCP lead time must be requested through the Request a Quote form on this page. Because this is an obsolete CCD signal processor, lead time can vary with remaining factory inventory, assembly and test capacity, package availability, and the requested quantity. Include the exact MPN and package in the request, and state whether AD9991KCPZ or AD9991KCPZRL may be quoted as an alternate after technical review.
Is AD9991KCP in stock?
AD9991KCP inventory status should be confirmed through the Request a Quote form on this page because this legacy part may be supplied from limited remaining stock rather than regular production. The form should receive the required quantity, desired package, target date, and approval status for an alternate ordering code. A stock confirmation for AD9991KCPZ should not be treated as stock for AD9991KCP because their ordering attributes and production status must remain separate.

Dữ liệu tham khảo kỹ thuật cho AD9991KCP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose AD9991KCP when maintaining a legacy CCD camera or scanner requires the exact KCP ordering identity and the product's integrated 10-bit VGA, 10-bit 27 MHz ADC, correlated double sampling, black-level clamp, and programmable timing generator. AD9991KCPZ is the preferred package-compatible candidate when the manufacturer confirms that its ordering attributes meet the temperature, lead-finish, lifecycle, and qualification requirements. Consider AD9991KCPZRL only after its ordering-code attributes are confirmed in the manufacturer documentation. No cross-manufacturer drop-in replacement was identified, so changing processor families would require a complete electrical, timing, firmware, and PCB-layout review rather than a simple replacement. For new CCD-based products, confirm sensor compatibility, image timing, calibration method, environmental requirements, and long-term supply before committing the architecture.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD9991KCPZ AD9991KCPZRL
Package 56-LFCSP-VQ (8 mm x 8 mm) 56-LFCSP-VQ (8 mm x 8 mm) 56-LFCSP-VQ (8 mm x 8 mm)
Brand Analog Devices Analog Devices Analog Devices
Product Type 10-bit CCD signal processor with precision timing generator 10-bit CCD signal processor 10-bit CCD signal processor
ADC Resolution 10 bit 10 bit 10 bit
ADC Conversion Rate 27 MHz 27 MHz 27 MHz
Vertical Transfer Clock Support 4-phase and 6-phase 4-phase and 6-phase 4-phase and 6-phase
Precision Timing Adjustment 800 ps 800 ps 800 ps
Signal Conditioning Correlated double sampling and black-level clamp Correlated double sampling and black-level clamp Correlated double sampling and black-level clamp
Variable Gain Amplifier Resolution 10 bit 10 bit 10 bit
Ordering-Code Attributes KCP KCPZ ordering attributes KCPZRL ordering attributes

Bảo phân biệt quan trọng

  • Combines CCD signal conditioning, conversion, and timing generation (vsAD9991KCPZ)
  • Precision adjustment for CCD transfer-clock timing (vsAD9991KCPZRL)
  • Complete analog front end for digital imaging (vsAD9991KCPZ)

Ghi chú thiết kế

Use the Analog Devices AD9991 datasheet's recommended 56-lead LFCSP-VQ land pattern and pin-description table for the PCB footprint. Keep the analog CCD input path short and isolated from the digital timing outputs, and route high-speed clock lines away from sensitive analog nodes. The exposed pad must connect to the intended ground plane and thermal-copper structure rather than being treated as an unused mechanical feature.

CCD clock edges and the 27 MHz conversion process require controlled routing because timing jitter or clock-to-analog coupling can affect pixel-data quality. Match the manufacturer's clock-generation configuration, keep clock traces away from the CCD analog input and reference nodes, and use a solid ground reference under the device. Validate sampling relationships with the target CCD using an oscilloscope before adjusting gain, clamping, or timing parameters in the final camera.

Do not substitute AD9991KCP, AD9991KCPZ, and AD9991KCPZRL solely because the package drawings look alike. Confirm the manufacturer ordering information, operating-temperature grade, lead finish, lifecycle state, electrical limits, and qualification requirements. The package-compatible alternatives listed for this legacy device retain the same general CCD-processing architecture, but production approval still requires an engineering review and board-level validation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the AD9991KCP is a camera and imaging interface IC rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD9991KCP datasheet AD9991KCP datasheet pdf AD9991KCP pinout AD9991KCP specifications AD9991KCP replacement AD9991KCP equivalent AD9991KCP vs AD9991KCPZ AD9991KCP cross reference AD9991KCP 56-LFCSP-VQ AD9991KCP CCD signal processor AD9991KCP 10-bit 27 MHz ADC AD9991KCP digital still camera AD9991KCP price AD9991KCP stock Analog Devices AD9991KCP

Các bộ phận và thuật ngữ liên quan

Analog Devices AD9991KCP AD9991KCPZ AD9991KCPZRL CCD signal processor sensor-detector interface interface IC semiconductor charge-coupled device 10-bit analog-to-digital converter 10-bit variable gain amplifier correlated double sampling black-level clamp precision timing generator 4-phase vertical transfer clock 6-phase vertical transfer clock digital still camera camcorder machine vision barcode scanner 56-LFCSP-VQ QFN family surface mount 800 ps timing resolution 27 MHz sampling rate
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ