AD9991KCP - 10-Bit CCD Signal Processor | Analog Devices
MPN: AD9991KCP ✗ 停產AD9991KCP 概覽
A CCD signal processor is an integrated interface IC that conditions analog pixel signals and manages the clocks required to transfer charge through a charge-coupled device. In the electronic hierarchy, it belongs to interface ICs and sensor-detector interfaces. Its purpose is to translate a CCD output into a digitized, gain-controlled image signal while synchronizing horizontal and vertical transfer clocks with the imaging system.
The AD9991 combines a 10-bit variable gain amplifier, correlated double sampling, black-level clamp, and a 10-bit 27 MHz A/D converter. It supports both 4-phase and 6-phase vertical transfer clocks. The programmable timing generator can adjust high-speed clocks with 800 ps resolution, helping camera and imaging designers establish repeatable pixel timing without implementing a separate timing-control system.
Its integrated architecture reduces the number of discrete analog and digital blocks required around a CCD. Correlated double sampling rejects much of the reset noise present in CCD pixel output, while the variable gain amplifier accommodates different scene illumination levels. The 10-bit converter provides 1,024 quantization levels for the digitized analog signal, and the black-level clamp helps establish a stable black reference before image processing.
The AD9991 was designed for digital still cameras and camcorders, where CCD sensors require coordinated transfer clocks, analog gain control, black-level correction, and high-speed digitization. The same signal chain can support industrial imaging, barcode-scanning optics, machine-vision cameras, and other CCD-based systems when their sensor timing and electrical requirements are compatible with the device.
PCB implementation requires careful attention to the 56-lead LFCSP-VQ footprint, exposed-pad thermal design, analog input routing, and clock-signal integrity. Follow the manufacturer datasheet for the complete pin-description table, recommended decoupling, clock-generation settings, and exposed-pad land pattern. Verify sensor timing, serial interface mode, operating supply rails, and digital I/O levels before finalizing a new design.
This page combines the core AD9991KCP specifications, a source-linked datasheet reference, practical application guidance, and a package-compatible replacement assessment. It also distinguishes the KCP ordering code from the related KCPZ and KCPZRL variants so engineers can review temperature, packaging, and qualification requirements before committing a legacy imaging design to procurement.
直接替換替代品,適用於 AD9991KCP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
AD9991KCPZ
✅ 直接替換📋 參考替代品(不在目錄中)
AD9991KCPZRL
✅ 直接替換📋 參考替代品(不在目錄中)
AD9991KCP 最大額定值與電氣特性
| Product Type | 10-bit CCD signal processor with precision timing generator |
| ADC Resolution | 10 bit |
| ADC Conversion Rate | 27 MHz |
| Variable Gain Amplifier Resolution | 10 bit |
| Vertical Transfer Clock Support | 4-phase and 6-phase |
| Precision Timing Adjustment | 800 ps |
| Signal Conditioning | Correlated double sampling |
| Black-Level Control | Black-level clamp |
| Interface Function | CCD analog front end with programmable timing generation |
| 封裝 | 56-lead LFCSP-VQ, 8 mm x 8 mm |
| 安裝類型 | Surface mount |
| Primary Application | Digital still camera and camcorder CCD imaging |
| Logic Interface | Logic input and logic output |
AD9991KCP 56-lead lfcsp-vq, 8 mm x 8 mm 腳位配置指南
AD9991KCP(56-lead lfcsp-vq, 8 mm x 8 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: AD9991KCP.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD9991KCP 適用於 6 應用s: Digital Still Camera, Camcorder Imaging, Industrial CCD Machine Vision, Barcode Scanner Optics, Scientific CCD Camera, Security Camera.
Digital Still Camera
The AD9991KCP fits a digital still camera because it integrates the major functions required to condition and digitize CCD pixel output. Its 10-bit VGA supports scene-dependent gain adjustment, correlated double sampling reduces reset-related noise, and the black-level clamp establishes a stable reference before the 10-bit 27 MHz ADC performs conversion. The programmable timing generator supports 4-phase and 6-phase vertical transfer clocks and offers 800 ps timing adjustment for aligning sensor clocks with the imaging system. A designer should match the CCD output amplitude and timing to the device input requirements, then use the manufacturer timing-generator configuration and exposed-pad layout in the final PCB design.
推薦
Camcorder Imaging
AD9991KCP is suited to camcorder CCD imaging because it combines analog gain control, correlated double sampling, black-level correction, digitization, and sensor-clock generation in one signal processor. The 10-bit VGA allows exposure-chain gain to be adjusted across changing scene brightness, while the 10-bit ADC samples the conditioned CCD output at 27 MHz. Support for both 4-phase and 6-phase vertical clocking provides flexibility when matching different CCD transfer architectures. The precision timing core can adjust high-speed clocks by 800 ps, supporting repeatable synchronization between the CCD, processor, and downstream image pipeline.
推薦
Industrial CCD Machine Vision
The AD9991KCP can serve as the CCD conditioning and timing device in an industrial machine-vision camera when the image sensor's transfer scheme is compatible. Correlated double sampling helps reject reset noise, the 10-bit VGA accommodates the usable analog range of the sensor, and the 10-bit 27 MHz ADC produces the digitized pixel stream. Its 4-phase or 6-phase vertical-clock support allows the camera designer to match the CCD architecture rather than build a separate timing controller. For industrial deployment, verify the device's operating-temperature grade, calibration requirements, environmental qualification, and CCD-specific timing constraints before production release.
推薦
Barcode Scanner Optics
AD9991KCP can be used in a CCD-based barcode scanner when the selected sensor uses a vertical transfer scheme supported by the device. The 10-bit variable gain amplifier can bring the reflected-light signal into the ADC's usable range, while correlated double sampling and the black-level clamp support stable extraction of the optical signal. The integrated timing generator produces the required camera clocks and permits 800 ps adjustment for sensor and system synchronization. Because barcode imaging depends on consistent sensor timing and low channel-to-channel variation, engineers should retain the manufacturer's clock configuration and use the same calibration sequence in the finished scanner.
推薦
Scientific CCD Camera
AD9991KCP is applicable to a scientific or metrology camera built around a compatible CCD sensor. Its correlated double sampler reduces offset-like reset noise, the 10-bit VGA provides adjustable analog gain, and the black-level clamp supports deterministic dark-reference calibration. A 10-bit ADC operating at 27 MHz converts the conditioned pixel signal for transfer into a digital image processor. The precision timing generator supports both 4-phase and 6-phase vertical transfer clocks and 800 ps clock adjustment, which can simplify synchronization with the CCD array. Measurement accuracy still depends on optical design, sensor selection, calibration, noise characterization, and the stability of the external clock and power implementation.
推薦
Security Camera
AD9991KCP can support a legacy CCD security-camera signal chain where compatible vertical transfer clocks and a 10-bit digitized pixel stream are required. The variable gain amplifier adapts the CCD output across changing scene illumination, correlated double sampling suppresses reset noise, and the black-level clamp stabilizes the video baseline. The programmable timing generator provides 4-phase or 6-phase operation with 800 ps adjustment, reducing the need for separate clock-generation circuitry. The security-camera designer must still account for image sensor transfer timing, channel uniformity, lighting conditions, analog input routing, power integrity, and the synchronization requirements of the downstream video-processing electronics.
推薦
工程參考資料,適用於 AD9991KCP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD9991KCPZ | AD9991KCPZRL |
|---|---|---|---|
| Package | 56-LFCSP-VQ (8 mm x 8 mm) | 56-LFCSP-VQ (8 mm x 8 mm) | 56-LFCSP-VQ (8 mm x 8 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | 10-bit CCD signal processor with precision timing generator | 10-bit CCD signal processor | 10-bit CCD signal processor |
| ADC Resolution | 10 bit | 10 bit | 10 bit |
| ADC Conversion Rate | 27 MHz | 27 MHz | 27 MHz |
| Vertical Transfer Clock Support | 4-phase and 6-phase | 4-phase and 6-phase | 4-phase and 6-phase |
| Precision Timing Adjustment | 800 ps | 800 ps | 800 ps |
| Signal Conditioning | Correlated double sampling and black-level clamp | Correlated double sampling and black-level clamp | Correlated double sampling and black-level clamp |
| Variable Gain Amplifier Resolution | 10 bit | 10 bit | 10 bit |
| Ordering-Code Attributes | KCP | KCPZ ordering attributes | KCPZRL ordering attributes |
主要差異化特點
- Combines CCD signal conditioning, conversion, and timing generation (對比AD9991KCPZ)
- Precision adjustment for CCD transfer-clock timing (對比AD9991KCPZRL)
- Complete analog front end for digital imaging (對比AD9991KCPZ)
設計說明
Use the Analog Devices AD9991 datasheet's recommended 56-lead LFCSP-VQ land pattern and pin-description table for the PCB footprint. Keep the analog CCD input path short and isolated from the digital timing outputs, and route high-speed clock lines away from sensitive analog nodes. The exposed pad must connect to the intended ground plane and thermal-copper structure rather than being treated as an unused mechanical feature.
CCD clock edges and the 27 MHz conversion process require controlled routing because timing jitter or clock-to-analog coupling can affect pixel-data quality. Match the manufacturer's clock-generation configuration, keep clock traces away from the CCD analog input and reference nodes, and use a solid ground reference under the device. Validate sampling relationships with the target CCD using an oscilloscope before adjusting gain, clamping, or timing parameters in the final camera.
Do not substitute AD9991KCP, AD9991KCPZ, and AD9991KCPZRL solely because the package drawings look alike. Confirm the manufacturer ordering information, operating-temperature grade, lead finish, lifecycle state, electrical limits, and qualification requirements. The package-compatible alternatives listed for this legacy device retain the same general CCD-processing architecture, but production approval still requires an engineering review and board-level validation.
合規資訊
The available product records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the AD9991KCP is a camera and imaging interface IC rather than an automotive-qualified device.